Name: Focal Integration ISS 570
Brand: Focal
SKU: 091ISS570
Rating: 5 (40 reviews)

Audiophile-grade engineering

Focal applies the same technology they use in their studio and audiophile-grade home systems to their Integration line of car speakers. The Integration ISS 570 component system includes 5"x7" woofers with cones made from Polyglass, a material that combines the warm sound of cellulose with the strength of glass, so they'll play accurately with no added resonances.

KEEP READING

You can use this angled tweeter mount to improve high-frequency dispersion in problem vehicles.

Audiophile-grade engineering

Adjustable tweeter

The separate Integration processed aluminum inverted dome tweeter features a built-in phase plug and wave guide, which act together to increase the power of high-frequency notes and improve the stereo soundstage. Focal includes a low-profile surface mount and an angled mount so you can set up the tweeter for the best possible imaging in your vehicle.

Built-in crossover networks

The crossover networks are built-in, so you don't have those extra boxes to install. Low-profile Integration speakers allow you to put Focal sound quality and construction into your vehicle, so you can enjoy a dramatic jump in performance over your old speakers.

Installation note: You'll need a pair of our universal backstraps to install the tweeters in the factory locations.

Grilles are not included; the factory grilles should be suitable for most applications.

READ LESS

Product highlights:

component speaker system includes two 5"x7" woofers and two tweeters
Polyglass woofer with butyl rubber surround
processed aluminum inverted dome tweeter
built-in crossovers
4-ohm impedance
5-60 watts RMS power range (120 watts peak)
frequency response: 65-20,000 Hz
sensitivity: 94.1 dB
woofer top-mount depth: 2-3/8"
grilles are not included; factory grilles are appropriate for most installations
warranty: 1 year
MFR # ISS 570

What's in the box:

Focal Integration ISS 570 owner's manual

Two woofers
Two inverted dome tweeters (with 5" length of speaker wire attached)
2 Surface mount tweeter housings (with tweeters installed)
2 Angled surface mount tweeter housings
Two 19" Lengths of speaker wire with in-line tweeter crossovers
Two 7" Lengths of speaker wire with in-line woofer crossovers
2 Woofer mounting gaskets
8 Speed clips
Four 7/8" Flathead screws
Eight 1" Self-tapping screws
Owner's manual (English/ French)
Focal window sticker

Loading reviews...

Average review:

40 reviews

Thanks for submitting your review

Most reviews are processed and published within 5 business days. You will receive a confirmation email once your review has been published.

Filter by rating

filterStar

Customer photos

Customer provided image, click to load a larger version.

Verified customer

Verified employee review

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Have questions for

Crutchfield response

Was this helpful?

<< >>

Researched by Crutchfield's Pat M.

Features & specs

General
Speaker Size	5X7
Design	2-way
Tweeter Design	Inverted Dome
Impedance (Ohms)	4
Tweeter Composition	Aluminum
Woofer Composition	Polyglass
Woofer Surround	Butyl Rubber
Parts Warranty	1 Year
Labor Warranty	1 Year
Specifications
Sensitivity (1W at 1 meter)	88.7
Sensitivity at 2.83 volts	94.1
Frequency Response	65 - 20k Hz
Minimum RMS Wattage	5
Maximum RMS Wattage	60
Peak Power Handling (Watts)	120
Top-mount Depth (Inches)	2 3/8
Bottom-mount Depth (Inches)	2 3/4
Cutout Diameter or Length (inches)	0
Mounting Height (Inches)	0.329

Product Research

Woofer
Tweeter

Woofer

Polyglass Cone: The woofer cone has a cellulose pulp base and is coated with a uniform deposit of hollow glass microballs. The addition of the Polyglass layer significantly increases the cone's rigidity without adding much weight. This combination takes advantage of the accuracy and neutrality of the hard outer surface, but maintains the superior damping characteristics of the cellulose pulp.

Surround: The butyl rubber surround is resistant to ultraviolet rays, temperature extremes, and humidity to add to the speaker's reliability and longevity.

Phase Plug: The bullet-shaped phase plug in the center of the woofer ensures a smooth, flat off-axis frequency response by preventing the high frequency sound waves emanating from one side of the cone from interfering with sound waves from the other side of the cone.

Voice Coil: The voice coil is wound around a 1" diameter low-mass Kapton former, ensuring no coil deformation.

Mounting Applications: Focal describes this speaker as a 5x7, but it also fits many 6x8 applications. Please check the Crutchfield Vehicle Selector to confirm fit.

Crossovers: The included 7" woofer wires have integrated crossovers. The woofer ends of the wires have female quick-slides that easily connect to the woofer terminals.

