About the Focal K2 Power 165KRX2
K2 Power speakers — engineered for superb sound
K2 Power speakers — engineered for superb sound
At Focal, all that matters is music. Focal's sound gurus engage in intensive listening sessions as they design a new line of speakers, making it their mission to create products that deliver uncanny realism, sweeping dynamics, and breathtaking depth. During the hands-on production process, they test every model meticulously to ensure that they meet Focal's exacting standards.
Focal's "Power Hi-Fi" philosophy
The K2 Power 165KRX2 6-1/2" component speaker system bears the hallmarks of Focal's "Power Hi-Fi" philosophy. Nimble woofers made from Aramid and glass fibers demonstrate the control needed to reproduce delicate classical passages, yet they'll handle the power needed to drive your bass-heavy music with authority. The sturdy zinc-aluminum alloy baskets are non-magnetic so they won't interfere with the speaker's own electronics. And this 2-ohm system extracts maximum power from your stereo or amp so you'll get a little more punch from your system.
Inverted dome tweeter design
Focal's 2" inverted dome tweeters act like little woofers, dispersing the highs in a wide pattern to create an exceptionally natural soundstage. K2 Power crossovers use hand-made components developed by Focal to deliver an ideal blend of the highs and lows for a dynamic stereo image. The 165KRX2's crossover features three levels of tweeter control, a tweeter "slope softening" selector, and two levels of midrange control so you can dial in the sound to your car's environment.
Important Note: These Focal K2 Power speakers use a low impedance design to pull more power safely from your car stereo or amplifier. This design is compatible with virtually all factory and aftermarket stereos.
Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.
Product highlights:
- component speaker system includes two 6-3/4" woofers, 2 tweeters, 2 external crossovers, and 2 woofer grilles
- K2 composite woofer cone (Aramid, foam, and glass fiber)
- butyl rubber surround
- 2" woven Aramid fiber inverted-dome tweeter
- 2-way external crossover with 3 tweeter levels, 2 tweeter slopes, and 2 midrange level settings
- 2-ohm impedance
- power range: 6-100 watts RMS (200 watts peak power)
- frequency response: 70-20,000 Hz
- sensitivity: 93 dB @ 2.83 V
- mounting depth: 3-1/16"
- grilles included
- warranty: 1 year
- MFR # 165KRX2
What's in the box:
Focal K2 Power 165KRX2 owner's manual
- Two 6-3/4" Woofers
- Two inverted dome tweeters (with attached 22" length of speaker wire)
- 2 Tweeter flush mount cups (installed)
- 2 Tweeter angle mount adapters
- 2 Crossover networks
- 2 Woofer grilles
- 2 Woofer grille mounting rings
- 2 Black tweeter grilles (installed)
- 2 Silver tweeter grilles
- 2 Woofer mounting gaskets
- 16 Speed clips
- Twelve 5/8" Self-tapping screws (T10 Torx head)
- Twenty 1" Self-tapping screws (T20 Torx head)
- Owner's manual (English/ French)
- Serial number card
Featured video:
Customer reviews for Focal K2 Power 165KRX2
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal K2 Power 165KRX2
Features & specs
| General | ||
|---|---|---|
| Speaker Size | 6 1/2 | |
| Design | 2-way | |
| Tweeter Design | Inverted Dome | |
| Impedance (Ohms) | 2 | |
| Tweeter Composition | Woven Aramid Fiber | |
| Woofer Composition | K2 Composite | |
| Woofer Surround | Butyl Rubber | |
| Parts Warranty | 1 Year | |
| Labor Warranty | 1 Year | |
| Specifications | ||
| Sensitivity (1W at 1 meter) | N/A | |
| Sensitivity at 2.83 volts | 93 | |
| Frequency Response | 70 - 20k Hz | |
| Minimum RMS Wattage | 6 | |
| Maximum RMS Wattage | 100 | |
| Peak Power Handling (Watts) | 200 | |
| Top-mount Depth (Inches) | 3 1/16 | |
| Bottom-mount Depth (Inches) | 3 1/4 | |
| Cutout Diameter or Length (inches) | 5 9/16 | |
| Mounting Height (Inches) | 0.404 | |
Product Research
Woofer
Tweeter
Crossover
Dimensions
Woofer
K2 Cone: The woofer cone is a sandwich composite consisting of a foam core, a structural glass fiber bottom layer, and a Kevlar top layer. This combination of materials results in a rigid, light weight cone with excellent damping characteristics.
Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.
Phase Plug: The bullet-shaped aluminum phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.
Zamak Basket: The woofer features a cast Zamak basket. Zamak is a rigid alloy of Zinc, Aluminum, Magnesium, and Copper. Zamak is non-magnetic.
Voice Coil: The voice coil is wound around a 1-9/16" diameter low-mass Kapton former, ensuring no coil deformation.
Tweeter
Inverted Dome Tweeter: The TN53K tweeter is an Aramid fiber inverted dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions. The dispersion is controlled by the twin radius wave guides to improve staging and directivity.
Mounting Options: The tweeter can be surface or flush mounted. Focal recommends flush mounting and the flush mount cup is built onto the tweeter housing. The included angled cup allows surface mounting at approximately 30°.
Crossover
Components: Focal uses audiophile grade polypropylene capacitors and air core inductors to ensure high definition and a dynamic sound quality.
Tweeter Level: You can adjust the output level of the tweeter on the crossover to -6 dB, -3 dB, or 0 dB.
Midrange Level: Set the midrange output to High or Flat to match their position in the car. When the mids are installed low in the door, some of the output is absorbed by the upholstery and they benefit from the High output setting.
Crossover Slopes: The crossover allows slope adjustment of both the low-pass and high-pass filters. The woofer can be run full range and use its natural mechanical roll off, or be crossed over with a 12 dB per octave slope. The tweeter can be crossed over with a 12 dB or 18 dB per octave slope. The crossover frequency for both is 4,700 Hz.
Wiring: The inputs and outputs are screw terminals; they will accept bare wire or spade connectors up to 0.315" wide.
Dimensions
Tweeters:
| Flush Mount | Angled Surface Mount | |
|---|---|---|
| Mounting Height | 0.294" | 2.280" |
| Depth | 0.769" | 0.548" (screw depth) |
| Frame Diameter | 2.260" | 2.504" x 4.097" |
| Cutout Diameter | 1.984" | N/A |
Crossover:
- Width: 4.915"
- Height: 1.335"
- Depth: 3.742"
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...
These are incredible in the car. I have them hooked up for 200 watts @2ohm and they are running fine. I have the tweets at the lowest on the crossover. And the mids flat. Using a dsp to control everything. This is by far a bargain at this price! Get them while they are still in stock!!
Robert from PA