About the Retrosound R-693
Retrosound makes it easy to replace the factory speakers in almost any classic, vintage, or even new car. Their RetroMod Series speakers feature extremely shallow chrome baskets designed to fit into a wide variety of standard speaker locations. They may look old school, but Retrosound builds their speakers from the ground up, using the latest techniques and materials.
Each R-693 6"x9" speaker features a powerful neodymium magnet and a low-carbon steel chrome frame that form a strong foundation. The stiff polypropylene woofer cone with its Santoprene surround delivers powerful performance while standing up to heat and humidity. The Mylar dome tweeter and midrange driver broadcast detailed highs and mids without sounding shrill. The tweeter assembly's low profile helps increase installation options, and features a flaming logo so it looks hot when installed without a grille.
Although efficient enough to play well with any receiver alone, these RetroMod speakers can handle the high power from aftermarket amplifiers to deliver your music with plenty of impact. Car makers put paper cone 6"x9" speakers in the dash or rear decks of many older vehicles. Replace them with these up-to-date Retrosounds, and your tunes will sound new again, just like your classic ride.
Priced per pair
- 6"x9" 3-way speakers (pair)
- polypropylene woofer cone with Santoprene surround
- Mylar dome midrange and tweeter
- power range: 2-100 watts RMS (200 watts peak power)
- frequency response: 40-21,000 Hz
- sensitivity: 90 dB
- top-mount depth: 2-7/16"
- grilles included
- warranty: 1 year
- MFR # R-693
What's in the box:
- Two 3-way 6x9 speakers
- 2 Grilles
- Two 12' Lengths of speaker wire
- Eight 1-1/2" Self tapping screws
- 8 Speed clips
- Owner's manual
Customer reviews for Retrosound R-693
Average review:5.0 out of 5 stars
Thanks for submitting your review
More details on the Retrosound R-693
Features & specs
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||90|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||40 - 21k Hz|
|Minimum RMS Wattage||2|
|Maximum RMS Wattage||100|
|Peak Power Handling (Watts)||200|
|Top-mount Depth (Inches)||2 7/16|
|Bottom-mount Depth (Inches)||2 7/8|
|Cutout Diameter or Length (inches)||0|
|Mounting Height (Inches)||0.474|
Woofer: The speakers feature poly cone woofers with Santoprene surrounds.
Midrange/Tweeters: The tweeters and midranges are low profile Mylar domes.