About the Focal Auditor RiP-250S

If bass is crucial to your good times, Focal's Auditor Series subwoofers will keep the good times rolling, and then some. Built to party hard in any system, these subs feature a durable cone and surround design that delivers Focal sound quality at a price that'll fit any budget.
The RiP 250S 10" sub features a glossy polypropylene cone that'll handle up to 250 watts RMS, while standing up to the ravages of heavy bass output. Its heavy-duty rubber surround keeps the cone properly centered when you drive it hard, and extra-long cone excursion means you'll get powerful, precise rendering of your lowest notes. Match it with a sealed enclosure, feed it plenty of power, and you'll rock the road.
Product highlights:
- 10" 4-ohm subwoofer
- polypropylene cone with rubber surround
- chrome magnet and rigid metal frame
- heavy-duty binding post terminals
- power range: 50-250 watts RMS
- peak power handling: 700 watts
- frequency response: 30-200 Hz
- sensitivity: 88 dB
- top-mount depth: 4-1/2"
- sealed box volume: 0.9 cubic feet
- warranty: 1 year
- MFR # RIPS 250
What's in the box:
Focal Auditor RiP-250S owner's manual
- One 10" woofer
- Six 1-3/8" Self-tapping screws
- Specification sheet
- Template
Reviews (8)
Customer reviews for Focal Auditor RiP-250S
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Focal Auditor RiP-250S

Features & specs
Features and Specs | ||
---|---|---|
Size | 10 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Polypropylene | |
Surround Material | Rubber | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
88 dB at 1 watt | |
Frequency Response | 35 - 500 Hz | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 700 | |
Top Mount Depth (inches) | 4 1/2 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 1/8 | |
Vas (liters) | 20.5 | |
Fs (Hz) | 42.14 | |
Qts | 0.63 | |
Xmax (millimeters) | 0 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.9 | |
Minimum Sealed Box Volume (cubic feet) | 0.7 | |
Maximum Sealed Box Volume (cubic feet) | 1.1 | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A |
Product Research
Features
Cone: The cone is made with reinforced polypropylene, providing durability while being lightweight and rigid. Combined with the high excursion rubber surround, the RIP 250S is resistant to extremes in temperature, humidity, and exposure to sunlight for excellent long term reliability.
Voice Coil: The 2" diameter, 4-layer voice coil is wound on aluminum former to effectively dissipate heat, resulting in high thermal power handling.
Extended Pole Piece: The extended pole piece creates a broad magnetic field for superior power handling, precise voice coil control, and low distortion.
Bumped Back Plate: The bumped back plate lets the voice coil reach maximum excursion without bottoming-out.
Terminal Posts: The speaker terminals will accept pin connectors, single banana plugs, spade connectors, and bare wire up to 8 gauge.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
But WOW! I put one of these in my 2006 crew cab Sierra paired with the JVC 4302 bridged amp and it sounds great! Great depth to music, amp needs alittle tweeking still, but for the price, it sounds just as good as my old set of Fosgate Punch 10's......defently would buy them again!
Matt from Taylor, Florida