Features

Crutchfield Wiring Harness: Crutchfield wiring harnesses prevent you from having to cut your vehicle's factory radio plug when replacing your factory radio with an aftermarket head unit. Simply solder or crimp the Crutchfield wiring harness to your aftermarket head unit's harness (solder & crimps not included), plug the aftermarket head unit's plug into the rear chassis of the aftermarket head unit, and plug the Crutchfield wiring harness into your vehicle's factory radio plug.

Wiring Notes: If the Crutchfield wiring harness is not equipped with a ground wire, you will need to ground the aftermarket head unit's ground wire to the metal chassis of your vehicle. Some vehicle's may require you to bypass the vehicle's factory amplifier (in another location from factory radio) or hardwire certain connections. If your vehicle is equipped with factory steering wheel controls, an additional adapter is required & sold separately.

Wire Code Chart:

Factory Amp Note: This harness includes RCA connections (instead of speaker wire leads) to connect the aftermarket head unit's preamp outputs to your vehicle's factory amp. Your aftermarket head unit must be equipped with front & rear preamp outputs.

Ground Wire Note: The ground wire found in the wiring harness is only for select vehicles only. Confirm that your vehicle's wiring harness has a corresponding ground wire. If no wire is present, connect the ground wire of your aftermarket head unit to the vehicle's metal chassis.

The Crutchfield Car Selector: Please visit the Crutchfield Car Selector for your specific type of vehicle.