About the PowerBass OE-675

Product highlights:
- 2-way car speakers
- designed to replace 2-ohm factory speakers — please call to confirm compatibility with your vehicle
- not compatible with an aftermarket car stereo, unless you add a 2-ohm stable outboard amplifier to your system
- 6-3/4" injection molded polypropylene woofer cone with butyl rubber surround
- 3/4" aluminum dome tweeter
- handles up to 60 watts RMS (180 watts peak power)
- frequency range: 62-21,000 Hz
- sensitivity: 88 dB
- top-mount depth: 1-7/8"
- impedance: 2 ohms
- warranty: 1 year
- MFR # OE-675
- Item # 151OE675
What's in the box:
PowerBass OE-675 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two 2-way speakers
- Two 12" Lengths of speaker wire (each has quick-slides on one end and bare wire on the other)
- Eight 1" Screws
- 8 Speed clips
- 4 Red plastic wire caps
- Application guide
- Template
- powerbass Facebook page note
- Window sticker
More details on the PowerBass OE-675

Features & specs
General | ||
---|---|---|
Speaker Size | 6 3/4 | |
Driver Design | 2-way | |
Woofer Design | Cone | |
Woofer Material | Injection-Molded Polypropylene/Carbon Fiber | |
Woofer Surround | Butyl Rubber | |
Midrange Design | --- | |
Midrange Material | --- | |
Tweeter Design | 3/4" Dome | |
Tweeter Material | Aluminum | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 2 | |
Weather-resistant | No | |
Grilles Included | No | |
Parts Warranty | 1 Year | |
Labor Warranty | 1 Year | |
Specifications | ||
Sensitivity (1W at 1 meter) | 88 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 62 - 21k Hz | |
Maximum RMS Wattage | 60 | |
Peak Power Handling (Watts) | 120 | |
Top-mount Depth (Inches) | 1 7/8 | |
Bottom-mount Depth (Inches) | N/A | |
Cutout Diameter or Length (inches) | 4 15/16 | |
Mounting Height (Inches) | 0.578 | |
Frame Width | 6.239 | |
Frame Length | 6.239 |
Product Research
Features
Mounting: In addition to fitting standard 6-1/2 and 4-hole 6-1/2 applications, the OE-675 also has a standard 6-3/4 bolt pattern. However, if mounted in a 6-3/4 location the holes for the smaller pattern create an air leak, which should be sealed using a speaker baffle, or something similar.
Application: On their website, PowerBass notes the 2Ω OE-Series speakers are not designed for use with aftermarket head units or amplifiers. However, if an amplifier is 2Ω stable, with appropriate output power, the speakers are compatible.
The PowerBass OE-675 replaces these items:
- 6-3/4" injection molded polypropylene/carbon fiber woofer cone with butyl rubber surround
- 3/4" aluminum alloy dome tweeter
- handles up to 60 watts RMS (180 watts peak power)
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Great replacement speakers for my Tesla Model S. Sound is FAR better and richer than the tiny magnet stock speakers.
Josh from St Petersburg, FL