Chat
Contact us
Close contact box
Connect ID #
099 699 138 4
Connect ID #
099 699 138 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Metra 70-8114 Steering Wheel Control Harness Install the Axxess ASWC-1 steering wheel control adapter in select 2003-15 Toyota vehicles without splicing (requires item #120ASWC1, sold separately)

Item # 120708114

Metra's 70-8114 harness allows you to connect the steering wheel audio controls in 2003-15 Toyota-built...

Find what Fits your vehicle

Remove

Checking fit...

Metra's 70-8114 harness allows you to connect the steering wheel audio controls in 2003-15 Toyota-built...

California customers:
Please click here for your Proposition 65 warning.

11 questions - 15 answers

Item # 120708114

In stock
$14.99

About the Metra 70-8114 Steering Wheel Control Harness

John Pollard

Metra 70-8114 Steering Wheel Control Harness

Metra's 70-8114 harness allows you to connect the steering wheel audio controls in 2003-15 Toyota-built vehicles (if equipped) to a new car stereo without having to splice into your factory wiring.

Metra 70-8114 Steering Wheel Control Harness

Metra's 70-8114 harness allows you to connect the steering wheel audio controls in 2003-15 Toyota-built vehicles (if equipped) to a new car stereo without having to splice into your factory wiring.

To use this harness, you'll need the Axxess ASWC-1 steering wheel control interface (sold separately) and a compatible aftermarket radio (won't work with Parrot, Rosen, or Car Show radios). You'll also need a vehicle-specific wiring harness to install your aftermarket stereo. We'll show you the correct harness when you enter your vehicle information into our online vehicle selector.

Once you've connected this harness to your new receiver's rear RCA auxiliary input, you'll also be able to use the handy auxiliary input in your Toyota. This adapter will work with any 2003-up Toyota, Lexus, and Scion vehicle equipped with steering wheel audio controls. Warranty: 1 year.

Important note: The aftermarket radio you install must have a rear RCA auxiliary input if you wish to retain your factory auxiliary input.

READ LESS

What's in the box:

MFR #70-8114

Customer reviews for Metra 70-8114 Steering Wheel Control Harness

Loading reviews...

Average review:

4.5 out of 5 stars
160 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Metra 70-8114 Steering Wheel Control Harness

Stacey B.

Product Research

Features

SWC Add-on Harness for Toyota/Lexus/Scion: When installing an aftermarket radio in  your 2003-up Toyota, Lexus, or Scion vehicle, the Metra 70-8114 harness allows you to retain your factory installed steering wheel controls without having to splice into your vehicle's factory wiring (120ASWC1, required & sold separately). In addition, the 70-8114 harness includes stereo male RCA connectors to allow you to retain your factory installed 3.5mm jack (your aftermarket radio must also have a rear-panel stereo Aux input).

Note: This is an optional harness; a main power and speaker harness is still required and sold separately.

Wire Code Chart:

Wire Color Function
Red +12 Volt Accessory
Black Chassis Ground
3.5mm Jack (male) SWC output
White RCA (male) Aux input (left)
Red RCA (male) Aux input (right)

 

Loading accessories...

