Didn't do its intended job

Received it and had to pry it open. It's an identical design as another one I already have. Thought, "I'll get a new one so that it cuts better." Well, I couldn't trim the wire length with these. My old one was better. The quality control is definitely lacking here.

Have questions for
?

Crutchfield response on 4/4/2023

Once we saw this review, our Customer Support specialist, Rebecca, reached out to Jay to follow up. If you encounter a problem with anything you purchase from Crutchfield, it's important to contact our Customer Support or Tech Support teams right away. They can help you solve the problem or set up a return within 60 days of purchase.

Metra Crimp Tool Set

Awesome.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

was surprised when these got suggested but glad they did, as I realized i was about to install a radio and didn't own a crimp tool.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Very hard to use.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Bad in general but most anything at this price point is

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

It's just alright

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Works great

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

the wire crimper/cutter is no good, i can barely even open the one I got

Have questions for
?

Crutchfield response on 3/16/2021

Once we saw this review, our Customer Support specialist, Lilo, reached out to Skyler to follow-up. If you encounter a problem with anything you purchase from Crutchfield, it's important to contact our Customer Support or Tech Support teams right away. They can help you solve the problem or set up a return within 60 days of purchase.

Metra Crimp Tool Set

It works

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Almost decided not to purchase. That would have been a big mistake! Made the installation of the iDatastart remote start for my Acura TSX much easier.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Great quality tool.

Have questions for
?

Crutchfield response on

You pay for what you get

Very cheap tool. Maybe not for more then a few projects with it. They are harder to use then most of the other crimping tools I've used.

Have questions for
?

Crutchfield response on

Junk

Piece of junk. Would not strip wires. Ended up using pocket knife instead.

Have questions for
?

Crutchfield response on

Poor choice

Very dissapointed. Crimpers were extremely hard to open even after oiling them. Then the same day I got them the rubber handles started sliding off.

Have questions for
?

Crutchfield response on 6/4/2019

Derek, we're sorry you're disappointed with your crimp tool. Whenever you are not completely satisfied with anything you purchase from Crutchfield, please contact our Customer Support team at 1-800-955-9091. Purchases from Crutchfield can be returned or exchanged within 60 days of the purchase.

Metra Crimp Tool Set

Connectors worked good but the electrical plyers were complete garbage

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Good quality product

Have questions for
?

Crutchfield response on

No Bueno

The tool is too stiff because the paint/powder coating is too thick. I worked them back and forth for a couple minutes to be able to open them, but it is still too cumbersome. The wire stripping feature is difficult to use because there isn't really an edge to cut into the sheath. You more or less smash down as hard as you can and tear the sheathing off. I should have read the reviews.

Have questions for
?

Crutchfield response on 8/13/2018

Once we saw this review, our Customer Support team reached out to resolve the issue.

Too Stiff, Poor Construction.

Too stiff, poor construction. Wire stripping with this tool is very hard for small wires because the two sides of the tool do not fully come into contact with each other.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

The tool was too stiff. It made no difference after applying oil to the joints and opening and closing over 100 times. Poor construction.

Have questions for
?

Crutchfield response on

poor design and bad build

Almost impossible to open and close with one hand. Very stiff . Wire cutter location defeats the advantage of leverage. I used it with 12 gauge speaker wire and no way could it cut the wire. My kitchen shears were far more useful. Strips wire well if you can get i to close using two hand and hold the wire in the right little slot for the gauge at the same time. No way could my wife ever use these.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Today was my first time installing car speakers into my vehicle, to which this tool came in handy (along with the caps). The caps did their job well. The tool, however, slowed down the process a little. It was sharp but could have been sharper. It was a little difficult to open and close, I had to use my teeth a few times when my hands were semi full. The fact that was difficult to close open and close also made it tricky to line the wires up, resulting in having to do a very small amount of extra work due to severing a site by mistake (moved up a few centimeters and cut again). I went through extra caps because when the tool closed it would sometimes crack a few caps. Overall, the installation went well and this tool did help. It wasn't the worst but it wasn't necessarily THE best either.

Have questions for
?

Crutchfield response on

Crimp caps OK, crimp tool ??

I will give 5 stars on the crimp caps, they do what they are suppose to do. I gave 3 stars on the crimp tool because it is not sharp enough to cut the wires and insulation but after sharpening it worked fine. The insulation on the handle always comes off when I was pulling the insulation from the wires.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

I was able to cut wires from my Metra wiring harness and strip them using this tool. The stripping part wasn't super effective compared to my dad's old tool that he had in his tool box, but it did the job. In the future I'll buy a nicer tool that can perform more tasks once I do a bigger car audio install. This worked fine for my small project but if you are doing a lot of work you'll want something nicer.

