About the Crux CUB-01

Product highlights:
- bullet backup camera
- 4' video cable with 27' extension included
- compatible with any radio with an RCA video input (most aftermarket models, only a few factory)
- extension cable required for most applications
- 170° wide angle
- resolution: 480 TV lines
- no front-cam capability
- parking lines included (selectable)
- 0.4 Lux minimum for night driving
- dimensions: 7/8" x 7/8" x 7/8"
- warranty: 1 year
- MFR # CUB-01
- Item # 249CUB01
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
- Rear-view camera (attached 4' cable)
- 27' Video signal cable w/ attached 3' power/ground wires
- Hole-saw bit (18.5mm)
- Wiring Instructions
More details on the Crux CUB-01

Features & specs
Features and Specs | ||
---|---|---|
Camera Type | Rear | |
Resolution | 480 TV lines | |
Parking Guidelines | Selectable | |
Lux Rating | 0.4 | |
Selectable Views | N | |
Reversed Image | Mirror | |
Horizontal Viewing Angle | 170 degrees | |
Vertical Viewing Angle | 90 degrees | |
Wireless | No | |
Plug type | Composite video |
Product Research
Features
Rear-View Camera: The Crux CUB-01 rear-view camera can be installed in a variety of vehicles with an aftermarket in-dash multimedia or navigation receiver installed. Your aftermarket receiver must feature an integrated video monitor and a composite video camera input. The camera allows you to view what's behind you on your in-dash receiver's video monitor when you put your vehicle in reverse.
Image Sensor & Lens: The Crux CUB-01 rear-view camera features a CCD image sensor that offers 480 lines of resolution. The bright f/1.2 lens has 170° (horizontal) x 90° (vertical) viewing angle. The minimum illumination is 0.4 Lux.
Park Assist Lines: The rear-view camera provides parking assist lines on the screen of your vehicle's in-dash aftermarket monitor. These parking lines are there to assist you when backing up into a parking space. There are two vertical lines which help you judge the left and right edges of the parking space and your vehicle. There are also 3 color-coded horizontal lines that are used to distinguish how close you are getting to the end of the parking spot - Green (Clear), Yellow (Getting Close), Red (Very Close).
Waterproof Housing: The Crux CUB-01 rear-view camera features a IP67 waterproof housing.
Flush-Mount Installation: You will need to drill a 3/4" (18.5mm) hole in your vehicle's rear exterior panel. A hole-saw bit is included. The rear-view camera mounts in this opening and features an integrated spring-loaded mounting bracket which secures the camera in place.
Connections: The rear-view camera features an attached 4' power/signal cable and comes with a 27' video cable with attached 3' power/ground wires. At the end of the video cable is a male RCA composite video plug, which connects to the composite, rear-view camera input of your head unit. The power (red) & ground (black) wires will need to be hardwired. Power can be obtained from your vehicle's reverse light circuit or from the +12V accessory wire of your aftermarket stereo (if applicable). The ground will need to be connected to your vehicle's metal chassis.
Loading...
Loading accessories...
Customer Q&A
12 questions already asked
Loading...
Loading articles...
Fits anywhere! Good picture! Includes a hole saw, but the tooth pattern looked a little aggressive to me, so I used a stepped drill bit instead. Installation looks almost factory, if 90's Camaros ever came with backup cameras!
Steven from Glen Burnie