About the Accele USBRCHDMID

What's in the box:
- 4.0' USB-C/HDMI extension cable
- Mounting bracket
- 2 Threaded collars
- Rubber cap
- 4 Screws
Other info:
- MFR # USBRCHDMID
- Item # 074USBCHDM
More details on the Accele USBRCHDMID

Product Research
Features
HDMI & USB Extension Cable: The Accele 4' HDMI & USB-C extension cable with mounting bracket (part # USBRCHDMIDI) connects to the microHDMI input and USB-C port on the back of your in-dash head unit and provides a convenient connection for your HDMI component and USB-C device.
- This extension will support Apple CarPlay on in-dash receivers that are equipped with a 1.5A USB-C port. It is not compatible with Apple CarPlay receivers with USB-C ports rated lower than 1.5A. However, this extension cable should not be used in conjunction with another USB extension cable (regardless of USB port rating).
- This extension cable does not support Android Auto.
Male & Female Connectors: The 4' HDMI & USB extension cable features male and female connectors. There is a male microHDMI connector and a female HDMI input. There is also one male USB-C connector and one female USB-C port. The male connectors plug into your head unit's rear-panel ports, while your devices are plugged into the female jacks of HDMI & USB extension cable.
Mounting Options: The Accele HDMI & USB-C extension cable with mounting bracket offers two mounting options.
- Flush Mount: The female end of the extension cable features a flush mountable design. You can simply drill a 1.0" hole at the desired mounting location and fit the female end of the cable into the hole. A threaded mounting collar secures the cable in place.
- Mounting Bracket: A mounting bracket is also included to surface mount the female end of the cable using the four supplied screws. Once the surface mount bracket is installed, the female end of the cable fits into the bracket. A threaded collar secures the cable to the mounting bracket.
Rubber Caps: A rubber cap is provided to protect the female HDMI & USB-C connectors of the cable.
Dimensions:
- Mounting Bracket:
- Width = 2.125"
- Height = 2.0"
- Depth = 2.25"
- Flush Mount:
- Outer Diameter = 1.25"
- Mounting Height= 0.25"
- Cutout = 1.0" (diameter) x 1.5625" (depth)
- Cable Length: 4'
Loading...
Loading accessories...
Customer Q&A
8 questions already asked
Loading...
Loading articles...