About the Pioneer TS-A301S4
Rolling in the deep
Rolling in the deep
Pioneer's Champion Series subwoofers are made to give you the deep, powerful lows you expect from Pioneer. The TS-A301S4 12" subwoofer handles up to 500 watts RMS RMS and features an injection-molded polypropylene cone that's impregnated with glass fibers and mica for exceptional precision and strength. An elastic polymer/reinforced fiber surround supports the woofer during cone excursion to give you accurate, hard-hitting bass notes when the music's hot.
Dishing it out
This potent Pioneer sub will bring out all the power in your music by filling in the lowest frequencies of the sound spectrum. Its 4-ohm impedance makes it a great match for bridged amplifiers. When you're looking for great bass, the TS-A301S4 is ready to dish it out.
- 12" 4-ohm component subwoofer
- injection-molded polypropylene/glass fiber/mica cone
- elastic polymer/reinforced fiber surround
- power handling: 500 watts RMS (250 watts per coil)
- 1600 watts peak power handling
- frequency response: 20-1600 Hz
- sensitivity: 92 dB
- mounting depth: 6.22"
- sealed box volume: .085-1.75 cubic feet
- ported box volume: 1.25-2.0 cubic feet
- grille not included
- warranty: 1 year
- MFR # TS-A301S4
What's in the box:
- One 12" Subwoofer
- Eight 1-1/8" Screws
- Adhesive backed foam gasket
- Manual (English/ French/ Spanish/ Portuguese)
- Warranty information
Customer reviews for Pioneer TS-A301S4
Average review:5.0 out of 5 stars
Thanks for submitting your review
More details on the Pioneer TS-A301S4
Features & specs
|Features and Specs|
|Cone Material||IMPP Composite|
|Surround Material||Fiber/Elastic Polymer|
|Port diameter (inches)||3|
|Port length (inches)||6.5|
|Dual Voice Coil||No|
92 dB at 1 watt |
|Frequency Response||20 - 1600 Hz|
|Max RMS Power Handling||500|
|Peak Power Handling (Watts)||1600|
|Top Mount Depth (inches)||6 1/4|
|Bottom Mount Depth (inches)||N/A|
|Cutout Diameter or Length (inches)||11 1/8|
|Parts Warranty||1 Year|
|Labor Warranty||1 Year|
|Ideal Sealed Box Volume (cubic feet)||1.25|
|Minimum Sealed Box Volume (cubic feet)||0.85|
|Maximum Sealed Box Volume (cubic feet)||1.75|
|Ideal Ported Box Volume (cubic feet)||1.5|
|Minimum Ported Box Volume (cubic feet)||1.25|
|Maximum Ported Box Volume (cubic feet)||2|
Woofer Cone: Pioneer uses an IMPP (Injection Molded Polypropylene) woofer cone. This process of cone molding assures a uniform cone thickness for superior linearity and clarity.
Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Sealed Box Volume: Pioneer recommends a sealed enclosure with an internal volume between 0.85 ft³ and 1.75 ft³, with an ideal volume of 1.25 ft³. Sealed enclosures provide the most control over the woofer, will handle a lot of power, and provide accurate sonic reproduction, making them suitable to all types of music.
Ported Box Volume: The recommended ported box volume ranges from 1.25 ft³ to 2.0 ft³, with the ideal size being 1.5 ft³, using a single 3" diameter x 6½" long port. Ported (or vented) enclosures typically provide better overall efficiency than sealed, maximizing bass output for a given amplifier.
Free-Air: The woofer can also be mounted in free air to a baffle board (infinite baffle, no enclosure). When mounted in free air, the power handling is reduced by 75% (to 125 watts).
3 questions already asked