Metra 95-7340B Dash Kit
John from Oakland, TN on 11/21/2024
2013 Kia Sorento
0 of 0 found this helpful
Great look but needs improvements
Curtis from Battle Ground on 12/23/2023
2013 Kia Sorento
Installed on my Alpine Stereo. It fits easily around the unit when assembled and looks great when installed into the dash. However, the screws holding the kit to the unit are TOO SHORT, they need to be longer. Due to this, it feels that you're tightening the screws, the plastic is being squeezed by the head of the screw and may break the plastic due to the plastic thickness. I'm not sure what type of plastic is used for strength, i.e. PLA, PETG or ABS, but it does make a difference for durability purposes. Consequently, one day after install, the stereo was loose. Upon inspection I discovered that the left side of the plastic arm holding the stereo crumbled (literally). I know manufactures want to keep their price point down, but it shouldn't be at the cost of reliability/durability. The Crutchfield staff stood behind this product and were kind enough to send me another kit.
Pros: Looks good in Dash
Cons: Screws are too short, Plastic side supports are weak.
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Crutchfield customer from CASPER, WY on 10/28/2023
2013 Kia Sorento
Made install in 2013 Kia Sorento super simple
Pros: Simple and fast installation
Cons:
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Thomas from Milwaukee, WI on 7/7/2023
2011 Kia Sorento
The dash kit bezel was a perfect fit and looked great. Only reason it doesn't get 5 stars was I had to splice in to on of the factory harnesses for the steering wheel control module with this install kit. It should be a completely clean install with no cut wires on the vehicle side. That wasn't the case. That was disappointing. But overall it was easy to install and looked clean and professional when complete.
Pros: Good fit, clean look, easy install.
Cons: Still had to manually splice into the factory harness to retain steering wheel controls. That's why I paid the extra for the steering wheel control kit, so I wouldn't have to do that.
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Anthony Phil from Raleigh, NC on 1/16/2023
2011 Kia Sorento
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Russell from Beaufort, NC on 11/29/2022
This will make my radio conversion in my KIA look as good a as factory install.
Pros:
Cons:
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Erick from Bellingham, WA on 10/22/2022
2011 Kia Sorento
0 of 0 found this helpful
Works with kia serento setup double DIN
Danny from Pikeville, KY on 8/1/2022
2011 Kia Sorento
Works well for setup to use with double DIN.
Pros: Easy to setup and screw into place. Used 2-3 per side.
Cons: Screws that came with head unit should have been at least 1/8th" longer to use. Sides are plastic. Head unit came with a metal cage to use. But no holes to hold it. Had wire from past projects to make a ground wire for head unit to ground to vehicle ground wires to hold unit in place.
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Uerial from Laurel, MD on 2/20/2022
2013 Kia Sorento
0 of 0 found this helpful
The Best!
Crutchfield customer from South Whitley, IN on 12/4/2021
2011 Kia Sorento
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Crutchfield customer from Caguas, PR on 11/21/2021
2012 Kia Sorento
0 of 0 found this helpful
Preplan Install
Crutchfield customer from Conroe, TX on 6/1/2021
2012 Kia Sorento
Fits well, however make sure your new head unit doesnt have any controls on the bottom
Pros: Perfect fit
Cons: 10" screen makes for difficult install
0 of 0 found this helpful
Metra 95-7340B Dash Kit
Crutchfield customer from Tamiment, PA on 4/26/2021
2013 Kia Sorento
Not a bad dash kit. Goes together really easy. The holes on the sides for HU mounting don't line up perfectly so it takes a little finesse. Choose your HU supplied mounting screws carefully. Some might be a little short.
Pros:
Cons:
0 of 0 found this helpful
Didn't Fit
Ron from Naples, Fla on 4/21/2011
2011 Kia Sorento
Tried to use this kit to install a Pioneer 4200. Could not fit the kit around the unit, finally it broke. Also tried to fit around a Jensen vm9022, that also would not work.
Pros:
Cons:
3 of 3 found this helpful
