About the Kenwood KFC-W2541

Great sound, great price
Great sound, great price
No matter what you listen to, a good subwoofer will bring out the best in your music. Kenwood's advanced design and materials have given their subs a well-deserved reputation for high-quality sound and cutting-edge technology. Now their KFC-W2541 10" subwoofer brings you great bass at a price that'll bring you a big smile.
Advanced design concept
The KFC-W2541 sub features a two-piece polypropylene cone with Kenwood's X-Motif design and patterned surface for added rigidity, so you'll get maximum performance with minimal distortion. The sub handles up to 300 watts RMS, with plenty of low-end punch to bring your music to life. This speaker works in enclosures as small as 0.65 cubic feet, and can be installed in either sealed or ported boxes. The CA-101G steel-mesh grille (sold separately) protects the sub from the daily grind. For great sound at a great price, the KFC-W2541 gives you the best of both worlds.
Product highlights:
- 10" 4-ohm component subwoofer
- polypropylene cone with X-Motif design and foam surround
- power handling: 300 watts RMS (1300 watts peak)
- frequency response: 33-300 Hz
- top-mount depth: 4-7/8"
- sealed box volume: 0.65 cubic feet
- ported box volume: 0.9 cubic feet
- grille sold separately
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # KFC-W2541
What's in the box:
Kenwood KFC-W2541 owner's manual
- One 10" Subwoofer
- Trim ring
- Connection guide
- Warranty information
- Template on box lid
- Specs printed on the box
Reviews
Customer reviews
Loading reviews...
Kenwood KFC-W2541 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood KFC-W2541

Features & specs
Size | 10 -inch | |
Impedance (Ohms) | 4 | |
Cone Material | Polypropylene over Paper | |
Surround Material | Urethane | |
Ideal Sealed Box Volume (cubic feet) | 0.65 | |
Ideal Ported Box Volume (cubic feet) | 0.9 | |
Port diameter (inches) | N/A | |
Port length (inches) | N/A | |
Free-Air | No | |
Dual Voice Coil | No | |
Sensitivity |
84 dB at 1 watt | |
Frequency Response | 33 - 300 Hz | |
Max RMS Power Handling | 300 | |
Peak Power Handling (Watts) | 1300 | |
Top Mount Depth (inches) | 4 15/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 8 7/8 | |
Vas (liters) | 31.9 | |
Fs (Hz) | 33.7 | |
Qts | 0.513 | |
Xmax (millimeters) | 5.9 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Sealed Enclosure Applications: Kenwood recommends a sealed enclosure volume of 0.65 ft³ (0.4 ft³ to 1.2 ft³ acceptable). Sealed enclosures provide the most control over a woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable for all types of music.
Ported Enclosure Applications: Kenwood recommends a ported enclosure volume of 0.9 ft³ (0.7 ft³ to 1.2 ft³ acceptable) with a 10¾" wide x 1⅛" tall x 25½" long slot port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, so they are suitable for use with smaller amplifiers, giving you more bass output from a given amount of power. However, this efficiency comes at the expense of very low frequency output.
Spring Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10-gauge.
Additional Measurements: When mounted without the trim ring, the sub has these measurements:
- Mounting Height: 0.478"
- Flange Height: 0.2"
- Frame Diameter: 10.564"
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
When it comes to making your music sound great kenwoods the best and has been my whole life.whether it's a radio or speakers or a sound system kenwood is primo..and this product is another one its a great quality speaker for a good price.im very satisfied with the smooth bass it produces.
Robyn from Pasadena,tx