About the Pioneer TS-A2000LD2

A shallow-mount sub that rocks
A shallow-mount sub that rocks
Pioneer's TS Series shallow-mount subs bring great bass to vehicles where conventional subs won't fit. Their low profile allows the use of slender enclosures that'll fit behind a truck seat or into any tight space while delivering the bass performance you need. The TS-A2000LD2 8" shallow-mount sub handles up to 250 watts RMS with a mounting depth of just 2-5/8".
Mica-injected molded resin cone
The TS-A2000LD2 features an oversized cone made of mica and glass-fiber reinforced polypropylene that moves more air and delivers accurate bass. The dual 2-ohm voice coils allow you to wire the sub for 1- or 4-ohm impedance. The sub works best in a small sealed enclosure, making it ideal for those tight spaces in today's smaller vehicles.
Product highlights:
- Featured in our article: Best shallow-mount car subwoofers for 2023
- 8" shallow subwoofer with dual 2-ohm voice coils
- glass fiber and mica reinforced polypropylene cone with rubber surround
- power handling: 250 watts RMS (700 watts peak)
- frequency response: 20-1400 Hz
- sensitivity: 83 dB
- mounting depth: 2-5/8"
- cutout diameter: 7"
- box volume: 0.15-0.5 cubic feet
- grille not included
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # TS-A2000LD2
What's in the box:
Pioneer TS-A2000LD2 owner's manual
- One 8" Pioneer shallow mount subwoofer
- Trim ring
- Six 1-1/8" Screws
- Adhesive backed foam gasket
- Manual (English/ German/ French/ Spanish/ Portuguese/ Italian/ Russian)
- Warranty information
- Enclosure recommendations printed on the box
Reviews
Customer reviews
Loading reviews...
Pioneer TS-A2000LD2 reviews
Average review:
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer TS-A2000LD2

Features & specs
Size | 8 -inch | |
Impedance (Ohms) | 1, 4 | |
Cone Material | Glass Fiber/Mica Reinforced IM | |
Surround Material | Rubber | |
Ideal Sealed Box Volume (cubic feet) | 0.5 | |
Ideal Ported Box Volume (cubic feet) | 0.5 | |
Port diameter (inches) | 3 | |
Port length (inches) | 8 | |
Free-Air | Yes | |
Dual Voice Coil | Yes | |
Sensitivity |
83 dB at 1 watt | |
Frequency Response | 20 - 1400 Hz | |
Max RMS Power Handling | 250 | |
Peak Power Handling (Watts) | 700 | |
Top Mount Depth (inches) | 2 11/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 6 15/16 | |
Vas (liters) | 4.11 | |
Fs (Hz) | 63 | |
Qts | 0.99 | |
Xmax (millimeters) | 2.3 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year |
Product Research
Features
Woofer Cone: Pioneer uses a glass fiber and mica reinforced injection molded polypropylene (IMPP) cone, making it more rigid than polypropylene alone.
Shallow Mount Woofer: Pioneer's Shallow-Mount subwoofers are designed to provide wider installation options for a broad range of vehicles. They can be mounted in select factory subwoofer locations, as well as behind or under the seats of many vehicles.
Dual 2Ω Voice Coils: This woofer features two 2Ω voice coils that offer wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1Ω load. When the voice coils are wired in series, the woofer presents a 4Ω load.
Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Sealed Box Volume: Pioneer recommends a sealed enclosure with an internal volume between 0.15 ft³ and 0.5 ft³, with an ideal volume of 0.5 ft³. Sealed enclosures provide the most control over the woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box Volume: The recommended ported box volume ranges from 0.25 ft³ to 0.5 ft³, with the ideal size being 0.5 ft³, using a single 3" diameter x 8" long port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, maximizing bass output for a given amplifier.
Measurements: When mounting the woofer with the trim ring, the dimensions change as follows:
- Mounting Height: 0.54"
- Flange Height: 0.54"
- Frame Diameter: 8.9"
Loading accessories...
Customer Q&A
15 questions already asked
Loading articles...
Installed in a 2005 Mustang in the lower door. It was not a perfect fit and sits a little off center, but still retained the factory speaker cover. It sounds amazing! I am definitely getting another for the passenger door!
Dustin from Paducah, Ky