About the Infinity Primus PR6502is
Enjoy your music again
Enjoy your music again
Vehicle manufacturers don't put much thought into stock stereo systems, and it shows. Uninspired vocals, muddy cymbals, and flabby bass are dead giveaways that you've got stock speakers. Install a set of Infinity's Primus PR6502is 6-1/2" speakers in your car and you'll notice a world of difference. Lifelike vocals, crisp cymbals, and well-defined bass await you, and cruising around town will be more enjoyable as you get pulled into your favorite tunes.
Built with home audio know-how
Infinity used technology from their popular Primus home speakers to design car speakers that offer strong performance without breaking the bank. A 3/4" edge-driven, textile dome tweeter broadcasts smooth high frequencies while the oversized, Plus One+ polypropylene woofer creates solid bass. The speakers' 3-ohm impedance safely draws extra power out of your factory radio, aftermarket stereo, or an external amplifier, so you'll get a little more punch from your system. Grilles are included.
- 6-1/2" 2-way car speakers
- Plus One+ polypropylene woofer cone with hi-roll rubber surround
- 3/4" edge-driven, textile dome tweeter
- 3-ohm impedance for extra power (compatible with virtually all factory or aftermarket car stereos)
- power range: 5-70 watts RMS (280 watts peak power)
- frequency response: 53-21,000 Hz
- sensitivity: 93 dB
- top-mount depth: 2-1/16"
- warranty: 1 year
- MFR # PR6502is
What's in the box:
- Two 2-way speakers
- 2 Grilles
- 2 Grille frames
- Eight 1" Self-tapping screws
- 8 Speed clips
- 2 Adhesive backed foam gaskets
- Template on box
- Owner's manual (English/ Portuguese)
Customer reviews for Infinity Primus PR6502is
Average review:4.5 out of 5 stars
Thanks for submitting your review
More details on the Infinity Primus PR6502is
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||3/4" Balanced Dome|
|Woofer Surround||Butyl Rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Sensitivity (1W at 1 meter)||N/A|
|Sensitivity at 2.83 volts||93|
|Frequency Response||53 - 21k Hz|
|Minimum RMS Wattage||5|
|Maximum RMS Wattage||70|
|Peak Power Handling (Watts)||280|
|Top-mount Depth (Inches)||2 1/16|
|Bottom-mount Depth (Inches)||N/A|
|Cutout Diameter or Length (inches)||5 1/16|
|Mounting Height (Inches)||0.75|
Plus One Woofer Cones: The Plus One speaker cones offer more surface area than other speakers that fit in the same size opening. This is accomplished by using a new basket design and hi-roll surround. The result is greater bass output and an increase in efficiency.
3-ohm Voice Coil: The Primus Series speakers feature 3-ohm voice coils to compensate for the high in-line resistance of small gauge factory wiring and extract every watt from the factory receiver, increasing overall system output and efficiency (relative to 4-ohm speakers). The speakers also benefit from increased power when you upgrade the wire and add aftermarket amplifiers capable of powering a 2-ohm load.
Power Handling: Although Infinity lists the continuous average RMS power handling as 70 watts, they also list the recommended power range as 5-125 watts RMS. We've opted to list the more conservative 70 watt RMS figure on the specifications page.
Mounting: Infinity markets these speakers as 6-1/2"; they will fit in standard 6-1/2" speaker openings (approximately 5" diameter), but they do not use the standard 6-1/2" speaker bolt pattern. In order to install them in standard 6-1/2" applications you must drill new screw holes. The speakers are easily installed in many standard 4-hole 6-3/4" applications with no modification.
6 questions already asked