About the Shure PGA98HX

Product highlights:
General Features:
- designed for wind and brass instruments
- condenser microphone
- male XLR connector
- cardioid pattern for noise rejection and feedback suppression
- cast zinc housing
- suitable for studio and live sound applications
Specifications:
- frequency response: 60-20,000 Hz
- sensitivity: -52 dBV/Pasca
- output impedance: 850 ohms
- maximum SPL: 130 dB
- requires phantom power (11 to 52V) on your mixer or audio interface
- weight: 8 oz.
- male XLR connector
Included Accessories:
- storage bag
- XLR cable
Other Info:
- warranty: 2 years
- MFR # PGA98H-XLR
- Item # 183PGA98HX
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
- Cardioid condenser instrument microphone with attached 5' cable and preamplifier (male XLR plug)
- Horn clamp (installed)
- 15' XLR mic cable (male XLR on one end and female XLR on other end)
- Foam windscreen
- Zippered storage pouch
- 7" Hook-and-loop cable tie
- User Guide
- Limited Warranty sheet
- Warnings and Safety Instructions
More details on the Shure PGA98HX

Features & specs
General | ||
---|---|---|
Application | For live & studio use | |
Type | Condenser | |
Polar Pattern | Cardioid | |
Phantom Power | Y | |
On/Off Switch | No | |
Connector | XLR | |
Specs | ||
Frequency response | 60-20k | |
Sensitivity | -52dBV/Pa | |
Max SPL | 130 dB | |
Diameter | 0.762 | |
Length | 1.168 | |
Weight | 8 oz. | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years |
Product Research
Features
Overview: The Shure PG ALTA series of microphones is designed and manufactured with the highest quality and construction. The PGA 98H microphone is designed specifically for horn and woodwind performance and recording. It has a horn clamp with a flexible, discrete gooseneck design. At the end of the 5' cable is a preamplifier with an XLR connection for plugging into mixer or audio console. The PGA 98H also comes with a 15' XLR-XLR cable, a foam windscreen, and a zippered storage pouch.
Pickup Pattern: The PGA 98H has a cardioid polar pattern, which reduces feedback and rejects unwanted background noise. The microphone has dual mesh grilles with an arrow to indicate which direction to aim the microphone toward the source. The tailored response microphone cartridge is designed for clear reproduction of wind instruments sound sources.
Phantom Power: Condenser microphones require power to operate. A 48-volts DC power supply is recommended for the PGA 98H-XLR, however, it can operate with lower voltages. Phantom power is usually provided by most mixers or audio interfaces where the microphone will be connected. A balanced microphone cable is required.
Construction: The microphone has an industrial design with a black metallic finish and grille for an unobtrusive visual presence.
Mounting: The PGA 98H comes with an integrated, spring-loaded horn clamp that allows you to attach the microphone directly to the horn of a woodwind or brass wind instrument. The flexible gooseneck lets you position the microphone exactly where you want. The included foam windscreen is recommended for outdoor performances.
XLR Connector: The Shure PGA 98H has a 3-pin male XLR connector on the preamplifier.
Specifications:
- Type: Electret Condenser
- Frequency Response: 60Hz - 20kHz
- Polar Pattern: Cardioid
- Phantom Power Requirements: 11-52 V DC (2 mA)
- Output Impedance: 850 ohms
- Sensitivity: -52 dBV/Pa (2.51 mV)
- Maximum SPL: 130dB SPL
- Overall Dimensions: 0.762" diameter, 1.168" length
- Weight: 8 ounces
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...