Chat
Contact us
Close contact box
Connect ID #
099 699 138 4
Connect ID #
099 699 138 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Brandmotion 9002-7601 Universal backup camera — license-plate-mount

Item # 212BM7601

If you're looking for an affordable back-up solution, Brandmotion's tiny 9002-7601 backup camera gives you a...

If you're looking for an affordable back-up solution, Brandmotion's tiny 9002-7601 backup camera gives you a...

California customers:
Please click here for your Proposition 65 warning.

15 questions - 25 answers

Item # 212BM7601

In stock
$62.01

About the Brandmotion 9002-7601

Alexander H.

Parking buddy

If you're looking for an affordable back-up solution, Brandmotion's tiny 9002-7601 backup camera gives you a plentiful 150° view of what's behind you. With 420 TV lines, you'll get a crisp picture, even when it's dark outside, and it's a match for any car stereo with a standard composite video input and viewing screen.
Michigan stamp

Parking buddy

If you're looking for an affordable back-up solution, Brandmotion's tiny 9002-7601 backup camera gives you a plentiful 150° view of what's behind you. With 420 TV lines, you'll get a crisp picture, even when it's dark outside, and it's a match for any car stereo with a standard composite video input and viewing screen.

Brandmotion also gives you two ways to mount it: a universal license plate adapter or an adhesive-backed flush-mount. The package includes a 19-foot extension video cable that runs from the camera to the video screen up front, so it'll work in many larger vehicles.

Installing this camera yourself? Here's what you should know.

What does it do? Unless otherwise noted, a backup camera is only intended for use backing up your vehicle. (If you require a front-view or constant rear-view camera, check for that capability.)

What tools and supplies will I need? A panel tool, a wire cutter/stripper, a soldering iron, and a rosin-core solder with heat shrink tubing are recommended, along with whatever tools are needed to remove the radio from the dash.  

How much wiring is required? Wiring instructions vary from camera to camera. Some cameras have power wiring that can only be connected near the radio. Others let you power the camera at compatible reverse lights. In all cases, the camera must be wired for power and ground, the camera's video output must be connected to the radio/monitor, and the radio/monitor must be connected to a reverse trigger in your vehicle. Some radio replacement interfaces supply a reverse trigger wire for the radio -- using that wire to power your camera will damage the interface.

Will the included video cable be long enough? You'll need to route the camera's video cable from its mounting location outside your vehicle into your vehicle's cabin and all the way to the screen in the dash. This often requires drilling a small hole in your vehicle or filing some metal and or plastic. You'll also need to estimate the length of cable needed to run from the camera to the dash, which will not be a straight shot. Each camera's cable length is listed.

READ LESS

Product highlights:

  • Featured in our article: Best backup cameras for 2024
  • CMOS full-color rear-view camera with standard composite video connectivity
  • universal license plate and flush mounting options
  • compatible with any radio with an RCA video input (most aftermarket models, only a few factory)
  • 150-degree wide angle
  • waterproof
  • parking lines and mirror image (selectable at time of installation)
  • minimum illumination: 0.5 Lux
  • pixels: 648 x 488
  • 19' video extension cable
  • warranty: 3 years
  • MFR # 9002-7601

What's in the box:

  • Backup camera w/ license plate bracket (attached 2' cable)
  • 20' Extension cable
  • Surface bracket
  • Machine screw
  • Flat washer
  • Split lock washer
  • 2 Screws
  • Installation Instructions

Customer reviews for Brandmotion 9002-7601

Loading reviews...

Average review:

4.5 out of 5 stars
159 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on Samsung.com

This review was collected as part of a promotion

Pros:

Cons:

Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Brandmotion 9002-7601

Russ B.

Features & specs

Features and Specs
Camera Type Rear or Front
Resolution 316,224
Parking Guidelines Selectable
Lux Rating 0.5 lux (min)
Selectable Views N
Reversed Image Both
Horizontal Viewing Angle 150 degrees
Vertical Viewing Angle ---
Wireless No
Plug type Composite video

Product Research

Features

Universal Camera Kit: The BrandMotion Universal Camera Kit (9002-7601) allows you to add a camera to almost any vehicle with an aftermarket head unit that features a video monitor and composite video rear-view camera input. This universal kit includes a camera, license plate and surface mounting brackets, plus cables.