Customer Q&A

11 questions already asked

Q
The pins on the connectors don't line up in my 2006 Tundra Double Cab. Anyone else have this issue?
tim  Apr 21, 2021
2 answers
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.
kristina  May 06, 2021 (Staff)
A
Sorry to hear, mine lined up beautifully and is functioning great. Double Check the specs.
angel  Apr 21, 2021
Q
Will this work for my 2012 Toyota Tundra, and do I need the adapter? I already have the aftermarket stereo installed and the harness
teddybear99398  Mar 07, 2021
1 answer
A
This harness does work in 2012 Tundra pickups, but is not always needed. I recommend contacting an advisor by calling 1-800-324-9695 to discuss the specifics on your Tundra as well as the radio and wiring harness you have now to check if this as well as other parts help with the installation of it.
jason  Mar 22, 2021 (Staff)
Q
Can you use this along with a crutchfield harness for aftermarket head units? Instructions for both this harness and the stereo harness say to connect to the factory (20 pin) connector in the car - but how can you clip two harnesses into a single factory connector (without having to splice wires, as advertised)??
jonathan w  Nov 30, 2018
1 answer
A
The Metra 70-8113 wire harness connects to the original factory connector (the one that disconnects from the original stereo chassis) in compatible vehicles and provides the leads for connection to an aftermarket stereo's harness (packaged with the aftermarket stereo). This harness also provides RCA connections for attaching to the aftermarket stereo's pre-amp outputs to the factory amplifier in compatible vehicles. For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx
ryan  Dec 05, 2018 (Staff)
Q
I have a 2005 Toyota prius and in order to get the temperature control screen I would need to put a resistor. Will this eliminate the need for the resistor?
julian  Feb 15, 2018
1 answer
A
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss specifics with your vehicle's factory system. They can cover all your questions in greater detail to ensure you have the right part(s) for your installation.
david  Feb 20, 2018 (Staff)
Q
What are the aux wires on this for? Do they need to be used? Have a double din bluetooth head unit with aux outs, but no amplifier. Are the aux plugs unnecessary ?
cyrita  Jan 01, 2018
1 answer
A
The 3.5mm (male) connection in the Metra 70-8114 harness is the steering wheel control output--it would plug directly into your aftermarket receiver's 3.5mm (female) steering wheel control input. For more details or to discuss further, please contact an Advisor directly by phone (888.955.6000) or online chat. Thank you! :)
david  Jan 09, 2018 (Staff)
Q
Can this be used without the Axxess ASWC-1 and how would you go about doing so? Please don't just say no so I spend more money and buy it as I just don't have $70 to spend. I have an aftermarket Sony DSX-A400BT, Toyota Camry 2005. Do you need to know the Wiring harness I used to put it in? Should be irrelevant?
conor  Sep 11, 2017
1 answer
A
The Metra 70-8114 harness cannot be used without the Axxess ASWC-1 steering wheel control adapter. It's designed to simplify the installation of the Axxess ASWC-1 adapter in select 2003-up Toyota vehicles, including the '05 Camry. For more details or to discuss further, please feel free to contact an Advisor directly by phone (888.955.6000) or online chat.
david  Sep 12, 2017 (Staff)
Q
What size of wire is it? I want to know what size posi-taps to get.
nick  Jan 20, 2017
1 answer
A
Thanks for your question. Looking at both harnesses you should be covered to get something in the 14 to 18 gauge range. Hope this helps.
kenneth  Jan 20, 2017 (Staff)
Q
I have 11 Venza. It shows that 'Does not fit' though. Do you have any recommendation?
john  Jan 18, 2017
1 answer
A
The ability to retain steering wheel controls with aftermarket receivers will be determined by the receiver you are using and the vehicle you have. For full information on this type of integration (including the parts you will need) please contact an Advisor by phone (1-800-324-9695) or online chat.
kenneth  Jan 20, 2017 (Staff)
Q
My 2003 4runner has the factory JBL sound system. Will this work for my vehicle?
c  Jun 12, 2016
1 answer
A
The ability to retain steering wheel controls with aftermarket receivers will be determined by the receiver you are using and the vehicle you have. For full information on this type of integration (including the parts you will need) please contact an Advisor by phone (1-800-324-9695) or online chat.
kenneth  Jun 13, 2016 (Staff)
Q
I have a 2011 Camry LE. I installed a Pioneer avh-280BT and do not have any steering controls plugged in to work. Will this harness work with this deck?
joe  Apr 14, 2016
1 answer
A
The ability to retain steering wheel controls with aftermarket receivers will be determined by the receiver you are using and the vehicle you have. For full information on this type of integration (including the parts you will need) please contact an Advisor by phone (1-800-324-9695) or online chat.
kenneth  Apr 14, 2016 (Staff)
Q
Will this work with the Pac Swi? Pioneer to Toyota Tacoma 2006
terry  Apr 08, 2015
4 answers
A
yes
elias  Apr 10, 2015
A
It works perfectly on my FJ CRUISER with Avic Z140
raul  Apr 09, 2015
A
Didn't seem to work on my wife's 2008 Scion
jim  Apr 09, 2015
A
I Am currently using it with a pioneer on a 06 Camry . so I think it will work just fine, and if not they will let you return it hassle free.
jorge  Apr 09, 2015
SHOW MORESHOW LESS

Loading articles...

Compare the sound