About the JBL BassPro SL 2

Product highlights:
- powered subwoofer with heavy-duty ABS plastic enclosure
- 8" shallow-profile woofer
- Class D amplifier (125 watts RMS)
- 10-gauge amp wiring kit required (sold separately)
- controls:
- low-pass crossover variable from 50-120 Hz at 12 dB per octave
- variable bass boost (0 to +9 dB at 70 Hz)
- phase switch (selectable 0 or 180 degrees)
- speaker and line-level inputs
- frequency response: 35-120 Hz
- dimensions: 13-9/16"W x 2-7/8"H x 10-1/16"D
- warranty: 1 year
- MFR # SUBBPSL2AM
- Item # 109BASPRO2
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
JBL BassPro SL 2 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Powered 8" subwoofer (15A ATC fuse installed)
- 8" Speaker-level input harness
- Remote level control
- 16.5' Remote cable (RJ-25 connectors on both ends)
- Four 2-1/2" Hex-socket screws
- Hex-socket bit
- Two 1" Philips-head screws
- Quickstart guide
More details on the JBL BassPro SL 2

Features & specs
General | ||
---|---|---|
Enclosure Type | Sealed | |
Finish Material | ABS | |
Grille | Metal mesh | |
Connector Type | RCA, speaker-level | |
Quick-disconnect Plug | No | |
Bi-amp Inputs | No | |
Woofer Size (inches) | 8 | |
Woofer Material | Poly | |
Passive Radiator | None | |
Width | 13-1/2" | |
Height | 2-7/8" | |
Depth | 10-1/8" | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Frequency Response | 35-120 | |
Amplifier Power (RMS) | 125 watts | |
Maximum Wattage | --- | |
Sensitivity | --- | |
Impedance | --- | |
Second Voice Coil Impedance | --- | |
Crossover Point | 50-120 |
Product Research
Features
Enclosure & Driver: The JBL BassPro SL2 features a single 8" woofer in a compact sealed enclosure. The woofer driver features a polypropylene cone with a butyl rubber surround, mounted in a durable ABS enclosure that's compact enough for mounting under seats and in tight spaces.
Amplifier: The subwoofer enclosure is powered by a built-in 125 watt RMS Class-D amplifier. Class-D operation means the amp runs cooler and draws less current from the vehicle's electrical system.
High/Low Inputs: The BassPro SL2 includes a pair of RCA low-level signal inputs, accepting signals from 0.05V - 2.0V. If connecting to a factory headunit or radio without pre-amp outputs, a 2-channel speaker-level input harness is included, accepting signals from 0.5V - 20V.
Audio Sense: The Audio Sense switch, when set to On, allows the BassPro SL2 to power on when it senses voltage on the speaker-level inputs, eliminating the need for connecting a remote turn-on wire.
Crossover: The amplifier's low pass crossover point is continuously variable from 50 to 120 Hz; the crossover slope is 12 dB/octave.
Bass Boost: The bass boost circuit provides a variable (0-9 dB) signal boost centered at 70Hz.
Remote Level Control: A remote level control is provided, that can be mounted under a dash or console for easy adjustment of the bass level from the driver's location. The remote level control includes a 16.5' remote cable terminated in RJ-25 connectors on both ends.
Other Controls&Indicators:
- Phase: A two position switch (0° or 180°) allows the subwoofer's phase to easily be inverted .
- Level: A rotary knob adjusts the input signal level.
- Input Load: Used in conjunction with the speaker-level inputs, this 2-postition switch (High/Low) can be set to provide the lowest amount of noise with a high-level input signal. Generally, this will be set to the High position for most factory radios.
- Power LED: Lights to indicate unit is powered on.
- Protect LED: Lights to indicate a fault or short-circuit.
Connections:
- Remote Bass: RJ-25 jack for use with included remote bass level control.
- Fuse: A single 15 amp ATC fuse protects the amplifier.
- High Level Input: Accommodates the included 4-pin Molex high-level input harness.
- Power/Ground: Three set-screw terminals provide connections for Power, Ground, and Remote In, each accepting up to 8AWG wire.
The JBL BassPro SL 2 replaces these items:
- 8" shallow-profile woofer
- Class D amplifier (125 watts RMS)
- speaker and line-level inputs
Loading...
Loading accessories...
Customer Q&A
24 questions already asked
Loading...
Loading articles...
Phenomenal sound quality, and the fact that it fits practically anywhere in the car without taking up too much space is amazing. Fits under the driver seat on the 2019 Subaru Impreza sedan perfectly!
Thomas from Dowingtown, PA