About the Pioneer TS-A879

Product highlights:
- 3-1/2" carbon and mica-reinforced injection-molded polypropylene midrange speakers
- 1" polyetherimide balanced dome tweeters
- inline crossovers
- handles up to 100 watts RMS (450 watts peak power)
- frequency response (using included inline crossover): 850-33,000 Hz
- sensitivity: 85 dB
- woofer top-mount depth: 1-1/2"
- grilles not included
- warranty: 1 year
- MFR # TS-A879
- Item # 130TSA879
What's in the box:
Pioneer TS-A879 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two 2-way speakers
- Two 10" lengths of speaker wire with in-line high pass crossover (female quick slides on one end and unterminated wire on the other)
- Warranty information
- Specs printed on box
Featured video:
More details on the Pioneer TS-A879

Features & specs
General | ||
---|---|---|
Speaker Size | 3 1/2 | |
Driver Design | 2-way | |
Woofer Design | Cone | |
Woofer Material | Carbon and Mica reinforced IMPP | |
Woofer Surround | Rubber | |
Midrange Design | --- | |
Midrange Material | --- | |
Tweeter Design | 1" Balanced Dome | |
Tweeter Material | Polyetherimide | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 4 | |
Weather-resistant | No | |
Grilles Included | No | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 85 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 52 - 33k Hz | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 450 | |
Top-mount Depth (Inches) | 1 1/2 | |
Bottom-mount Depth (Inches) | 1 5/8 | |
Cutout Diameter or Length (inches) | 3 1/16 | |
Mounting Height (Inches) | 0.312 | |
Frame Width | 3.42 | |
Frame Length | 3.42 |
Product Research
Features
Overview: Pioneer describes the TS-A879 as a wide range speaker (as opposed to a full range speaker), designed to replace the 3½" speaker used by several vehicle manufacturers. Please enter your vehicle information to confirm fit.
Crossovers: A 6 dB/octave, 850 Hz high-pass crossover is integrated in-line with each included 10" length of speaker wire. The output end of the wire has quick slides that plug onto the speaker terminals; the input end of the wire is not terminated. At the widest point the crossovers measure just under ¾" across.
Power: The 100 watt RMS power rating is valid only when using the included crossovers.
Frequency Response: The published frequency response is 52 Hz to 33 kHz (-20 dB), but the -3 dB point on the included high pass crossover is 850 Hz. (The included crossover should always be used, unless the speakers are actively filtered.)
Loading...
Loading accessories...
Customer Q&A
5 questions already asked
Loading...
Loading articles...
2018 Jeep Wrangler Rubicon front dash speakers Replaced factor speakers without adding an amplifier and they doing 1,000% better. After doing a lot of research found to be the best value
Richard from Wayland, MI