About the Focal Performance 165AS

Highlights:
General:
- two 6-1/2" DFS woofers, two TN43 inverted-dome tweeters, and external crossovers
- non-resonant ABS/fiberglass woofer basket
- wire mesh grilles included
Specifications:
- 6-60 watts RMS power range (120 watts peak)
- frequency response: 60-20,000 Hz
- sensitivity: 91.3 dB
- impedance: 4 ohms
- top-mounting depth: 2-9/16"
Other info:
- warranty: 1 year
- MFR # 165AS
- Item # 091165AS
What's in the box:
Focal Performance 165AS owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two woofers
- Two inverted dome tweeters (each with 18" length of speaker wire attached)
- 2 Flush mount tweeter cups (installed)
- 2 Angled surface mount tweeter cups
- 2 Crossover networks
- 2 Tweeter lock washers
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Woofer mounting gaskets
- 8 Speed clips
- Eight 1" Self-tapping pan head screws
- Four 5/8" Self-tapping flat head screws
- 4 Machine screws (each with a lock washer and flat washer attached)
- 4 Nuts
- Owner's manual (English/ French)
More details on the Focal Performance 165AS

Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Driver Design | 2-way | |
Woofer Design | Cone | |
Woofer Material | DFS | |
Woofer Surround | Butyl Rubber | |
Midrange Design | --- | |
Midrange Material | --- | |
Tweeter Design | Inverted Dome | |
Tweeter Material | Aluminum | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 4 | |
Weather-resistant | No | |
Grilles Included | Black, Metal mesh, Plastic frame | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87.25 | |
Sensitivity at 2.83 volts | 91.3 | |
Frequency Response | 60 - 20k Hz | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 2 9/16 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 5 9/16 | |
Mounting Height (Inches) | 0.38 | |
Frame Width | 6.482 | |
Frame Length | 6.482 |
Product Research
Woofer
Tweeter
Crossover
Dimensions
Woofer
Cone Material: The Dual Fiberglass Structure Membrane (DFS) is a light, rigid, woven glass fiber woofer cone. The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the higher frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Basket: The woofer features an ABS basket reinforced with 20% fiberglass.
Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.
Size Classification Note: Some manufacturers, including Focal, call this size speaker a 6-1/2". Because it requires a larger cutout than a standard 6-1/2" speaker, Crutchfield has traditionally referred to this size woofer as a 6-3/4". Please enter your vehicle information to confirm fit.
Tweeter
Inverted Dome Tweeter: The tweeter is an inverted aluminum and dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.
Mounting Options: The tweeter can be surface or flush mounted using the included adapters. Focal recommends flush mounting, but the included angled cup allows surface mounting at approximately 20° or approximately 40°. The top of the angle mount cup and the bottom of the flush mount cup can be combined to create another surface mount (non-angled).
Crossover
Components: Focal uses audiophile grade polypropylene capacitors and air core inductors to ensure high definition and a dynamic sound quality.
Tweeter Level: You can adjust the output level of the tweeter on the crossover to -6 dB, -3 dB, or 0 dB.
Crossover Slopes: The crossover uses 2nd order, 12 dB per octave low-pass and high-pass filters. The crossover frequency for both is 5,000 Hz.
Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.3" wide.
Dimensions
Tweeters:
Flush Mount | Surface Mount | 20° Surface Mount | 40° Surface Mount | |
---|---|---|---|---|
Mounting Height | 0.174" | 0.965" | 1.192" | 1.524" |
Depth | 0.875" | 0.667" (screw depth) | 0.675" (screw depth) | 0.675" (screw depth) |
Frame Diameter | 1.98" | 1.775" | 1.77" | 1.77" |
Cutout Diameter | 1.79" | N/A | N/A | N/A |
Crossover:
- Width: 3.16"
- Height: 1.375"
- Depth: 4.515"
Loading...
Loading accessories...
Customer Q&A
13 questions already asked
Loading...
Loading articles...
What beautiful speakers ooo my god! I put theze in my front doors and stock tweeter location and coaxials in rear doors in 2020 ridgeline. They sound sooooo good . I will be upgrading the factory amp to push theze better! If u want epic clean sound then u need focal. Only speakers ill buy!
Christopher from Enfield, CT