Customer Reviews

Metra 99-5025 Dash Kit

It turned out well enough. I have no issue with drilling a few holes that will be covered anyway. My only gripes are that #1 it could've mentioned what size drill bit to use. 7/64 is what I used, but a slightly larger 1/8 would likely work fine. #2 they could have noted that the metal sleeve needs to be removed from the radio beforehand. I spent way too much time trying to get the brackets to fit before realizing the sleeve was even there-much less needed to come off. These are small, but important points that they could easily have amended in the last 30 years, but alas. In the end, it worked out and looked well. I don't notice any terrible gaps or anything.

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Fit is very good, but I think they could figure out a way to do this without having to drill holes in the dash. I took the back sliding mount from the original radio and added it to the new radio which provided great stability. Then instead of using the screws, I used medium duty two-sided mounting tape to secure the radio and the trim. Seems to be working fine.

Have questions for
?

Crutchfield response on

Didn't need these parts

'91 Mustang single din. TAKE YOUR TIME - you won't need the adapter kit AND WON'T NEED TO DRILL HOLES if you gently file the sides of the little wallet compartment and swap the rear support from your existing unit. Get the wiring adapter(s).

Have questions for
?

Crutchfield response on

Not made well

Junk. It's a good thing this came free with my Alpine radio because the install kit isn't even wide enough for my radio to fit between the housing and above the pocket. Luckily the really old install kit already in my fox body worked great with the new radio.

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Great for installation on the 79-93 ford mustangs and fits great clean looking.

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Made the Installation so much easier!

Have questions for
?

Crutchfield response on

Nice!

1990 Mustang GT Convertible (Orig Owner) Installed 04/27-22 - Perfect fit with my KDC BT378U Kenwood head unit. Easy install just as advertised. I've seen some complaints about drilling holes and a vertical gap. Yes you do have to drill holes but it only matters if you plan to reinstall your OEM unit (which I don't) and there's a work around offered. There is a gap but only amounts to about 1/4" total and I managed to vertically center the unit leaving only about 1/8" top and bottom which isn't even noticeable to my eye.

Have questions for
?

Crutchfield response on

You need this

Easy install

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Perfect fit....easy to install...

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Perfect fit in my double din opening. Storage tray is nice. Easy to assemble and attach to radio.

Have questions for
?

Crutchfield response on

Great install kit!!

Dash kit fit perfect in my 91 foxbody, lower pocket is deeper than original, so it can actually be used.

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Exactly as described

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Very sharp looking and fits perfectly.

Have questions for
?

Crutchfield response on

Good Product

Car: 1988 Mustang GT Review: The Dash kit is of decent quality and works well. it provides good fitment and finish. The only issue I have is that the plastic storage bin has a very smooth surface, so items in the bin tend to slide around or fall out under cornering/acceleration. This can probably be resolved by adding a piece of sticky back foam (big box craft section) or tool drawer liner.

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Ease of installation

Have questions for
?

Crutchfield response on

Install Kit Doesn't work with my Sony CDX-GT320

This is not about a star rating, as the install kit doesn't work with my Sony radio, so I can't give it a star rating. The CD holder box is shorter than my radio and the side supports cant' be installed properly. Also, my Sony doesn't have attachment holes on the sides to install the support brackets. This kit won't work with my radio.

Have questions for
?

Crutchfield response on 5/4/2020

Once we saw this review, our Tech Support specialist, AJ, reached out to this customer to help him further. We'll either help him get the kit installed correctly, or help him return it for an exchange or refund.

Metra 99-5025 Dash Kit

Fit good looks good

Have questions for
?

Crutchfield response on

1987 Mustang GT radio install kit

Kit was awesome replacing stock radio with new JVC in my 1987 Mustang GT. Instructions were perfect. Everything worked first time!

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

The dash kit seems like it would be fine. After reading reviews that it deleted the cubby hole I went with a different one that looks like the factory cubby. The metra one does have a larger storage area but I went a different route

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Nothing damaged looks good

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Great prices and they give you everything you need. If you need help with installing just call them and they walk you through. Made several purchases with them through the years and always great.

Have questions for
?

Crutchfield response on

Perfect fit

Another excellent product.

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Perfect fit

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

Could not get this item to work, even had a friend who's an engineer take a look. Threw it in the trash.

