About the XS Power D6500

Product highlights:
- 12-volt deep cycle car battery
- sealed absorbed glass mat (AGM) design
- reinforced ABS plastic case
- 1,070 cranking amps
- maximum output: 3,900 amps
- discharge capacity: 75 amp-hours
- fits BCI Group 65 vehicles
- 11-13/16"W x 6-13/16"H x 7-1/4"D (measure for fit)
- weight: 58.0 lbs.
- warranty: 3 years
- MFR # D6500
- Item # 122D6500
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
- D6500 AGM Deep cycle 12 volt battery
- 2 M6 bolts
- 2 Split lock washers
- D Series Instruction Sheet
More details on the XS Power D6500

Product Research
Features
Overview: The XS Power D6500 is a 12-volt battery that is designed to be used as a supplemental power source in your vehicle, or it can replace your vehicle's OEM battery. It can supply the power needed to run your high-powered audio system, better than a standard battery.
Terminals Needed: This D-series battery does not come with battery terminals, so you will need to purchase the proper terminal adapters for your application before installation can take place:
- Car Stereo Installation: You will need terminal adapters that fit the inner diameter of your power ring terminals. Recommended terminal adapters include: Two 5/16" brass stud adapters (#589), Two 3/8" brass stud adapters (#590), Two 5/16" + Two 3/8" brass stud adapters (#588), or Two 3/8" zinc-plated steel stud adapters (#587). For dual-battery installations, a second battery install kit, such as the XS Power AK3500, can be used to connect the D6500 in parallel (+ to + and - to -) with the main battery.
- OEM Battery Replacement: The D6500 fits the BCI Group 65 vehicle applications and will fit many small imported vehicle applications. If you are installing the battery under the hood or replacing your vehicle's OEM battery, you will need either the Short Brass Post Adapters (#580) or the Long Brass Post Adapters (#586) to connect your battery cables. The D6500 Billet Aluminum Hold Down (#585) can also be used to install the battery under the hood.
i-Bar: The integrated Battery Amperage Rail (i-Bar) system accessories can be used with this battery in special applications. These include the Marine i-Bar Top Only (#554) and i-Bar Multi Top Only (#556).
Absorbent Glass Mat (AGM): XS Power's AGM (Absorbent Glass Mat) batteries use a fibrous material to suspend the liquid electrolyte against the lead plates. Because the electrolyte is absorbed in the material, there is little chance of an acid leak, even in the event the case is ruptured. AGM batteries contain more lead compared to traditional "flooded" batteries, thus producing more power.
Charging the Battery: It is very important to properly charge an Absorbent Glass Mat (AGM) battery before using. Improper charging will permanently damage the battery (swelling, etc.), and will void the warranty. XS Power offers two 12-volt High Frequency IntelliChargers designed for charging AGM Batteries: the 8-amp HF1208 and the 15-amp HF1215 (both sold separately). The chargers have a microprocessor that monitors the charging process to avoid overcharging, and are strongly recommended for this battery.
Specifications: The D6500 has the following specifications:
- MAX Amps: 3900 amps
- Cranking Amps (at 32°F): 1100 amps
- Reserve Capacity: 174 minutes
- Discharge Capacity: 86 Ah (amp hours)
- Dimensions: Length=11.8", Height=6.8", Width=7.2"
- Weight: 54 pounds
Loading...
Loading accessories...
Customer Q&A
18 questions already asked
Loading...
Loading articles...
This battery is a perfect fit to replace the starting battery in my 2004 Jeep Grand Cherokee. It is providing consistent power for my 1100 Watt sound system. No more dimming headlights when the bass hits. It also holds a charge well for extended engine-off music. Great product.
A. Anderson from Allen, KS