About the NavAtlas NT308BPK
Bring the bass to your UTV
Bring the bass to your UTV
Bass is cool, even in the outdoors, and this NavAtlas powersports sub/amp bundle brings plenty of it to your UTV. Designed for the outdoors, these rugged components are tough enough for the trail and they'll sound terrific.
Two 8" subwoofers
Handling up to 200 watts RMS each, these 8" NT308W roll cage subwoofers will add plenty of low-end thump to your outdoor adventures. They're built tough with ABS plastic enclosures, IMPP cones, rubber surrounds, and impact-resistant grilles, so you won't have to worry about bass performance when you're playing in the mud.
A rugged, outdoor-ready amp
The subs are powered by the powerful, weather-ready NavAtlas BMA5000M mono amplifier. This compact, 500-watt Class D amp is made for life in the outdoors and it's ready to rock those rollbar subs. A fixed low-pass filter keeps things sounding solid. NavAtlas includes a wired remote so you can control the boom without stopping.
Product highlights:
General Features:
- package includes two NT308W 8" subwoofers and a BMA5000M mono amp
- designed for easy installation on your UTV
NT308W roll-cage subwoofers
- 8" subwoofers made for off-roading (pair)
- IPX5 water resistance
- weather-resistant IMPP woofer
- Butyl rubber surround
- power handling: up to 200 watts RMS (400 watts peak)
- frequency response: 60-500 Hz
- sensitivity: 85 dB
- impedance: 4 ohms
- warranty: 1 year
BMA5000M mono amplifier
- weatherproof Class D design
- 500 watts RMS x 1 at 2 ohms
- 250 watts RMS x 1 at 4 ohms
- fixed low-pass filter
- wired remote
- warranty: 1 year
- MFR # NT308BPK
What's in the box:
NavAtlas NT308BPK owner's manual
- BMA500M:
- Monoblock amplifier (attached 6' power lead and 12" ground lead)
- Fuse holder w/ 3" wire leads on each end (installed 40A ATC fuse)
- Two 6' speaker cables w/ locking-connectors on both ends
- 10' Input cable (left/right male RCAs / Turn-on lead / female coax digital connectors on one end and locking-connector on other end)
- Remote level-control (attached 115" cable)
- Four 12mm screws
- Spare 40A ATC fuse
- Owner's manual
- NT308W Subwoofer (x2):
- 8" Roll-cage subwoofer (attached mounting bracket / 10" safety cable / 6" speaker cable)
- 2 Rubber bushings
- Owner's manual
Customer reviews for NavAtlas NT308BPK
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the NavAtlas NT308BPK
Product Research
Features
Overview: The NavAtlas NT308BPK powersports package includes two roll-cage mountable 8" subwoofers and a BMA5000M mono amplifier, powering both subwoofers with 250 watts RMS. The package also includes loomed amplifier power wire, two sets of pre-cut speaker wire with locking-connector ends, and a remote level-control that can be mounted in the dash or console for easy bass-level adjustment.
BMA5000M Mono Amplifier: The included BMA5000M amplifier is a Class-D monoblock amp capable of powering the two subwoofers with up to 250 watts RMS (500 peak power). The amp features a fixed lowpass crossover on the output and is housed in a durable waterproof housing, designed for outdoor use. Wiring for the amp uses proprietary locking-connectors on both the inputs and outputs and includes the following:
- Power/Ground: Pre-attached 6' power and 12" ground wires are provided with rubberized connection at the amp. An ATC fuse holder and 40A fuse are included for attachment at the battery.
- Input Harness: A 10' Input harness includes left/right analog RCAs and a coax digital connector. A
remote turn-on wire is also included.
- Note: The amplifier features signal sensing turn-on circuitry for automatic activation. Lower level signals may require the remote wire to be connected to the headunit's 12V turn-on output.
- Speaker Output: Two speaker output ports are provided for the included 6' speaker leads. Each set of speaker wire includes locking connectors on both ends for a secure and waterproof connection at the amp and at the speakers.
- Signal Output (Pass-Thru): The BMA5000M amplifier includes a signal thru-port for daisy-chaining an additional amplifier (sold separately).
- Remote Level-Control: A dash-mountable remote level-control is provided for adjusting the volume of the subwoofers from the dash or console. The remote level-control includes an attached 115" cable with locking connector for attachment to the amp.
NT308W Roll-Cage Subwoofers: The NavAtlas NT308BPK system features two 8" subwoofer drivers mounted in roll-bar mountable speaker pods. Each subwoofer is made with an IMPP (Injection Molded Polypropylene) cone and butyl rubber surround, mounted inside a UV-resistant ABS enclosure. Both speaker enclosures carry an IPX5 ingress protection rating, making them resistant to direct water spray. Each 4O speaker is rated for 200 watts RMS (400W peak) and has a frequency response from 60Hz-500Hz.
- Mounting: The NT308W roll-cage subwoofers include built-in mounting clamps designed to attach to round roll-cage or wake-tower tubing ranging in diameter from 1.5" to 2.75". The mounts allow the speaker pods to be rotated up to 360° and locked into place, letting you aim the subwoofers for optimal sound coverage. Each speaker pod includes a pre-attached 10" safety cable.
- Wiring: Each roll-cage subwoofer includes a pre-attached 6" section of speaker wire that's protected with a heavy-duty rubber coating and terminated in a waterproof locking-connector.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
