About the JL Audio C6-650

Product highlights:
- component speaker system includes two 6-1/2" woofers, 2 tweeters, and 2 external crossovers
- 6-1/2" injection-molded mineral-filled polypropylene woofer cone with rubber surround
- separate 1" edge-driven silk dome tweeter
- 2-way external crossover with 4-position tweeter level
- handles up to 100 watts RMS (150 watts peak power)
- frequency response: 53-21,000 Hz
- sensitivity: 87.37 dB
- woofer top-mount depth: 2.6"
- includes flush- and surface-mount tweeter hardware
- woofer and tweeter grilles included
- warranty: 1 year
- MFR # 010-03391-00
- Item # 13699133
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
JL Audio C6-650 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two C6-650cw Woofers
- Two C6-100ct Tweeters (36" wires attached)
- Two C6-650-xo Crossovers
- 2 Woofer grille frames
- 2 Woofer grilles
- 2 Flush-mount tweeter housings
- 2 Surface-mount tweeter housings
- 2 Metal spring clips for flush-mount tweeter housings
- 2 Speed clips
- Two M4x30mm Machine screws
- Two 1" Flat-head screws
- Four 1" Pan-head screws
- Eight 1-1/4" Pan-head screws
- 2 Self-adhesive JL Audio badges
- 2 Crimp-on 0.187" male quick slides
- 2 Crimp-on 0.110" male quick slides
- 2 Crimp-on 0.187" female quick slides
- 2 Crimp-on 0.25" female quick slides
- Owner's Manual
More details on the JL Audio C6-650

Features & specs
General | ||
---|---|---|
Speaker Size | 6 1/2 | |
Driver Design | 2-way | |
Woofer Design | Cone | |
Woofer Material | Mineral-Filled Polypropylene | |
Woofer Surround | Rubber | |
Midrange Design | --- | |
Midrange Material | --- | |
Tweeter Design | 1" Edge-Driven Dome | |
Tweeter Material | Silk | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 4 | |
Weather-resistant | No | |
Grilles Included | Black, Steel mesh, Plastic mounting ring | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 87.37 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 53 - 21k Hz | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | --- | |
Top-mount Depth (Inches) | 2 11/16 | |
Bottom-mount Depth (Inches) | 2 13/16 | |
Cutout Diameter or Length (inches) | 5 9/16 | |
Mounting Height (Inches) | 0.363 | |
Frame Width | 6.494 | |
Frame Length | 6.494 |
Product Research
Features
Cast Alloy Baskets: The woofers feature cast alloy baskets incorporating JL Audio's patented Elevated Frame cooling system. This technology, also found on JL's flagship components, delivers cool air through slots directly above the top-plate to the voice coil, improving power handling and minimizing power compression.
Motor Structure: JL Audio uses a proprietary Dynamic Motor Analysis (DMA) to scientifically optimize the motor linearity, leading to reduced distortion and accurately reproduced transients.
Power Handling: JL Audio publishes multiple power specifications for this speaker, 100 watts continuous power handling (RMS) and 30-150 watts recommended amplifier power (RMS). We've listed the conservative combination of 30-100 watts RMS in the specs table.
Size Classification Note: Some manufacturers, including JL Audio, call this size woofer a 6½". Because it requires a larger cutout than a standard 6½" speaker, Crutchfield has traditionally referred to this size woofer as a 6¾". Please enter your vehicle information to confirm fit.
Tweeter Mounting: Using the included housings the tweeters can be flush-mounted or surface-mounted, resulting in these dimensions:
Flush Mount | Surface Mount | |
---|---|---|
Mounting Height | 0.3" | 1.05" |
Depth | 0.875" | 0.84" (screw depth) |
Frame Diameter | 2.125" | 2.125" |
Cutout Diameter | 1.85" | N/A |
Selectable Tweeter Output Level: Each crossover allows you to select the tweeter output level according to your system requirements and personal preference; the tweeter level can be set to -4 dB, -2 dB, 0 dB, or +2 dB.
Crossovers Connections: The crossover inputs and outputs are screw terminals; they will accommodate bare wire or spade connectors up to 0.32" wide. There are two mounting holes in each crossover.
Crossover Dimensions:
- Width: 3⅜"
- Height: 1½"
- Depth: 4¾" (plus wire)
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...
Very nice and clean sound, decent mid bass
Lance from San Tan Valley, AZ