Note: This camera kit is meant as a driving aid only; never solely rely on the camera while driving. In addition to using the camera, always physically check to make sure everything is clear around your vehicle.

Composite Video Output: The BrandMotion Universal Camera Kit (9002-7601) is equipped with a composite video jack which allows it to connect to most aftermarket in-dash multimedia receivers with an integrated monitor and composite video camera input.

CMOS Image Sensor & Wide-Angle Lens: The camera features a CMOS images sensor that delivers 648 x 488 lines of resolution, as well as a wide-angle lens that produces a 150° wide viewing angle. The camera has a low-light lux rating of 0.5 for driving at night.

Mirror or Normal Image: The camera can display a "Mirror" or "Normal" image on your aftermarket monitor, so it can be used as a front or rear view camera. By default, it will display a Mirror image. In order to display a Normal image, you will need to cut the white loop-wire on the camera's attached cable.

Park Assist Lines: The backup camera provides parking assist lines on the screen of your aftermarket display monitor. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 4 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Green (Clear), Orange (Getting Close), Yellow (Very Close), and Red (Stop).

Note: The parking lines are Off by default. You can turn the parking lines On by cutting the green loop-wire on the camera's attached cable.

Waterproof Housing: The Crux camera features a IP67-68 waterproof housing.

Mounting Options: The backup camera can be installed behind the license plate or on a flat vehicle surface with minimal surface area requirements, using the included brackets. This camera kit will fit practically any vehicle with a license plate when using the license plate bracket. When using the small mount bracket the minimum surface required is 1.5" (w) x 0.75" (d). When using parking lines, it is recommended to mount the camera on the centerline of the vehicle.

Power & Ground: The camera's power (red) & ground (black) wires will need to be hardwired.

Loading accessories...

