Features

Vehicle Compatibility: The JL Audio SB-POL-RZG2SPKR/M3-650i Stealthbox Speaker Pods are designed specifically for the for the 2014-Up Polaris RZR 4 900, 900XC, XP 1000 & XP4 1000.

Stealthbox Speaker Pods: These custom-engineered Stealthbox speaker pods feature 100% fiberglass construction with a texture-coated, weatherproof finish and mount securely in each kick-panel, off the floor and out of harm's way. Each sealed Stealbox enclosure houses a high-performance, JL Audio M3 6.5" marine coaxial speaker and delivers clean, powerful sound.

6.5" Coaxial Speakers: Each Stealthbox Speaker Pod contains a single JL Audio M3-650X-Gm-i marine coaxial speakers with RGB LED illumination. Each coaxial speaker can handle 60 watts RMS and 225 watts Peak. Each speaker is rated at 4 ohms.

• Marine Tested: JL Audio's marine speakers are tested in ultraviolet chambers to simulate years of sun exposure, and salt fog chambers to simulate years of exposure to salt-water environments. The baskets and grilles are UV-resistant polymer. The baskets encapsulate the woofers' motor systems to prevent corrosion.
• Tweeter: Each speaker features a grille mounted ¾" treated silk dome tweeter with a specially formulated treatment to withstand the marine environment. The tweeters use neodymium magnets for higher efficiency levels and are Ferrofluid-cooled and damped for improved response and power handling capabilities.
• Woofer: The woofer cones are injection-molded, mica-filled polypropylene with UV inhibitors, synthetic rubber surrounds, and marine-grade synthetic fiber spiders. DMA is JL Audio's proprietary method of improving dynamic motor behavior. The DMA-optimized long-excursion design enhances output, bass extension and power handling of the speaker.
• Crossover: The woofers use a natural roll-off and the tweeter crossovers are 12 dB/octave. The crossover also features a polyswitch solid-state tweeter protection circuit.
• LEDs: There are six multi-color LEDs in the back of the tweeter casing, to create a glow on the woofer cone. Depending on what combination of LED wires is connected, they can light red, green, blue, yellow, pink, aqua, or white. A 12 volt power supply is needed to turn the LEDs on. JL Audio recommends a 150 mA fuse on the LED power lead of each speaker. The LEDs can also be controlled using JL Audio's MLC-RC controller (item number 13699816, sold separately).