Features

Dynamic Balance Drivers: Dynamic Balance is a proprietary Polk Audio technology using laser imaging to determine what combination of speaker materials create the least amount of resonance. Eliminating resonance in speakers results in a wide, smooth response and low distortion. Using just the right materials enables Polk to eliminate issues that reduce speaker performance and tune out performance-robbing resonances before they occur. Dynamic Balance ensures a rich, clean, full-range sound no matter what you're listening to. The Polk Signature Elite ES60 floor-standing loudspeaker incorporates a Dynamic Balance two-way driver array with one 1" tweeter and three 6.5" woofers.

• Hi-Res 1" Terylene Tweeter: The Signature Elite ES60 floor-standing loudspeaker utilizes Polk's newly designed 1" Terylene tweeter to deliver clear and detailed high-end response for realistic reproduction of vocals and instruments. It will support high frequencies up to 40kHz to perfectly reproduce the latest high-resolution audio files with improved audio extension, earning Hi-Res Audio Certification.
• Triple 6.5" Mica-Reinforced Polypropylene Woofers: The Signature Elite ES60 floor-standing speaker employs three 6.5" Dynamic Balance low distortion mica-reinforced polypropylene cone woofers for clean, clear bass, better linearity, and increased dynamic midrange and midbass. This mica-reinforced polypropylene woofers feature butyl rubber surrounds, massive ceramic motor structures, and high-temperature Conex fiber spiders that combine to create drivers of exceptionally high efficiency, for clean, clear bass, better linearity, lower distortion, and greater durability.

Phase-Optimized Precision Crossover: The Signature Elite Series floorstanding speaker employs a high-performance two-way, phase-optimized precision crossover (2.0kHz) for seamless blending and optimum time alignment of the tweeter & woofers, creating a lifelike soundstage.

Power Port Technology: The Signature Elite ES60 floor-standing incorporates Polk's Power Port technology with a specially designed down-firing port. Power Port technology smoothly transition air flow from inside the speaker into your listening area for deep, extended bass impact while minimizing turbulence and distortion. Polk's patented Power Port technology delivers 3dB more bass response than a traditional ported speaker. Because the port is located on the bottom of the floor-standing speaker, its not necessary to position to the loudspeaker a certain amount of feet from wall - giving you greater placement flexibility.

Non-Resonant Enclosure: The floor-standing speaker's strong, rigid and acoustically inert enclosure reduces unwanted internal standing waves for less audible coloration. And non-resonant Meddite MDF construction, extra bracing, and a thick front baffle ensure a more lifelike sound. The enclosure's curved edges not only look cool, they reduce standing waves inside the cabinet for less audible coloration. The enclosure comes in a beautiful black, white, or walnut wood-grain vinyl finish.

Anti-Diffraction Magnetic Grille: The Signature Elite ES60 includes an anti-diffraction magnetic grille for unaltered sound. The integrated magnets make it easy to attach and remove the grille from the floor-standing speaker.

Dual 5-Way Binding Posts: The floor-standing loudspeaker has two sets of 5-way binding posts connected by jumpers. Using the dual 5-way binding posts, you can bi-amp or bi-wire the speakers. The 5-way binding posts will accept bare wire (up to 10AWG), pin-connectors, spade-connectors, and banana plugs (single or dual). The speaker terminals are color coded for easy identification between positive (red) and negative (black).

• Bi-Wiring: Bi-wiring can provide noticeable improvements in the overall transparency of your loudspeakers. Run separate speaker wires to the low & high frequency drivers from a single amplifier (the upper set of binding posts are for the high frequency drivers; the lower set of binding posts are for the low frequency drivers).
• Bi-Amping: Bi-amping allows you to use separate amplifiers for the high & low frequency sections of your loudspeaker for greater dynamic range & lower distortion. We recommend that your separate amplifiers have identical gain to preserve the speaker's voicing balance.

Dual-Floor Compatible Feet: Customized for improved stability and bass coupling to the floor, the floor-standing loudspeaker's feet are designed for both carpet and hard surface floors. The feet come pre-installed and should not be removed.

Application & Placement: The Signature Elite ES60 floor-standing speakers can be used as front and/or surround speakers in a home theater setup. They can also be used in a simple stereo application. If your AV receiver offers built-in bass management, the ES60 should be set to "Large" for an unfiltered, full-range audio signal.

• Placement for Front Speakers: As a pair of front speakers in a home theater or stereo setup, create an equilateral triangle between the speakers and the listening position - with the speakers placed as far apart from one another as the listeners are sitting from them. You may also choose to angle the speakers toward the middle to support a more solid center image.
• Placement for Surround Speakers: As surround speakers, the ES60 should be placed on a side wall slightly behind the listening position. If you cannot place the speakers on the side walls, position them on the rear wall just behind the listening area.

Signature Elite Series: Polk designed its Signature Elite Series of loudspeakers to bring a big surround sound and a live music experience into the comfort of your living room at an affordable price. Featuring Hi-Res certification with a new high-resolution Terylene tweeter, redesigned Dynamic Balance drivers, precision crossovers, an anti-diffraction magnetic grille, modern cabinet styling and exclusive Power Port bass enhancing technology, Polk's Signature Elite series loudspeakers deliver crystal clear highs, detailed midrange, and deep bass; plus they look great in almost any decor. The Signature Elite Series by Polk consists of three floorstanding speakers, three bookshelf loudspeakers, one center-channel speaker, one LCR speaker, and a height-module speaker.

• Floorstanding Speakers: ES50, ES55, ES60
• Bookshelf Speakers: ES10, ES15, ES20
• Center-Channel Speaker: ES30
• LCR Speaker: ES35
• Height-Module Speaker: ES90