Chat
Contact us
Close contact box
Connect ID #
615 596 918 4
Connect ID #
615 596 918 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Kenwood KAC-7201 150W x 2 car amplifier (New Stock)

Item # 113KAC7201

Along with a boatload of power, the KAC-7201 amp gives you the flexibility to handle just about any job, with high-...

Find what Fits your vehicle

Remove

Checking fit...

Along with a boatload of power, the KAC-7201 amp gives you the flexibility to handle just about any job, with high-...

Item # 113KAC7201

Shop all Kenwood Car Amplifiers

About the Kenwood KAC-7201

Erin B.
Along with a boatload of power, the KAC-7201 amp gives you the flexibility to handle just about any job, with high- and low-pass crossovers to route the appropriate frequencies to your speakers. If you're packing a subwoofer in the trunk, you'll want to take advantage of the KAC-7201's bridged mode for a whopping 460 watts of MOSFET-fueled power.
When you're in the mood to really crank up the volume, you've got to have plenty of wattage behind your speakers. Kenwood's got you covered with their KAC series amplifiers!

Along with a boatload of power, the KAC-7201 amp gives you the flexibility to handle just about any job, with high- and low-pass crossovers to route the appropriate frequencies to your speakers. If you're packing a subwoofer in the trunk, you'll want to take advantage of the KAC-7201's bridged mode for a whopping 460 watts of MOSFET-fueled power.

Switch on the selectable bass boost and let 'er rip — the built-in cooling fan helps keep the temperature down, even when the volume's up.

READ LESS

Product Highlights:

  • 150 watts RMS x 2 at 4 ohms
  • 230 watts x 2 at 2 ohms
  • 460 watts RMS x 1 bridged output at 4 ohms
  • stereo or bridged mono output
  • 4-ohm stable in bridged mode
  • Tri-way capable (Tri-Way crossover required)
  • MOSFET power supply
  • requires 4-gauge power and ground leads — wiring and hardware not included with amplifier
  • variable low-pass crossover (50-200 Hz at 18 dB per octave)
  • selectable high-pass crossover (150 Hz at 12 dB per octave)
  • selectable bass boost (12 dB at 90 Hz)
  • preamp- and speaker-level inputs
  • preamp outputs
  • cooling fan
  • 13-5/8"W x 2-5/16"H x 11-1/4"D
  • 1-year warranty
  • MFR # KAC-7201

What's in the box:

  • 2-Channel amplifier with two 30-amp blade fuses inserted into the chassis
  • One 7" speaker-level input harness
  • 1 Rubber terminal cover
  • 4 Self-tapping screws
  • Instruction Manual (English/French/Spanish)
  • Warranty Card

Customer reviews for Kenwood KAC-7201

Loading reviews...

Average review:

5.0 out of 5 stars
11 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Kenwood KAC-7201

Mark G.

Product Research

Features
Inputs and Outputs Notes

Features

Ground Isolation Circuit: This circuit cancels noise from the input of the negative side of the RCA cable, preventing vehicle electrical noise from interfering with the music.

Quiet Turn-on: This feature allows the amplifier to power up over a period of several milliseconds instead of instantaneously, protecting your speakers from thumps and other sounds that could be damaging.

Internal Crossover: The internal crossover can be set for full-range, low-pass or high-pass operation. The low-pass frequency is adjustable from 50-200 Hz with an 18 dB/octave slope. The high-pass frequency is fixed at 150 Hz with a 12 dB/octave slope.

Bass Boost: The bass boost gives you a 12 dB gain in bass output, centered at 90Hz.

Preamp Outputs: The preamp output jacks provide a convenient source for daisy-chaining an additional amplifier without running an extra set of RCA cables from the front of the vehicle to the amplifier location.

Protection Circuitry: To keep the amplifier safely operating, the protection circuitry is triggered in the following situations:

  • When a speaker wire may be short-circuited
  • When a speaker output contacts ground
  • When the unit malfunctions and a DC signal is sent to the speaker output
  • When the internal temperature is too high for the unit to operate
  • When the head unit, or this unit, is not properly grounded

Inputs and Outputs Notes

Right Side of Amplifier:

  • Battery and Ground Connections: gold-plated screw terminals; each terminal is 0.561" wide
  • Remote Turn-on Connection: gold-plated screw terminal that is 0.345" wide
  • Speakers Outputs: gold-plated screw terminals; each terminal is 0.345" wide

Loading accessories...

Customer Q&A

Loading articles...

Compare the sound