About the JL Audio RBC-1

JL Audio amplifiers feature bass-boost circuitry to help you adjust low-frequency impact in your vehicle. The RBC-1 wired remote bass control works with all of JL Audio's A-Series, G-Series, RD Series, mono JX-Series, and most Slash v2 amps. You can mount the RBC-1 controller in the front of your vehicle and dial in the amount of bass you want from the driver's seat — mounting instructions, hardware, and a 18' cable are included.
Connect the RBC-1 to your amp, and it converts the amp's selectable bass boost (0 or 6 dB) to a variable boost (0 to 12 dB). With the Slash v2 amps, the RBC-1 takes the place of the amp's boost knob, allowing you to adjust your bass boost from 0 to 15 dB. With RD Series and JX-Series mono amps, the RBC-1 controls the amp's subwoofer level, from full mute to full volume.
Product highlights:
- remote bass control for JL Audio A-Series, G-Series, RD Series, and Slash v2 amplifiers (except the 300/2v2 and the 300/4v2)
- allows variable (0-12 dB) bass boost in JL Audio A-Series and G-Series amps
- remote level control for RD Series and mono JL Audio JX-Series amps (JX250.1, JX500.1, and JX1000.1)
- 18' remote cable and mounting hardware included
- 13/16"W x 13/16"H x 1-5/8"D
- warranty: 2 years
- MFR # 98015
What's in the box:
- Bass Controller with attached knob and 9" cord terminated by a female RJ-11 port
- 18' control cable with a male RJ-11 connector on each end
- 2 Nuts
- 2 Washers
- Installation Instructions
Reviews (191)
Customer reviews for JL Audio RBC-1
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the JL Audio RBC-1

Product Research
Features
Overview: The JL Audio RBC-1 Wired Remote Bass Controller is designed to remotely control the Bass EQ boost or Input Level feature of JL Audio amplifier equipped with a "Remote Bass" or "Remote Level" port. When the RBC-1 is connected, the on-board "Boost" control of the amplifier is defeated and the RBC-1 becomes the only active boost controller.
Compatibility: The JL Audio RBC-1 Wired Remote Bass Controller can be used with the following JL Audio amplifiers and powered subwoofers:
- Slash v2 Series: 600/1v3, 1200/1v3
- Slash v3 Series: 250/1v2, 500/1v2, 1000/1v2, 450/1v2
- Original Slash Series: 500/1, 1000/1, 450/1, 500/5
- G-Series: All models
- A-Series: All models
- e-Series: All models (including marine versions)
- M-Series: M1400, M1700, M2150, M2250, M4300, M4500, M6450, M6600
- JD-Series: JD250/1, JD500/1, JD1000/1
- JX-Series: JX250/1, JX250/1D, JX500/1, JX500/1D, JX1000/1D
- HX-Series: HX300/1 (in low-pass mode)
- MHX-Series: MHX300/1 (in low-pass mode)
- MX-Series: MX300/1, MX500/1, MX600/3 (in low-pass mode)
- RD-Series: RD500/1, RD1000/1, RD1500/1, RD900/5
- PowerWedge+: All models
- MicroSub+: All models
Loading accessories...
Customer Q&A
21 questions already asked
Loading articles...
It's a bass knob, and it does exactly what bass knobs do. It cranks up the bass when you're listening to DJ Magic Mike cutting records, and it turns it down when you get behind the revenue man at a traffic light.
Gary from Hearne, TX