Metra 70-5514 Receiver Wiring Harness Connect a new car stereo in select 1988-97 Ford, Lincoln, Mazda, Mercury, and Nissan vehicles

Metra 70-5514 Receiver Wiring Harness

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system.

First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on three ways to connect the wiring harness here.

Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness makes installing your new stereo easier, and allows you to put the factory radio back when you sell your vehicle or return it at the end of the lease. We'll send a detailed instruction sheet with your order confirmation email. Warranty: 60 days.

Please read this important note: This harness may not contain provisions for every wire needed to complete your installation, and it will not accommodate special navigation, video, or factory steering wheel control connections (see Details for a list of connections). You will need a special adapter if you want your factory steering wheel audio controls to work with your new stereo.

Note: This includes a "jumper" bypass harness that will route your signal around your factory amplifier. You will need to access your factory amp in order to make the bypass harness connections.