About the Pioneer TS-A2000LB

Product highlights:
- sealed enclosure with one 8" subwoofer
- 5/8" medium density fiberboard construction
- covered with black carpet
- steel mesh grille
- glass fiber/mica reinforced polypropylene cone with rubber surround
- impedance : 2 ohms
- power handling: 250 watts RMS (700 watts peak power)
- frequency response: 20-1400 Hz
- sensitivity: 84 dB
- dimensions: 13-3/4"W x 9-7/8"H x 5-1/8"D
- warranty: 1 year
- MFR # TS-A2000LB
- Item # 130TSA20LB
What's in the box:
Pioneer TS-A2000LB owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Pre-loaded 8" passive subwoofer enclosure
- 4 Threaded feet
- 2 Angle brackets
- 4 Adhesive feet cushions
- Eight 1" screws
- Installation instructions
- Warranty information
More details on the Pioneer TS-A2000LB

Features & specs
General | ||
---|---|---|
Woofer Size (inches) | 8 | |
Speakers Per Box | 1 | |
Woofer Material | Mica/glass fber | |
Enclosure Type | Sealed | |
Color | Black | |
Pieces in System | 1 | |
Width (inches) | 13-3/4 | |
Height (inches) | 9-7/8 | |
Depth (inches) | 5-1/8 | |
Connector Type | Binding post | |
Frequency Response | 20-1,400 Hz | |
Power Handling (Watts RMS) | 250 | |
Power Handling (Watts Peak) | 700 | |
Sensitivity | 84 dB | |
Impedance | 2 ohms | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Overview: The Pioneer TS-A2000LB is a sealed subwoofer enclosure, pre-loaded with a single 8" driver. Its passive design offers maximum flexibility in amplifier matching and in the wide variety of vehicles it can be used in.
A-Series: The TS-A2000LB is part of Pioneer's A-series speakers, purposely designed to match A-series full-range speakers, providing smooth and seamless sound characteristics with dynamic, high-impact bass.
Driver: The TS-A2000LB features a single 8" driver made with a glass fiber and mica interlaced, injection molded polypropylene (IMPP) cone with butyl rubber surround, mounted in a matched ported enclosure. Careful engineering of the entire motor structure and suspension system gives balanced and linear motion of the cone, both forward and reverse directions, maintaining a high level of linearity, even during high output/high excursion transients.
Enclosure: The TS-A2000LB features a compact, space-saving enclosure that's designed for optimal use of space. The carpeted enclosure is shallow enough for mounting in a variety of pickup trucks including standard- and extended-cab models. Its unique design and included mounting hardware allow it to be mounted upright or laying flat, facing up or down.
Mounting: Two metal angle-brackets and eight 1" screws are provided for mounting the enclosure to a trunk or rear compartment floor in an upright fashion. Four screw-on feet also allow the enclosure to be mounted flat under a seat, either facing up or in a down-firing configuration.
Terminals: Wire connection to the subwoofer enclosure is done through a pair of binding posts that can accommodate bare wire (up to 12AWG), banana plugs, or pin connectors.
Specifications:
- Driver Size: 8"
- Power Handling: 250 watts RMS / 700 watts peak
- Frequency Range: 20Hz - 1.4kHz
- Sensitivity: 84dB
- Nominal Impedance: 2Ω
The Pioneer TS-A2000LB replaces these items:
- 5/8" medium density fiberboard construction covered with black carpet
- 4-ohm impedance
- power handling: 150 watts nominal (600 watts peak power)
Loading...
Loading accessories...
Customer Q&A
6 questions already asked
Loading...
Loading articles...