About the Kenwood Excelon XM65F

Bring bold sound to your ride
Bring bold sound to your ride
Experience classic Kenwood Excelon sound as you roar down the highway on your Harley Davidson. These XM65F 6-1/2" speakers are designed and engineered to mount and connect seamlessly in 2014-up Touring Models with 2-ohm stable systems. Add these to your ride and enjoy powerful audio that beats out wind, road, and engine noise.

Flaunt the Excelon badge with these included grilles
Excelon quality
Kenwood uses a tough injection-molded polypropylene cone for resonant lows and a PEI dome tweeter for surprising detail that you'll hear clearly even when you're hitting the throttle. These speakers are designed specifically for the fairing installation in select Harley Davidson models.
Product highlights:
- 6-1/2" full-range motorcycle speakers
- designed for select Harley-Davidson motorcycles
- injection-molded polypropylene cone
- 1" PEI dome tweeter
- power handling up to 150 watts RMS (300 watts peak)
- frequency response: 40-25,000 Hz
- sensitivity: 92 dB
- 2-ohm impedance
- grilles included
- top-mount depth: 2.25"
- warranty: 2 years
- MFR # XM65F
What's in the box:
Kenwood Excelon XM65F owner's manual
- Two 6.5" 2-way speakers
- 2 Gilles
- Instruction manual
Customer reviews for Kenwood Excelon XM65F
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Kenwood Excelon XM65F

Features & specs
General | ||
---|---|---|
Speaker Size | Vehicle-specific | |
Design | 2-way | |
Tweeter Design | Dome | |
Impedance (Ohms) | 2 | |
Tweeter Composition | PEI | |
Woofer Composition | IMPP | |
Woofer Surround | Rubber | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 92 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 40 - 25k Hz | |
Minimum RMS Wattage | --- | |
Maximum RMS Wattage | 150 | |
Peak Power Handling (Watts) | 300 | |
Top-mount Depth (Inches) | 2 5/16 | |
Bottom-mount Depth (Inches) | 2 5/8 | |
Cutout Diameter or Length (inches) | 5 5/8 | |
Mounting Height (Inches) | 0.705 |
Product Research
Features
Harley Davidson Integration: The Kenwood XM65F motorsports 6-1/2" speakers are designed for installation into select 2014-up Harley-Davidson Street Glide/Street Glide Ultra, Road Glide/Road Glide Ultra, and CVO Ultra motorcycles. The XM65F speakers mount into the factory front location using the factory mounting hardware and wiring. Replacement speaker grilles are provided.
Construction: The XM65F speakers feature a 6-1/2" IMPP (Injection Molded Polypropylene) woofer cone and a coaxially-mounted 1" PEI (Poly-Ether-Imide) dome tweeter.
Compatibility: The Kenwood XM65F speakers are designed to replace the factory front speakers in the following Harley-Davidson bikes:
Make | Model | Year | Chassis |
---|---|---|---|
Harley-Davidson | Street Glide | 2014-up | FLHX (with radio only or with amp installed) |
Limited Ultra | 2014-up | FLHTK (with radio only or with amp installed) | |
Ultra | 2014-up | CVO (with factory Stage 1 amp installed) | |
Road Glide | 2015-up | FLTR (with radio only or amp installed) | |
Limited Road Glide Ultra | 2020-up | FLTRK (with radio only or amp installed) | |
Road Glide Ultra | 2016-up | FLTRU (with radio only or amp installed) |
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Much better speakers than original installation in the front fairing took a little while but worth it
William from Bailey, CO