About the Pioneer TS-ME770TSB
Thunderous sound and bright RGB lights
Thunderous sound and bright RGB lights
Pioneer's TS-ME770T marine tower speakers give you outstanding sound when you're out having fun on the water. Whether you're enjoying an afternoon of water skiing or cruising along to a favorite fishing spot, you'll be able to hear your music over the roar of the engine. When the sun goes down, you'll also enjoy built-in RGB LED lighting that adds style to any vessel.
Made for life on the water
These 7.7” speakers are built to deliver maximum performance and marine-tough durability. The super-stiff mica-reinforced polypropylene cones feature durable butyl rubber surrounds, while the 1-1/8" neodymium dome tweeters are mounted directly to the grilles for optimal sound.
Life on the water can be hard on electronics, but these speakers can stand up to just about anything. They're IPX7-rated for water resistance and built to withstand punishing sunlight that can weaken lesser speakers.
The grilles look terrific, of course, but they're also durable enough to survive in harsh marine environments.
Don't forget the clamps
Each of the injection-molded enclosures features a decorative logo cap on the end opposite the speaker, and is designed to mate with a Pioneer clamp system (sold separately).
- 7.7" 2-way marine wakeboard tower speakers (pair)
- built-in RGB lighting
- mica-reinforced IMPP woofer with butyl rubber surround
- 1-1/8" neodymium dome tweeter
- black with black Sport grilles
- IPX7 certified for marine use
- mounting clamps sold separately
- handles up to 100 watts RMS (250 watts peak power)
- frequency response: 42-23,000 Hz
- impedance: 4 ohms
- sensitivity: 90 dB
- warranty: 1 year
- MFR # TS-ME770TSB
What's in the box:
- Two 7.7" Marine tower speakers (black) w/ RGB lighting (attached 7" wiring harness)
- 2 End-caps
- 2 Double-sided adhesive pads
- Installation instructions (Eng/Span/Fren/Others)
- Warranty information (Eng & Fren)
Customer reviews for Pioneer TS-ME770TSB
Thanks for submitting your review
More details on the Pioneer TS-ME770TSB
Features & specs
|Woofer Composition||Mica-reinforced poly|
|Woofer Surround||Butyl rubber|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
90 dB at 1 watt |
|Max RMS Power Handling||100|
|Peak Power Handling (Watts)||250|
Marine-Tested: The TS-ME770TSB marine waketower speakers meet both IPX7 (water immersion) and ASTM D4329 (UV exposure) marine certifications.
Note: Mounting brackets & hardware are not included and must be purchased separately.
Woofers: Each 7.7" monocoque-designed woofer cone is made with mica-reinforced, injection-molded polypropylene (IMPP), along with a butyl rubber surround. This process of cone molding assures a uniform cone thickness for superior linearity and clarity. Additionally, the cones are lightweight and rigid for decreased distortion and superior bass response.
Tweeters: The 1.125" tweeters feature a lightweight polyimide (PI) diaphragm with a uniquely shaped wave guide that provides natural and clear sound with a wide dispersion. The tweeters are bridge mounted to the grilles, rather than to a pole piece, reducing the chance of water leaking through the woofer cone.
Enclosures: The TS-ME770TSB drivers are housed in sleek ABS enclosures that are sealed to provide exceptional water-resistance, helping protect the speaker components from water damage. The enclosures feature a shallow grille design that compliments any vessel interior.
Power: Each 4Ω waketower speaker can handle up to 100W RMS (250W peak).
RGB LEDs: The Pioneer marine waketower speakers feature built-in RGB LED lighting for multi-color illumination of the cones. Control over the LED lighting can be done using an optional RGB LED controller such as the MLC-RW or RF-RGB-MCV2 (both sold separately).
Mounting: The TS-ME770TSB marine speakers can be mounted to a wide range of waketower tubing, ranging from 1.875" (1-7/8") to 3.0" in diameter, using the UD-ME30CP mounting bracket kit (sold separately).
Wiring: A built-in 7" wire harness includes the following wires:
- Red (14 ga.): Speaker +
- Black (14 ga.): Speaker -
- Red (18 ga.): Red LED -
- Blue (18 ga.): Blue LED -
- Green (18 ga.): Green LED -
- Yellow (18 ga.): +12VDC for LEDs (1A fuse recommended, not included)