Crutchfield Vehicle-specific Instructions

I would be happy to help, Stacey. The best way would be to use a line output converter with bass restoration to provide the best possible sound quality. The AudioControl LC2i Pro in the link below is an option that can be installed in any vehicle with powered speaker outputs from the radio. This unit corrects the poor EQ in your factory radio and provides strong RCA line-level outputs for the best possible sound from your amp/sub combo. https://www.crutchfield.com/p_161LC2IPRO/AudioControl-LC2i-PRO.html

We have a few installation interfaces that can keep your steering wheel audio controls working when changing to an aftermarket radio that supports it in your 2011 Chevy Impala, Stacey. We have options that work with the Bose premium audio or without! If you need help choosing the right radio and installation package for your needs, please do not hesitate to call us at 1-800-324-9695 and an Advisor would be happy to help!

Our install instructions cover factory existing speaker locations, Thomas. If you are adding a midrange speaker for your setup you would need to custom modify a location, and we do not provide instructions for that. You could also consider mounting your tweeters in a custom location, and using the door tweeter location to enlarge for a midrange speaker that fits (if you have factory tweeter locations in your Tundra). Custom speaker pods could also be a good solution, but we do not carry any that fit your ride. I hope this helps!

I would be happy to help, Michael. That is the "Active Feedback System", and it is a microphone built into each speaker with an amp that drives them. The microphone sends feedback to the amp. You cannot run any power through it, and due to the AFBS system if the stereo is replaced, the rear amplifier cannot be used. New speaker wires must be run from the new stereo to the amplifier location below the right rear speaker and spliced in, or wires run from your new radio directly to your new speakers.

Greetings Josh, and thank you for your question. In your cart below each item in your cart, there is a X REMOVE ITEM to remove that item, and yes you will need to do that again for each item needing to be removed.

Greetings Macon, and thank you for your question. Our mastersheet has the speaker color codes by the speakers. At the amp, it could be different. if you purchase the LC7i from Crutchfield, our techs have access to all the vehicles color codes and can provide that to you after your purchase. That would be part of the free tech support you get from us with your purchase.

Greetings Tina, and thank you for your question. Im not sure what you mean by over-ride. We do have installation gear to replace the factory radio with an aftermarket for the 2007 VWs. Please contact one of our advisors at 800-324-9695 for more assistance.

Our Mastersheet for your vehicle explains how to remove the factory radio and speakers and also includes basic wiring info for the speaker wire outputs for the factory Monsoon amplifier.

We cannot confirm any fit in the 2016 Freightliner sadly Jaylen, we simply have no fit guide information for 18-wheelers. I took a look at the radio setup on your truck with some pictures I found online, and it does appear visually that a single-din radio should fit. The first link below has a custom package with Sony CD radio, factory radio removal tools, and Infinity Reference 5 1/4" speakers for all 4 locations. We cannot confirm fit on the speakers or radio, so it is a good idea to take accurate measurements of the locations prior to purchase. Reach out anytime you need, I hope this helps! https://www.crutchfield.com/I-rXYEc222/cart/EmailCart.aspx?emKey=3159704

It would be necessary to fabricate a taller bracket than the American International NSB710 that we carry for this vehicle. Alternatively, you could make an additional spacer to use with the NSB710 brackets. The speakers will be just a bit too deep into the door panel to fit otherwise.

Greetings Mark, and thank you for your question. Noise can be coming from almost anywhere. Best I can tell you is double check all your wire connections, and make sure you have no power wires crossing audio signal wires.

Greetings Jeffery, and thank you for your question. Unfortunately we do not have them. Our supplier is Metra for all the speaker harness's. There could be another manufacture that may make something for the 2014 Camaro, I just would not know who. Wish I had better news.

We are certainly here to help, Gregory. We provide lifetime Technical Support with any order. If you are having any issues with install, do not hesitate to contact us by phone and we can help! We have live Advisors manning the phones 7-days a week!

Greetings, and thank you for your question. After the purchase we email the PDF to your email address.

We cannot diagnose issues with your original equipment Audi radio with the limited information from here, Paula. We do provide lifetime Technical Support on all products purchased from Crutchfield. All troubleshooting (especially wiring) should always be done with the battery disconnected. The pop and hissing is a huge concern to me, this most likely needs to be diagnosed by a specialist while being able to have access to your vehicle. I hope this helps a little Paula!

We would need to know the exact year of your Ford Fusion hybrid, Tim. Some times with newer factory amplified radios you will need to add a load generator to make sure the factory radio will still output sound. If you do not need a load resistor, you can simply add an aftermarket amp with speaker-level inputs. The 4-channel Kicker 46CXA360.4T in the first link below is a fantastic choice if you are not adding a subwoofer, the 5-channel variant in the second link is perfect for adding a large subwoofer as well! https://www.crutchfield.com/p_20646CX36T/Kicker-46CXA360-4T.html https://www.crutchfield.com/p_20646CX66T/Kicker-46CXA660-5T.html

It is tough to answer with the small amount of info, Joe. We provide lifetime Technical Support with every order, so if you are having issues with a radio install package you got from us call us and we can help!

