About the Scosche SA-69 Speaker Mounting Brackets
What's in the box:
Scosche SA-69 Speaker Mounting Brackets owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two 6x9 Speaker adapter brackets
- Eight 15mm Elevator bolts
- 8 Flat washers
- 8 Nuts
- Eight 3/4" Screws
- 8 Speed clips
- Instructions
Other info:
- MFR # SA-69
- Item # 142SA69
- California customers: Please click here for your Proposition 65 WARNING.
More details on the Scosche SA-69 Speaker Mounting Brackets

Product Research
Features
Overview: The SA69 fits many factory 6x9 speaker locations, allowing you to mount select 5¼s and 6½s in its round opening. There is also a scored knockout for mounting a separate tweeter. (Please refer to the Crutchfield Vehicle Selector to confirm fit in your vehicle.)
6½ Speakers: The brackets have screw holes for standard 3-hole and 4-hole 6½ patterns, and new holes can easily be drilled in the plastic brackets if needed. The cutout diameter is just over five inches, meaning most speakers we describe as 6½ will fit, but several manufacturers make larger speakers they also call 6½, that definitely will not fit. (We call these speakers 6¾, and we have data in place to determine whether or not all of our speakers will fit into the brackets.)
5¼ Speakers: While a 5¼ speaker will mount easily in this bracket given the bolt pattern, the frame of many 5¼s (about one in three) is smaller than the opening in the bracket, meaning a speaker baffle might also be needed to seal the rear of the speaker.
Tweeters: The knockouts for mounting separate tweeters have several scored concentric circles, ranging from approximately ⅝" to 1¾". By design, the tweeter plug is not easily removed, it will need to be cut out.
Dimensions:
- Length: 9.32"
- Width: 6.45"
- Opening Diameter: 5.081"
- Bracket Thickness: 0.162"
Loading...
Loading accessories...
Customer Q&A
12 questions already asked
Loading...
Loading articles...
Perfect fit. Does what it's supposed to. These work great for Rockford Fosgate 6.5" and JL 6" (which are actually 6.5") Speakers. These won't fit JL 6.5" (actually 6.75") speakers without modification.
Dave from Las Vegas, NV