About the Niles RCA-SM2
The RCA-SM2 kit from Niles gives you easy control over your audio/video system, even if your gear is placed out of sight in a cabinet or closet. It includes everything you need to set up a complete IR (infrared) repeater system and control up to three A/V components:
- MS220 IR sensor Mount this small sensor in a convenient spot, like next to your TV. It sends the IR commands from your remote control to the IR hub.
- MSU140 IR hub Accepts incoming IR signals and passes them on to your A/V components.
- three MF1 flashers Infrared light-emitting devices that carry IR commands from the MSU140 to your A/V gear.
- 50 feet of CAT-5 cable to connect the IR sensor to the IR hub.
- complete IR repeater system
- controls up to 3 A/V components with included IR flashers
- MSU140 hub can accommodate an additional IR flasher or dual flashers for controlling as many as 8 components
- LCD- and plasma-proof wall-mountable sensor design works near flat-panel TVs
- UL-listed, regulated in-line power supply with universal voltage capability
- warranty: 2 years
- MFR # FG01585
What's in the box:
- MSU140 IR Main System Unit
- 4-Pin "screwless" sensor connector for category 5 cable
- Black MS220 with attached 10' IR cable
- AC power adapter with attached 74" DC output cord (DC output: 12V/250mA)
- US 2-pronged AC plug insert (for AC power adapter)
- 3 MF1 Microflashers with attached 10' cable (3.5mm miniplug terminal)
- 3 Self-adhesive IR blocking covers
- 6 Self-adhesive Microflasher pads
- 50' CAT-5 cable
- 4 Self-adhesive rubber feet
- Installation Guide
Customer reviews for Niles RCA-SM2
Average review:4.5 out of 5 stars
Thanks for submitting your review
More details on the Niles RCA-SM2
IR System Overview: An infrared (IR) extender system enables you to control your IR remote controlled A/V equipment from a remote location. This enables you to place your A/V components out of sight (behind cabinet doors, in the rear of a room, or in a different room) and still conveniently control your equipment.
IR System Components: This infrared extender system includes the following items:
- IR Main System Unit: The MSU140 IR Main System Unit provides a connection hub for the IR sensor or keypads and up to four IR flashers, and it is generally located near the A/V components. The Main System Unit is the heart of an IR extender system.
- IR Sensors: IR Sensors, like the included MS220 surface mount model, are the eyes of the system, receiving IR commands from hand-held remote controls and relaying the commands to the Main System Unit via a CAT-5 or a 4-conductor shielded cable. Generally, sensors are placed so that you can easily and naturally point your remote control directly at them. Sensors are also available in wall-mount, ceiling-mount and tabletop models.
- IR Flashers: These IR MicroFlashers re-transmit the infrared signals from the IR Main System Unit to your A/V components. Flashers are the voice of an IR extender system that speaks to your components.
Universal Compatibility: With the necessary accessories, an IR remote control extender system using the MSU140 is compatible with virtually all brands of A/V equipment and remote controls using carrier frequencies between 26 kHz and 105 kHz.
Wiring: If the distance from the IR sensor to the MSU140 is longer than the attached 10' cable, it can be extended with the included 50' Category 5 (Cat 5) cable. The Cat 5 cable should be terminated with the supplied quick connect sensor plugs. The IR flashers connect to the hub via 3.5mm (1/8") mini-plugs.
Status Input: The MSU140 features a 3-30-volt AC/DC status input jack which provides system status to sensors and keypads when connected to a switched AC or DC output on an audio receiver or preamp. An optional 12-Volt adapter may be necessary.
Universal Compatibility: When used in a complete system, this IR sensor is compatible with virtually all brands of A/V equipment and remote controls using carrier frequencies of between 25kHz and 90kHz. The MS220 is also compatible with the recently introduced Philips RCMM codes.
Universal Noise Suppression: The sensor has a patent-pending Universal Noise Suppression design that effectively eliminates IR interference from plasma and LCD TVs, CFL (fluorescent) lighting, and direct sunlight. This two-stage technology combines an optical noise filter with a smart electronic circuit to provide consistent, reliable control.
IR Receiving Range: You get 20' to 35' of remote control range, depending upon the strength of your handheld remote. The IR pickup angle is 30° off-axis (horizontal and vertical) at 25'.
Bi-colored LED: The LED glows green when the system is on and flashes blue to confirm reception of IR commands.
Mounting: The MS220 is designed to surface-mount almost anywhere using its adhesive back. Convenient mounting locations for the MS220 include: on the front panel of a television set, on the front surface of a wall, a cabinet, an appliance, or a speaker grille.
Universal Compatibility: When used in a complete system, this IR MicroFlasher is compatible with virtually all brands of A/V equipment and remote controls using carrier frequencies between 20kHz and 455 kHz.
Mounting: The MF1 is designed for pin-point relaying of IR commands, so it is typically mounted to the infrared remote sensor window of an audio/video component using the self-adhesive backing. The flasher hoods can be used to block any ambient light or other remote signals. The MF1 has a transmitting range of up to approximately 4'.
|MSU140 Main System Unit||4.75"||2"||0.813"|
|MS220 IR Sensor||2.047"||0.685"||0.466"|
4 questions already asked