About the RetroSound S-52

New school speakers for an old school ride
For most classic car owners, authenticity matters. Good thing RetroSound knows 20th century rides so well — their S-52 5-1/4" speakers are an ideal fit for select vintage cars. Each speaker uses a polypropylene woofer with a treated foam surround for accurate playback and durability in the face of the extreme temperature swings in your car, along with a Mylar tweeter that adds clean, crisp highs.
With power handling up to 25 watts RMS, you'll get satisfying performance from these speakers whether you're powering them with a factory radio or an outboard amplifier. Use them to customize a classic vehicle or to upgrade the sound in a newer car — either way these RetroSound speakers fit the bill.
Grilles are not included, but you can purchase 5-1/4" grilles for custom installations.
Product highlights:
- 5-1/4" 2-way car speakers
- polypropylene woofer cone with foam surround
- Mylar tweeter
- power range: 2-25 watts RMS (50 watts peak power)
- frequency response: 50-21,000 Hz
- sensitivity: 87 dB
- top-mount depth: 1-7/8"
- grilles not included
- warranty: 1 year
- MFR # S-52
What's in the box:
RetroSound S-52 owner's manual
- Two 2-way speakers
- Two 12' Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- Eight 1-1/8" Self tapping screws
- 8 Speed clips
- Owner's manual
Customer reviews for RetroSound S-52
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the RetroSound S-52

Features & specs
General | ||
---|---|---|
Speaker Size | 5 1/4 | |
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 4 | |
Tweeter Composition | Mylar | |
Woofer Composition | Polypropylene | |
Woofer Surround | Foam | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 50 - 21k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 25 | |
Peak Power Handling (Watts) | 50 | |
Top-mount Depth (Inches) | 1 7/8 | |
Bottom-mount Depth (Inches) | 2 5/16 | |
Cutout Diameter or Length (inches) | 4 11/16 | |
Mounting Height (Inches) | 0.415 |
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Easy to install with adapters that come with them free
Brian from Ba Beach