Customer Q&A

15 questions already asked

Q
Is this compatible with the JVC KD-X560BT head unit?
joel m  Nov 28, 2023
1 answer
A
Greetings Joel. Thank you for your question. Yes sir it is. JVC uses the standard RCA input for a universal backup camera, and the Brand Motion camera also uses the RCA connection.
hogan  Nov 28, 2023 (Staff)
Q
Is this a 4 pin or 5 pin connector?
forte  Aug 05, 2022
1 answer
A
The connector from the cameras attached wire to the composite video extension cable (included) is proprietary. They do not list how many pins, or what their functions are.
thomas  Aug 05, 2022 (Staff)
Q
do they sell the cable separately? I broke mine while installing and need to buy another one
michael k  Dec 26, 2019
1 answer
A
We don't carry the cable separately. You can try reaching out to Brandmotion directly at 734-619-1250
casey  Jan 15, 2020 (Staff)
Q
Can this be mounted behind the license plate so the camera bracket is hidden and the camera still be hanging over the top?
michael  Oct 11, 2018
2 answers
A
That's how I did it, bracket behind the plate
matthew  Oct 12, 2018
A
My car is a 2004 Tahoe, don't laugh! I suppose with some minor detail work there might be a way to mount the camera such that the lens is flush with the license plate. It would probably require some minor metal work but that was not worth the effort to me. Mine is as shown in the photo and has caused no problems. Good luck!
patrick  Oct 12, 2018
Q
Would this be a direct replacement for the factory backup camera on my Honda CRV EX-L 2007 (same location etc.) ? I will have my installer wire it to my new Alpine ILX107. Or will I need to leave the existing camera in existing location and find a new spot for this camera?
nancy  May 08, 2018
1 answer
A
Please contact an Advisor by phone (1-800-324-9695) or online chat to discuss fit and/or compatibility with your specific vehicle. They can give you more personalized advice to help you make a more informed buying decision. Thanks! :)
david  May 17, 2018 (Staff)
Q
Hi. How do i plug this into my new Pioneer AVH-291BT.? I have 2006 Ford F150. Any help is much appreciated. Thanks - Kevin
kevin  Jan 23, 2018
1 answer
A
If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.
kristina  Jan 30, 2018 (Staff)
Q
Will this cam work with the Alpine INE-W960HDMI unit?
robert b  Dec 30, 2017
2 answers
A
This device works well with the Pioneer radio unit in my vehicle. I do not know if it would work with an Alpine system.
jan  Dec 31, 2017
A
It should work if your unit has a RCA camera or video input. This camera has a good picture with good light collection at night.
bryan l  Dec 30, 2017
Q
I read the installation instructions and find no mention of a connection to the reverse wiring so that camera knows you are in backup mode. Please help?
paul  Aug 26, 2017
1 answer
A
Tech Support is included with your purchase from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website.
kenneth  Aug 26, 2017 (Staff)
Q
I do not see anything about a rear view mirror coming with this. If it is not included, why? Second, if it is not included what are you all using as a rear view mirror?
ggrr8t  May 05, 2017
1 answer
A
Thanks for your question. This is not marketed or listed for a rear view mirror so there is not one included. This is just an add on that would connect to your existing video receiver/display. You can do a quick search on the Crutchfield website for "Rear View Mirror" and will see different options available. If you need further help please contact an Advisor by phone (1-800-324-9695) or online chat. They should be able to answer any questions you may have.
kenneth  May 05, 2017 (Staff)
Q
Will this camera work with stock system in a 2013 Ram 2500?
victor  Aug 31, 2016
1 answer
A
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you.
kenneth  Aug 31, 2016 (Staff)
Q
how big is the camera head itself, I may have some clearance issues?
john  Aug 09, 2016
5 answers
A
Hi John. I have installed this on my vehicle. The picture quality is very good. It is about 3/4 inch square and the depth is about 1 to 1 1/4 inches deep (I can't measure exactly as the car is up on a lift). To get better clearance after my initial installation I notched my metal license plate to enable the pivoting camera head to bend lower to the ground. I have a low vehicle (Corvette). Good luck with your install!
jan  Aug 10, 2016
A
Its approximately 1" square.
alan  Aug 10, 2016
A
The camera head is about 3/4 inches square and extends behind the tag frame about one inch. But gives a great picture, even at night.
bryan l  Aug 10, 2016
A
The camera head is about 3/4" wide, 3/4" deep, and less than an inch high. It might be easier to see if I could upload a picture that I took with a ruler alongside the camera head. But, I hope the measurements help.
richard  Aug 10, 2016
A
It's less than the size of a quarter but bigger than a nickle the camera head itself. Plus it can be adjusted/angled downwards.
vern  Aug 10, 2016
Q
Does Brandmotion or any manufacturer offer any license light hole brackets for this camera so the camera is integrated into the car and not just bolted on to the license plate frame?
this guy  Jul 15, 2016
1 answer
A
I put the black bar behind my plate and the gooseneck comes up and over for a sleeker look... I installed it on my Porsche 911 turbo. I will say that the picture quality in the dark isn't the best. It works fine but it's grainier than I would like.
stephen howard  Jul 16, 2016
Q
Is the camera position on the license plate bracket adjustable right to left? My lift gate handle is centered over my license plate, so the camera might need to go a couple of inches to the side if it interferes.
quiviran  Feb 17, 2016
5 answers
A
The camera adjust left and right. It sticks out on my plate, which I don't care for. During the storm, it was repositioned on its own. My cousin had to adjust it for me because I personally do not know how to install or even adjust these techy devices. Hope this helps.
simone  Feb 18, 2016
A
NO the camera is fixed on the bracket, it can only move up and down.
david j  Feb 18, 2016
A
Hmmm not really. It does have some up/down tolerance...
stephen howard  Feb 18, 2016
A
It's centered on the bracket. But you can install it without the bracket, it comes with another attachment device.
juann  Feb 17, 2016
A
I placed the bracket behind the license plate and the camera hangs just above the plate. Mine is on a pick up truck and you didn't state what your vehicle is. For all the more space the bracket takes up placed as I did mine, I don't see how it would interfere with your latch.
earl  Feb 17, 2016
Q
Would this work with your Soundstream VR-651B Radio?
waits  Dec 05, 2015
1 answer
A
You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your current system. They will be able to pull up your gear and see if this will integrate. If it does not, then they will also be able to discuss other options with you.
jeff  Dec 05, 2015 (Staff)
SHOW MORESHOW LESS

Loading articles...

Compare the sound