About the JL Audio C6-275cm

Product highlights:
- C6 Series 2-3/4" midrange
- single 2-3/4" mineral-filled polypropylene woofer
- for use with an active crossover
- power handling: 50 watts RMS (80 watts peak)
- frequency response: 300-10,000 Hz
- impedance: 4 ohms
- sensitivity: 85.5 dB at 2.83 volts
- top-mount depth: 1.42"
- screw-on mounting adapter rings included
- grille included
- warranty: 1 year
- MFR # 010-03845-00
- Item # 13699060
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
JL Audio C6-275cm owner's manual
If you need assistance accessing this owner's manual, please give us a call.- One midrange driver
- One threaded 4-hole bracket (installed)
- One threaded 2-3/4" Bracket
- One threaded 3-1/2" Bracket
- Four 1-1/4" Screws
- Two 1" Screws
- One JL Audio logo grille badge
- One 0.187" Female quick slide (crimp-on/14-16 gauge)
- One 0.110" Female quick slide (crimp-on/14-16 gauge)
- Owner's Manual
- Warranty information
More details on the JL Audio C6-275cm

Features & specs
General | ||
---|---|---|
Speaker Size | 2 3/4 | |
Driver Design | 1-way | |
Woofer Design | --- | |
Woofer Material | --- | |
Woofer Surround | Rubber | |
Midrange Design | Cone | |
Midrange Material | Mineral-Filled Poly | |
Tweeter Design | --- | |
Tweeter Material | --- | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 4 | |
Weather-resistant | No | |
Grilles Included | fine mesh | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 83.5 | |
Sensitivity at 2.83 volts | 86.5 | |
Frequency Response | 350 - 4.8k Hz | |
Maximum RMS Wattage | 50 | |
Peak Power Handling (Watts) | --- | |
Top-mount Depth (Inches) | 1 1/2 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 2 9/16 | |
Mounting Height (Inches) | 0.27 | |
Frame Width | 2.95 | |
Frame Length | 2.95 |
Product Research
Features
Motor Structure: JL Audio uses a proprietary Dynamic Motor Analysis (DMA) to scientifically optimize the motor linearity, leading to reduced distortion and accurately reproduced transients.
Power Handling: JL Audio publishes multiple power specifications for this speaker, 50 watts continuous power handling (RMS) and 25-80 watts recommended amplifier power (RMS). We've listed the conservative combination of 25-50 watts RMS in the specs table.
Midrange: Three pair of threaded brackets are included for mounting the midrange drivers:
- Custom Mount: Out of the box the midrange drivers are mounted in the round 4-hole brackets. The grilles can also be added to the 4-hole brackets.
- Factory Mount 1: Use this to mount the midrange in factory 3½" applications.
- Factory Mount 2: Use this to mount the midrange in factory 2¾" applications.
Crossover: No crossover is included with this midrange; JL Audio recommends using a digital signal processor with active crossovers.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...