About the JVC CW-DR1040ML

Product highlights:
- 10" marine subwoofer
- multi-color RGB LED lights with included remote control
- 4-ohm impedance
- polypropylene cone with rubber surround
- UV-resistant grille included
- designed for free-air (infinite baffle) use (also works in sealed enclosures)
- IPX6 waterproof rating
Specs:
- power handling: 300 watts RMS (1300 watts peak power)
- sensitivity: 84 dB at 1 meter per 1 watt
- frequency response: 40-300 Hz
- impedance: 4 ohms
- mounting depth: 5.5"
- top-mount depth: 1.81"
- cutout diameter: 9.19"
- warranty: 1 year
- MFR # CW-DR1040ML
- Item # 105DR1040M
What's in the box:
JVC CW-DR1040ML owner's manual
If you need assistance accessing this owner's manual, please give us a call.- 10" Subwoofer (fixed grille)
- 10" Link harness
- Remote control (CR2025 battery installed)
- 6 Screws
- 6 Speed-clips
- 2 Rubber sleeves
- Instruction Manual
- Template
- Warranty Sheet
More details on the JVC CW-DR1040ML

Features & specs
Features and Specs | ||
---|---|---|
Size | 10-inch | |
Impedance (Ohms) | 4 | |
Cone Material | Polypropylene | |
Surround Material | Rubber | |
Basket Material | Polymer | |
Grille | Black plastic, Fixed | |
Free-Air | Yes | |
Dual Voice Coil | No | |
Sensitivity |
84 dB at 1 watt | |
Frequency Response | 40 - 300 Hz | |
Max RMS Power Handling | 300 | |
Peak Power Handling (Watts) | 1300 | |
Top Mount Depth (inches) | 5 1/2 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 9 3/16 | |
Frame Width | 10.8125 | |
Frame Length | 10.8125 | |
Vas (liters) | 37.3 | |
Fs (Hz) | 43.76 | |
Qts | 0.27 | |
Xmax (millimeters) | 2.9 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 2.02 | |
Minimum Sealed Box Volume (cubic feet) | N/A | |
Maximum Sealed Box Volume (cubic feet) | N/A | |
Ideal Ported Box Volume (cubic feet) | N/A | |
Minimum Ported Box Volume (cubic feet) | N/A | |
Maximum Ported Box Volume (cubic feet) | N/A | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A |
Product Research
Features
IPX6 Rated: The JVC CW-DR10140ML offers a tough design that conforms to the IPX6 standard, so you can enjoy high-quality bass even under the harsh environment of marine and motorsports use. The IPX6 rating guarantees water and dust ingress protection, so the woofer can withstand marine and outdoor environments.
Note: The IPX6 rating is only for the woofer. The included remote control is not IPX6 rated.
10" Polypropylene Woofer: The CW-DR10140ML features a 10" polypropylene cone with rubber surround and resin molded frame basket. Its large magnet produces high braking force, while the 4-layer voice coil can handle a large amount of power input. In addition, the Magnetic Circuit, whose volume has been increased by 35% compared to the conventional design, has greatly increased the driving force to move the diaphragm. Plus, the durability of the vibration system has been greatly enhanced to handle the high input power of 300W RMS. This all results om clear and powerful bass sound reproduction.
LED Illumination: In addition to great bass sound, the CW-DR1040ML is also equipped with LED Illumination so you can choose your favorite color that suits your mood or music. Using the included remote control, you can from 21 different colors patterns with varying speeds and brightness. The LED illumination feature will require a separate hardwired power and ground connection.
Remote Control: The included RF remote can be used in sunlight and does not require direct line of sight to the subwoofer. It has a wireless range of approximately 98' (30m). The battery is powered by a single CR2025 3V battery that comes pre-installed.
Note: A 10' harness (4-pin) is included to link up to twelve CW-DR1040ML subwoofers, so you can control them all with a single remote. When linked the subwoofers will display the same color pattern. You cannot control subwoofers individually.
Mounting Options: The JVC CW-DR10140ML is designed for free-air application, but can also be installed in a sealed enclosure that measures 17.0" (w) x 17.0" (h) x 16.0" (d) with a 2.02 cu.ft internal volume and 9.1875" (diameter) mounting hole. The box should be made of 3/4" thick MDF (medium density fiberboard) or high density particle board. The grille is fixed and is not removable. The woofer is held in place by six screws.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...