About the JBL Apex PA1502

Product highlights:
- compact 2-channel amplifier
- 100 watts RMS x 2 at 4 ohms
- 150 watts RMS x 2 at 2 ohms
- 300 watts RMS x 1 bridged at 4 ohms (4-ohm stable in bridged mode)
- selectable high- or low-pass filter (60, 80, 120 Hz at 12 dB/octave)
- selectable bass boost (0, 6, 12 dB at 45 Hz)
- Class D amp technology (frequency response: 20-20,000 Hz)
- weather-resistant aluminum chassis
More Info:
- preamp and speaker-level inputs
- wire-to-RCA adapters for speaker-level inputs included
- wiring and hardware not included with amplifier
- 10-gauge power and ground leads recommended
- fuse rating: 25A
- dimensions: 9"W x 1-3/4"H x 3-5/16"D
- warranty: 1 year
- MFR # APEX PA1502
- Item # 109APEX150
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
JBL Apex PA1502 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- 2-Channel amplifier
- 2 Speaker to RCA adapters
- Two 25-amp ATO fuses (1 installed/1 spare)
- Four 5/8" Screws
- Four 5" Zip ties
- Owner's manual (English/ French/ Spanish/ Portuguese/ Chinese/ Japanese/ Korean)
- 2 Window stickers
More details on the JBL Apex PA1502

Product Research
Features
Auto Turn-on: When using speaker level inputs, the DC offset circuit in the amp senses when a signal is present and turns the amp on automatically.
Control Panel: The control panel is protected by a cover to help keep the controls dry, and to prevent unwanted adjustments.
- Input Level: 2-position switch; select High (speaker level) or Low (preamp level)
- Gain: rotary control; variable from 200mV to 6V with the input level switch in the low position and 500mV to 15V with the input level switch in the high position
- Crossover:
- X-Over: 3-position switch; select High Pass, Off (full-range), or Low Pass
- Frequency: 3-position switch; select 60 Hz, 80 Hz, or 120 Hz
- Bass Boost: 3-position switch; select 0 dB, +6 dB, or +12 dB; centered at 45 Hz; bass boost is only active when the X-Over switch is in the low pass position
Connections:
- Speaker Outputs: 2 pair of 8" speaker wires attached; 16-gauge
- Power: 8" wire attached; 14-gauge; ATO fuse holder wired in-line
- Ground: 8" wire attached; 14-gauge
- Remote Turn-on: 8" wire attached; 18-gauge
- RCA Inputs: one pair of stereo RCA inputs, on the end of a 6" pigtail; compatible with preamp level and speaker level signals (two speaker wire to RCA adapters included)
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
Bought this to drive 2 wakeboard tower speakers that I mounted on my pontoon boat. Great sound and easy to install. Still have some minor wire arrangement to do but so far so good.
James from Lake Orion, MI