Tweeter

Inverted Dome Tweeter: The tweeter is an inverted aluminum dome, producing a broad sound stage. The tweeter has a Neodymium magnet to provide a powerful magnetic field for the voice coil, while still maintaining the tweeter's compact dimensions.

Mounting Options: The tweeters include two types of surface mount housings, one low profile and one angled:

	Flush Mount	Low Profile Surface Mount	Angled Surface Mount
Mounting Height	0.3"	0.894"	1.933"
Mounting Depth	0.55"	0.875" (screw depth)	0.875" (screw depth)
Frame Diameter	1.871"	1.88"	N/A
Cutout Diameter	1.67"	N/A	N/A
Width	N/A	N/A	1.895"
Surface Depth	N/A	N/A	2.839"

Crossovers: The included 19" tweeter wires have integrated crossovers. The tweeter ends of the wires have quick-slide terminals that easily connect to the wires soldered to the tweeters. The input end of each wire has three leads, a negative and two positives. The positive leads are labeled Car and Display, with a lower output level from the Car lead (useful because the placement of the woofer in a typical car installation requires the tweeter output be lowered to maintain a balanced sound).

Loading accessories...

4 questions already asked

What is the RMS of each speaker? I read on other sites the tweeter is 15rms and the woofer is 60rms. Is this true?? I had anticipated buying an amp that would push 75rms x 4 assuming 60rms per speaker. Thank you for your help

dustin Jan 18, 2018

1 answer

That is correct! I have two trucks.one is Ford excursion 7.3 diesel For pleasure.i install all 6 speakers my self, Except Twitter's.my other truck is Ford f250 7.3 diesel super dury for work, both have Components in the front focal 5x7 speakers. In the back i have focal 5x7 570 ac speakers on both trucks. I have jl audio amp hd900/5 Channel On both trucks. i took my trucks to a professional stereo shop for installation.both trucks sound Mazing! I couldn't be happier. I highly recommended, You will not be disappointed.i hope this help you make your mind and two other as well

tomas Jan 22, 2018

Is it possible to flush mount the tweeters for these?

kevan c Jun 09, 2016

4 answers

Yes. The tweeters can be flush mounted; that is, mounted without the tweeter housings.

thomas Jun 14, 2016

Kevan, I'm not sure about this model, but I have seen Focals flush mounted. Flush mount bracket does not come in this kit, but you might be able to get it from Focal separately.

chris Jun 09, 2016

Yes I used my existing factory tweeter mounts. I had to remove the outer casing and trim the hole in my factory panel a little and got s real nice snug fit. I have a 2011 f150. Love the speakers by the way! Good luck hope this helps

bradley Jun 09, 2016

Yes, mine are.

william Jun 09, 2016

Do the woofers come with grills?

mark Feb 15, 2015

3 answers

Nope

tomas Jan 22, 2018

yes

kevin Feb 23, 2015

I don't think so there still in the box opened briefly did not see anything they come sealed well

oscar Feb 16, 2015

Hi, to those who already bought the focal iss570 component speakers, I just bought a pair and had a quick install question- I assume that the in-line crossover/filters are "one-way" ....that is, the tweeter/woofer MUST go on one particular side of the in-line crossovers (whether that is upstream or downstream, etc), and your amp or stereo MUST go the other end of the crossover wires. I wanted to verify, with regards to the wires that have "crossovers" in them- for *both* the woofer and tweeter, should the side of wire with the exposed, tinned "plain old wire" be pointing towards the amplifier/stereo? And should the end of the wire with little connector/clip/grabby-pincher things be pointed towards the tweeter/woofer respectively? Thanks so much!

gregory Jan 17, 2015

4 answers

That's the way I installed them. They work great. I did not try it the other way.

stephen Jan 18, 2015

That is correct. Tinned wire makes it easier to solder or crimp. Soldered mine. Driving mine with MTX amp 60 watts rms. Great sound without the cross over headache.

jesse g. Jan 18, 2015

hey Greg, As long as you don't wire the woofer crossover to the tweeter, or the tweeter crossover to the woofer, the direction doesn't matter. I took the filters apart to examine and modify them. The woofer filter is a single inductor, and the tweeter is a capacitor in series with a single resistor. In fact, I replaced the little tiny capacitors in the tweeter filters with more expensive ones, and I'm pretty sure I put them back together with one of them the way it came and the other reversed in reference to the side of the circuit the resistor was on. I doesn't really change anything. Most capacitors, inductors, and resistors are +/- interchangeable. You also get the same electrical result if you have a series circuit with a capacitor on the + side and a resistor on the - side, or a resistor on the + side and a capacitor on the - side. It's all the same! Enjoy!

chris Jan 18, 2015

If memory serves me, the connectors are designed to clip directly to the speaker terminals.

robert Jan 18, 2015

Loading articles...