Have questions for
?

Crutchfield response on 1/17/2018

Rhett, we're sorry you had problems with your kit. Whenever you encounter a problem with anything you purchase from Crutchfield, please contact our Tech Support team right away. They can help you solve the problem and get the kit installed correctly. Lifetime tech support comes with every Crutchfield purchase.

Metra 99-5025 Dash Kit

My Single DIN radio was too wide for the trim piece. It also required drilling into visible portions of the dash. I found another product that fixed both of these issue.

Have questions for
?

Crutchfield response on

perfect fit

Fit perfectly

Have questions for
?

Crutchfield response on

Dash kit

Fits and looks great!

Have questions for
?

Crutchfield response on

5 stars

Works fine.

Have questions for
?

Crutchfield response on

awesome dash kit

Fit right in no need for extra parts or modifying super easy

Have questions for
?

Crutchfield response on

MOUNTING KIT

Nice, But I would have preferred keeping my storage tray that was originally in the car...

Have questions for
?

Crutchfield response on

Could be better

Not bad, but would be nice if it could snap in instead of screws showing. The other thing instead of a blank plate on bottom if they gave an option for a compartment like my stock one did.

Have questions for
?

Crutchfield response on

Crutchfield purchase

Great customer service. Received my order in a matter of days. Crutchfield has a great website and it's user friendly.

Have questions for
?

Crutchfield response on

Forgot the coin pocket!

I cannot give this a good rating for 2 big reasons. It is a little shy of fitting the old gap. Meaning the gap from top of your heating controls to the bottom of your center console. Mine had about a 1/4" gap from fitting perfect. Maybe not a huge deal? But not putting the coin pocket under the stereo like the factory? Why would you want to lose space to put things like your phone? Not a good look without the coin picket!

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

The installation kit was very easy to use and fit well into my 1990 Mustang. The directions provided by Crutchfield were also very straight forward.

Have questions for
?

Crutchfield response on

It worked

The in-dash receiver kit wasn't what I was looking for but I had a heck of a time finding what I wanted so I settled! Go figure that a friend sent me a site and it had the one I wanted after I had already installed this one. Oh well, it worked. I gave up the cubby compartment under my after market stereo, but I guess that's a good thing so I don't keep clutter on my dash.

Have questions for
?

Crutchfield response on

Ford in-dash receiver kit

This was the easiest Receiver install I have ever done bar none..Looks great...Tight fit & I did not have to modify any part of the dash or bezel..Can't wait to try another install with your kit...

Have questions for
?

Crutchfield response on

Adapter

Perfect fit. installed in a 1993 Mustang GT

Have questions for
?

Crutchfield response on

Gets the job done

Fits my 1993 Mustang coupe good and secures the head unit just fine. I hate the screws showing and I don't like putting holes in my dash. But it is what it is. I would rather have a cubby than a eq slot also. Most radios have built in eqs now.

Have questions for
?

Crutchfield response on

In-dash Receiver Kit

The in-dash receiver kit made the final touch on the after market stereo installation. It made it look very nice and professional.

Have questions for
?

Crutchfield response on

Perfect fit

Remove the tabs, install the DIN tray, install the head unit, slap in car. Done! Perfect fit. Surprised it came out looking as nice as it did!

Have questions for
?

Crutchfield response on

Perfect fit

The only thing I didn't like is you loose the little cubby hole that is under the factory radio

Have questions for
?

Crutchfield response on

Kenwood

Perfect fit thanks

Have questions for
?

Crutchfield response on

Great fit!

Perfect fit, these guys know what they are doing!!!

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

installed on a 93 gt. Fits good, works good, and very secure feeling. My only down faults is it has 4 screws you have to put in. I might be picky but I don't like putting holes in my car. Plus if someone wanted to steal it all they would have to have is a screwdriver and everything would be gone 1min 2 at the most. I think they could improve on the security. It took me 20min to take out the factory.

Have questions for
?

Crutchfield response on

Metra 99-5025 Dash Kit

This product got the job done. It does not fit snuggly, which worked for my mustang since the old radio was torn out and the climate control panel was messed up. The plastic is thick enough so you shouldn't break it while installing it.

Have questions for
?

Crutchfield response on