Have questions for
?

Crutchfield response on

Hard to use

This tool is too hard to use, your hands will get a real work out. Had it not been for the crimps, I wouldn't advise to get this, unless you are really desperate for such a tool. Do yourself a favor and spend a little more and buy a better crimping tool.

Have questions for
?

Crutchfield response on

Low Quality

The wire stripping portion is useless. I bought it for the crimping ability and it did the job. If you're looking for wire strippers, or a long term solution, look elsewhere.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Always needed one and finally got one, works like a champ

Have questions for
?

Crutchfield response on

Good product

It worked great! It was also a great price.

Have questions for
?

Crutchfield response on

Good for simple jobs

It did pretty will for my simple install, I don't think this is the quality needed for more serious jobs or for the Audio Enthusiast that is constantly making changes/upgrades to their system. But for a regular guy like me that needed it for a one hour install and probably won't use it many more times, this works just pretty well and has a low price.

Have questions for
?

Crutchfield response on

Works sorta. Cheap.

I wish I had sucked it up and gone to a hardware store to spend money on a real pair of wire strippers. A bit more money but then at least I'd have a quality tool in my toolbox for a lifetime. These barely work. I ended up doing most of the wire stripping on my speaker install with a utility knife because it was easier than using these.

Have questions for
?

Crutchfield response on

Basic crimper

This crimper is very basic and can do the job if you are careful. The crimp caps have a very narrow metal band and it tends to slip when when you crimp down on it. I used 50% more caps than I had wires to crimp due to the smoothness of the crimper itself.

Have questions for
?

Crutchfield response on

Crimping Tool

Have several other tools similar but this one the most useful

Have questions for
?

Crutchfield response on

Average tool, crappy caps

The tool definitely got the job done, although maneuvering the thing was a tad difficult since it was so stiff. The crimp caps on the otherhand were flat out terrible (some caps were even missing the metal crimp piece in them!). Would recommend buying more reliable caps - you're essentially just paying for the tool here.

Have questions for
?

Crutchfield response on

It's alright

The tool was really stiff to use (I've got weak, lady wrists haha) but it did the job. Got it cause I needed the tool and didn't need to purchase 100 crimp caps. The caps were fine, to be honest I had never crimped before, but my new car stereo works so they do the job!

Have questions for
?

Crutchfield response on

ok

It got the job done but more effort than I expected. I mainly got this because I didn't need 100 crimp caps, which seems to be smallest number that can be bought outside of this combination product.

Have questions for
?

Crutchfield response on

Decent tool, get better caps elsewhere

I got this kit to replace the stereo in my truck. The tool is decent, but the caps that come in the kit are of poor quality. I recommend getting better quality caps.

Have questions for
?

Crutchfield response on

eh

its a ok tool, nothing premium about it.

Have questions for
?

Crutchfield response on

Great crimper, not quite so good wire stripper

Like others have said, it's a bit stiff to operate, but it's not a dealbreaker. The crimp tool worked just fine. The wire stripper functionality doesn't accommodate 20 gauge wires, so I had to get a separate wire stripper when installing my stereo. I bought this for the sake of having both tools in one, but it didn't work out. Be sure to check how big your wires are if you're planning on using this. If they're 18 gauge or larger, this would be a pretty good deal, especially as it also includes a set of crimp caps so you're really getting three products in one.

Have questions for
?

Crutchfield response on

A bit stiff, but does the trick

There's not too much to be said about this crimping/stripping tool. For the cost, it does the trick. But don't expect a premium, comfortable experience.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

This tool and crimp caps was perfect when it came to making sure the wire connections were secure and protected. I myself went the extra step of soldering the wires before using the caps for protection.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Wish I could return it with free shipping. Very stiff handle and didn't help me stripping the wires. Ended up using a scissor, just have to be so very gentle.

Have questions for
?

Crutchfield response on

For less than 10 bucks, it does the job.

For less than 10 bucks, this tool does the job, but probably only good for 1 or 2 more installs. The stripper starts to get a bit dull after doing one harness, and my hands were hurting a bit because the handles are so thin.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

I guess it gets the job done. However, the plastic handle cover on the left side came off. Also, it not easy to open and shut

Have questions for
?

Crutchfield response on

Crimp toolSet

Got the job done just fine, and did exactly what I needed it for. It is not the highest quality, which is predictable based on the price. The tool was a bit stiff opening and closing the jaws, but crimps appeared secure.

