About the Infinity Kappa 463XF

Kappa quality
Kappa quality
Infinity designed and built their Kappa Series for audiophile tastes. These Kappa 463XF 4"x6" car speakers benefit from a refined design, Infinity's proprietary technology, and premium materials to deliver uncompromised audio quality. Plus, Infinity has added convenient features for getting just the right sound for your ride.
Edge-driven silk dome tweeters
Infinity employs an edge-driven design in their silk dome tweeters for a smoother, more open response and minimal distortion at high volume. Each tweeter also features a level control button so you can adjust the brightness to your taste. And the plate design with its separate woofer and tweeter gives you the sonic advantages of separate components in a format that's easy to install.
Plus One+ woofer technology
Kappa's glass fiber woofer will hold its shape when the power's cranked up, so you still get punchy and defined bass. Glass fiber weighs less than traditional materials, so you don't need a ton of power to drive this woofer either. Infinity's Plus One+ woofer technology extends the cone right up to the edge of the basket, giving you lots of surface area — and a bigger cone means more bass to complement the superior high-frequency response.
Awesome power handling, no matter the system
These 3-ohm speakers boast ultra-high sensitivity so that you can power them with a factory radio or aftermarket stereo, but you'll get your best results feeding them plenty of power from an outboard amp. Either way, these speakers' low impedance safely takes advantage of every watt of power available for exceptional performance. Enjoy Kappa sound quality at any volume.
Grilles are not included; the factory grilles should be suitable for most applications.
Product highlights:
- 4"x6" 2-way plate-style speakers
- Plus One+ glass-fiber woofer cone with hi-roll rubber surround
- edge-driven, silk dome tweeter
- 3-ohm impedance
- grilles not included
- handles up to 60 watts RMS (180 watts peak power)
- frequency response: 75-40,000 Hz
- sensitivity: 93 dB at 2.83 volts
- top-mount depth: 1-13/16
- warranty: 3 years
- MFR # INFSPKKA463XFAM
What's in the box:
Infinity Kappa 463XF owner's manual
- Two 2-way speakers
- 2 Adhesive backed foam gaskets
- 2 Adhesive backed Infinity logo badges
- Eight 1" Screws
- 8 Speed clips
- Template on box
- Installation manual
Customer reviews for Infinity Kappa 463XF
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Infinity Kappa 463XF

Features & specs
General | ||
---|---|---|
Speaker Size | 4X6 | |
Design | 2-way | |
Tweeter Design | Edge-Driven Dome | |
Impedance (Ohms) | 3 | |
Tweeter Composition | Silk | |
Woofer Composition | Glass Fiber | |
Woofer Surround | Rubber | |
Parts Warranty | 3 Years | |
Labor Warranty | 3 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | N/A | |
Sensitivity at 2.83 volts | 93 | |
Frequency Response | 75 - 40k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 180 | |
Top-mount Depth (Inches) | 1 13/16 | |
Bottom-mount Depth (Inches) | 2 1/8 | |
Cutout Diameter or Length (inches) | 0 | |
Mounting Height (Inches) | 0.37 |
Product Research
Features
Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and an increase in efficiency.
High-Output Design: The high output 3Ω voice coil design compensates for the high in-line resistance of small gauge factory wiring and extracts every watt from factory receivers, increasing overall system output and efficiency (relative to 4Ω speakers). The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers, designed to power a 3Ω load.
Edge Driven Dome Tweeters: Each speaker has an edge-driven silk dome tweeter. Edge-driven tweeters have better dispersion characteristics and allow for a lower crossover frequency than typical tweeters of the same size, which improves imaging. The result is improved vocals and musical clarity. The tweeter also has an output level switch; choose +0 dB (flat) or -3 dB.
The Infinity Kappa 463XF replaces these items

Infinity Kappa 64cfx
- Plus One+ glass-fiber woofer cone with hi-roll rubber surround
- edge-driven, soft dome tweeter
- handles up to 60 watts RMS (180 watts peak power)
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
Good sound from a small speaker Fits john deere 4044r 2021
Linus from Palmer, AK