About the Pioneer TS-SW2002D2

A shallow-mount sub that rocks
A shallow-mount sub that rocks
Pioneer's TS Series shallow-mount subs bring great bass to vehicles where conventional subs won't fit. Their low profile allows the use of slender enclosures that'll fit behind a truck seat or any tight space while delivering the bass performance you need. The TS-SW2002D2 8" shallow-mount sub handles up to 150 watts RMS with a mounting depth of just 2-5/8".
Mica-injected molded resin cone
The TS-SW2002D2 features an oversized cone made of mica-injected molded resin that moves more air and delivers accurate bass. The dual 2-ohm voice coils allow you to wire the sub for 1- or 4-ohm impedance. The sub works best in a small sealed enclosure, making it ideal for those tight spaces in today's smaller vehicles. Pioneer recommends their UD-SW200D downfiring shallow subwoofer enclosure for use with this sub.
Need an amp for this sub? Check out this Crutchfield-approved bass package.
Product highlights:
- 8" shallow subwoofer with dual 2-ohm voice coils
- mica-injected resin cone
- handles up to 150 watts RMS (600 watts peak power)
- works in free-air applications
- frequency response: 20-200 Hz
- sensitivity: 86 dB
- mounting depth: 2-5/8"
- box volume: 0.5 cubic feet
- grille not included
- warranty: 1 year
- MFR # TS-SW2002D2
What's in the box:
Pioneer TS-SW2002D2 owner's manual
- One 8" Pioneer shallow mount subwoofer
- Six 1-1/8" Self-tapping screws
- Adhesive backed foam gasket
- Manual (English/ French/ Spanish/ Portuguese)
- Warranty information
Reviews (76)
Customer reviews for Pioneer TS-SW2002D2
Loading...
Loading reviews...
Average review:
4.5 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pioneer TS-SW2002D2

Features & specs
Features and Specs | ||
---|---|---|
Size | 8 -inch | |
Impedance (Ohms) | --- | |
Cone Material | Mica-injected IMPP | |
Surround Material | Elastic Polymer | |
Port diameter (inches) | 3 | |
Port length (inches) | 10 | |
Free-Air | Yes | |
Dual Voice Coil | Yes | |
Sensitivity |
86 dB at 1 watt | |
Frequency Response | 20 - 200 Hz | |
Max RMS Power Handling | 150 | |
Peak Power Handling (Watts) | 600 | |
Top Mount Depth (inches) | 2 11/16 | |
Bottom Mount Depth (inches) | N/A | |
Cutout Diameter or Length (inches) | 7 | |
Vas (liters) | 3.8 | |
Fs (Hz) | 65 | |
Qts | 0.98 | |
Xmax (millimeters) | 2.8 | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Box Requirements | ||
Ideal Sealed Box Volume (cubic feet) | 0.5 | |
Minimum Sealed Box Volume (cubic feet) | 0.15 | |
Maximum Sealed Box Volume (cubic feet) | 0.5 | |
Ideal Ported Box Volume (cubic feet) | 0.5 | |
Minimum Ported Box Volume (cubic feet) | 0.25 | |
Maximum Ported Box Volume (cubic feet) | 0.5 |
Product Research
Features
Shallow Mount Woofer: Pioneer's Shallow-Mount subwoofers are designed to provide installation options for a broad range of vehicles. They can be mounted behind or under the seats of many vehicles. The TS-SW2002D2 has a Mica reinforced IMPP (Injection Molded Polypropylene) composite cone. The process of bonding reinforced pulp to the back of the cone improves its damping capability and eliminates excess vibration.
Dual 2-ohm Voice Coils: This woofer features two 2-ohm voice coils that offer wiring flexibility. When the voice coils are wired in parallel, the woofer presents a 1-ohm load. When the voice coils are wired in series, the woofer presents a 4-ohm load.
Terminals: The spring post terminals will accept pin connectors, single banana plugs, or bare wire up to 10 gauge.
Sealed Box Volume: Sealed is the preferred enclosure type for theTS-SW2002D2. The sealed box sizes recommended by Pioneer range from 0.15 ft³ to 0.5 ft³; with 0.5 ft³ being the ideal size.
Vented Box Volume: The vented box sizes recommended by Pioneer range from 0.25ft³ to 0.5 ft³; within this range the ideal size is 0.5 ft³ with a single 3" diameter x 10" long port.
Bandpass Box Volume: The bandpass box sizes recommended by Pioneer range from 0.25 ft³ per chamber to 0.4 ft³ per chamber; within this range the ideal size is 0.4 ft³ per chamber. One 3" diameter x 6.5" long port should be used in an enclosure with 0.4 ft³ chambers.
Infinite-Baffle Operation: The woofer is also optimized for infinite-baffle operation (free-air) so that it can be installed in a variety of locations, including factory woofer applications, without the need for a dedicated enclosure.
The Pioneer TS-SW2002D2 replaces these items

Pioneer TS-SW841D
- shallow-mount design
- reinforced IMPP cone with woven fiber surround
- 50-120 watts RMS power range
Loading...
Loading accessories...
Customer Q&A
26 questions already asked
Loading...
Loading articles...
Sub sounds so much clearer than factory Alpine sub in my Wrangler. Only thing I need now is a new %channel amplifier to actually give it the power it needs!
Jordan from Kingsport, TN