Have questions for
?

Crutchfield response on

Easy to use (esp. after WD-40)

As others have noted, opening and closing the tool requires a bit of force. I followed the suggestion others made and used a bit of WD-40 to the tool's rivets, which made it much easier to use. The yellow plastic on the handles isn't the best but I was fine with it since I'm not using this tool all the time.

Have questions for
?

Crutchfield response on

Keep your Crimp hand strong!

This tool does what it says. It has a wire stripper that works fine, and a crimper that crimps fine. This tool came with a set of 20 or so Crimp caps. Just enough for your basic install. All of the other reviews here are correct. The handles are very stiff, and you have to use both hands to pull them apart. I'm sure over time it will loosen up.

Have questions for
?

Crutchfield response on

You get what you pay for but does the job

It got the job done but like many other comments here, is a bit "sticky".

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

stiff to move

Have questions for
?

Crutchfield response on

Too tight

The crimper itself is either excessively painted (black) or is too tight, unmovable with one hand. You have to use both hands to practically pry the crimper open.

Have questions for
?

Crutchfield response on

Good product

Crimp Tool worded fine, but was very stiff.

Have questions for
?

Crutchfield response on

Works OK... not great

You get what you pay for with these. As others have stated they are a pain to open and close. Requires a lot of extra effort. That being said, once you get past that, they do the job fairly well. I've only used them for cutting and stripping insulation, and haven't had any issues doing either.

Have questions for
?

Crutchfield response on

Metra Crimp Tool set

Purchased these to install a stereo in my sons truck. The wire connectors that came with the tool worked very well and the crimp tool did not give any problems

Have questions for
?

Crutchfield response on

Very Cheap Tool

The crimp tool required some pulling and tugging both ways (to open and clamp). Pain in the buns when trying to put a radio in.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Can't open with one hand, need to use two hands to re-open after cutting, crimping etc. Only cost $ so not worth trying to return. You get what you pay for. My Crutchfield experience was good, I only blame them for selling low quality tools.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Its an okay crimping tool

Have questions for
?

Crutchfield response on

Crimping tool.

I never used a crimper and didn't realize how easy it was. I give a lot of credit to everyone at Crutchfield for walking me through the steps. I'm looking forward for future installs.

Have questions for
?

Crutchfield response on

Cheap made Crimp tool

This crimping tool is a waste of money, spend a few more dollars and get GOOD quality

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Useful tool but I ended up soldering the wires. Wasn't confident the crimps would stay in place.

Have questions for
?

Crutchfield response on

Does the job

Tool wasn't the greatest, but it does the job. You have to PULL it to the open position and use your man strength to clamp the connections.

Have questions for
?

Crutchfield response on

Works fine

Works fine.

Have questions for
?

Crutchfield response on

Reasonably priced, gets the job done

It takes the jacket off wires well, and crimps the crimp caps perfectly. My only complaint is that it is ultra stiff to use.

Have questions for
?

Crutchfield response on

Works ok

Replaced factory radio in 2001 Honda Accord with Pioneer DEH-6400BT and added USA-Spec BT35-HON and PA15-HON2 to factory radio of 2006 Honda Pilot (see my reviews). This tool is ok for price, used it wire stripping and crimping, and got the job done. Very stiff, I assume by design.

Have questions for
?

Crutchfield response on

Crimp Tool Set

Worked well for splicing wires together. Would've given 5 stars if tool was easier to use. It was tough to open and close. Joint probably needed some lubricant. Caps were perfect for the job!

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

I bought this set for my first headunit install. I spent about 20 minutes using this to connect my wires. The crimp tool was stiff, and took two hands to open for each crimp or cut. It was very hard to get a good crimp because the narrow handles really hurt my hands when I pressed down. I woke up the next morning with a bruise on my palm, and a sore hand. I think I will go to a local store and spend a little more on a tool with better handles. The crimp caps worked just fine, and I had plenty left over for any mistakes or future projects.

Have questions for
?

Crutchfield response on

Crimpers not that great

The little crimpers were good, but this tool was stiff and cheap. It took two hands to open it and was not that great to work.

Have questions for
?

Crutchfield response on

Metra Crimp Tool Set

Out of the box, this thing is tight...that's a good thing. loosens nicely with repeated use.

Have questions for
?

Crutchfield response on

Basic

its a cheap basic set, its made for like 2 or 3 uses. but it does the job and for the price you cant get much better

Have questions for
?

Crutchfield response on