About the EFX Rogue Amplifier Wiring Kit
Install an amp in your powersport vehicle
This 10-gauge powersports wiring kit from EFX allows you to install an amplifier in your motorcycle or ATV. Completely tinned oxygen-free copper wire resists corrosion, even in wet conditions. The kit includes everything you need to install your new amp, from power and ground cables, speaker wires, and inline fuse, right down to zip ties and shrink wrap. Add some good speakers and you'll be ready to rock. This wiring kit is suitable for powering a Class D amplifier with a total output up to 300 watts RMS.
Product highlights:
- amplifier wiring kit
- 6 feet of 10-gauge power cable
- 6 feet of 10-gauge ground cable
- 3 feet of 18-gauge turn-on lead wire
- two 4-foot speaker wires
- in-line waterproof mini-ANL fuse holder and 30-amp fuse
- 2 load resistors (required for 2014-up Harley with factory BOOM audio system)
- assortment of wire termination hardware, tools, and cable ties
- warranty: 1 year
- MFR # RPAK10PS6
What's in the box:
EFX Rogue Amplifier Wiring Kit owner's manual
- Integrated 6' power and ground wires (10 ga.) w/ inline mini-ANL fuse holder
- 3' Remote turn-on lead terminated in a male slip-on connector
- Two 4' sections of 16 ga. speaker wire
- 30A Mini-ANL fuse
- Two 47 ohm / 1/2 watt resistors
- 3 Sections of heatshrink tubing
- Ten 8" wire ties
- Two 10 ga. spade terminals
- Two 10 ga. terminal boots (black / blue)
- Four 18 ga. spade terminals (blue)
- One 18 ga. spade terminal (red)
- Four 16 ga. female disconnect terminals (blue)
- One 18 ga. female disconnect terminal (red)
- One 18 ga. crimp connector
- 2 Allen-keys (2mm / 3mm)
- Owner's manual
Customer reviews for EFX Rogue Amplifier Wiring Kit
Loading...
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the EFX Rogue Amplifier Wiring Kit
Product Research
Features
Compatibility: The RPAK10PS6 kit is designed for amplifiers with fuse ratings up to 30 amps.
Kit Contents: This amp wiring kit includes the following:
- Power/Ground/Remote wire: The power/ground wires use
OFC (oxygen-free copper) for high-current delivery. The wires use fine
strands of copper and soft-touch insulation for maximum flexibility. The
power and ground wires are pre-attached to each other and all three wires
feature pre-attached braided sleeves for added protection.
- 6' length 10 ga. blue power wire with in-line waterproof fuse holder and a ring terminal (0.336" inside diameter, 0.55" outside diameter).
- 6' length 10 ga. black ground wire with a ring terminal (0.336" inside diameter, 0.55" outside diameter).
- 3' length of 18 ga. blue turn-on lead terminated in a 0.31" male quick-connect.
- Speaker Wire: Two 4' sections of dual-strand, 16 ga. speaker wire with protective braided sleeve.
- Fuse: One 30A mini-ANL fuse is provided.
- Resistors: Two 47Ω/ 1/2 watt speaker load resistors are provided for use with 2014-up Harley-Davidson motorcycles with a factory BOOM audio system.
- Connectors: The kit includes the following crimp-on
terminals:
- Two 10 ga. crimp-on spade connectors (with 1 blue and 1 black rubber insulator boot).
- One 18 ga. crimp-on spade connector with red plastic boot (for remote turn-on lead).
- Four 16 ga. crimp-on speaker female disconnect terminals (blue).
- Four 16 ga. crimp-on speaker spade terminals (blue).
- One 18 ga. crimp-on butt connector for remote turn-on lead (red).
- One 18 ga. crimp-on female disconnect terminal (red).
- Additional Accessories:
- Two Allen-keys (2mm/3mm)
- Ten 8" wire ties
- Three sections of heat-shrink tubing.
- Instructions
The EFX Rogue Amplifier Wiring Kit replaces these items
EFX Harley-Davidson Amplifier Wiring Kit
- 6 feet of 10-gauge power cable
- 6 feet of 10-gauge ground cable
- in-line waterproof mini-ANL fuse holder and 30-amp fuse
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great wiring for my amp in my HD Electraglide.
William from Beverly, WV