The Bose package in the 1989 Vette was very interesting, John. The factory system uses amplified speakers that only work with the Bose radio. If you replace one of the factory speakers, you'll have to replace the entire system. If you are replacing the radio, it's best to run fresh speaker wire to the speaker locations and replace all four factory speakers with new aftermarket. Give us a call at 1-800-324-9695, and we can help you put a package together!

We do have a Mastersheet for the 2019 Chevy Traverse. For help with purchasing these instructions, please reach out to our advisors via online chat or phone at 1-800-324-9695. Keep in mind that these instructions are also available for free with vehicle-specific item purchases.

The Metra 72-8104 wiring harness would connect those JBL speakers into your front doors. I will link it down below. https://www.crutchfield.com/p_120728104/Metra-72-8104-Speaker-Wiring-Harnesses.html

Greetings Shelby, and thank you for your question. Those vehicle specific instructions are a sample of what they might look like if we were to email the PDF, but of course more specific to a certain vehicle. We currently do not have a Master Sheet developed for the 2020 Genesis G70. Even if we did, those cover new stereo, and new speaker installs, not an amplifier install. If you needed assistance installing your amplifier purchased thru Crutchfield, we have technical support that can help you find wiring codes if needed.

The factory XM tuner location is in the trunk, behind a trim panel Tom. The antenna location specifically is not listed. This original system cannot be retained when changing the radio, with any aftermarket radio. You will need to use the SiriusXM SXV300V1 tuner in the link below if you are looking to retain XM with an aftermarket radio, if your replacement radio has the XM specific input port and is "XM Ready". We provide lifetime Technical Support with every order, but we are limited in the info we can provide without. I hope this helps! https://www.crutchfield.com/p_220SXV300/SiriusXM-SXV300V1-Tuner.html

We do not have any direct fit antenna replacement options for the 2014 300, sadly. If you want to replace your radio and have the confidence to know you can solve the antenna issue, we have you covered Eric. This Universal Hideaway AM/FM antenna in the link below hides inside your dash or in the glovebox and is active, meaning it gets powered off your radio's power to provide good reception. This can bypass any broken original equipment antenna and also provide a much easier install than replacing your existing antenna. This simply gets installed when your new radio goes in, super easy! https://www.crutchfield.com/p_12044UA20/Universal-Antenna.html

If you purchased the radio from Crutchfield, feel free to contact our Tech Support team. They'll be happy to help with the install. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

Greetings Fjf6474, and thank you for your question. Our Master Sheets are vehicle specific, not aftermarket radio specific. What it will show you is how to remove/reinstall a stereo, and remove/reinstall speakers.

We do show that Boss unit fitting but that is based on the chassis fitting in the opening. The floating screen measures 9.245" (w) x 5.895 " (h) x 1.855" (d) so you may want to take some measurements beforehand to make sure it would not hit up against the shift. We have friendly advisors standing by if you wanted to dive a little deeper into the fitment for your particular Avalon so please give us a call at 800.324.9695 and we will be happy to help.

If you are installing products purchased through Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the item from Crutchfield, then you may want to contact the manufacturer.

We do not have information regarding the power handling of the factory speakers in your vehicle. For this information, it may be best to reach out to your local Honda dealer.

Most of the aftermarket radios still have AM/FM functionality built in but there's no specific model you have mentioned in this post. If you give us a call at 800.324.9695 one of our advisors can verify whatever unit are you looking to verify will have FM capabilities.

Greetings Raymond, and thank you for your question. For product recommendations please contact our advisors at 800-324-9695, as I'm sure they will have a few questions for you as well.

We email a PDF if provided an email address. If an email address is not provided, we mail a paper copy

Yes it does.

If your radio has that feature there would be a separate button on the face of the radio that says "Autoset" I believe it's near the seek/scan buttons. If you do not see that then you do not have that option.

If you purchased the receiver from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

for tacoma 2016 you have to connect the hi to low converter in the front speakers that the colors are of the front left speaker is positive pink and negative purple and the right speaker is positive light green and negative blue

I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

If you get the one for your car then you should be able to

I don't know.

You can check to see what fits your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what you will need for an installation in your vehicle.

Hi Edward. We certainly do. Follow the link below. You will select your vehicle and it's options and if one is available you can purchase and it will be emailed to you. If you need further help I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. https://www.crutchfield.com/p_264MASTER/Crutchfield-Vehicle-specific-Instructions.html

The total number of speakers could be 4 or 6. One of the 6 speaker systems is the upgraded Boston Acoustics sound system. If you don't have that sound system, then there is still a possibility you will have 6 speakers or 4 (none in the dash). Our advisors that can be reached by calling 1-800-324-9695 are able to help you identify the system in your vehicle so you can order the correct gear for it.

You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see what options are available and discuss the options with you.

Who knows

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

The factory subwoofer is an 8".

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

The ability to retain steering wheel controls with aftermarket receivers will be determined by the receiver you are using and the vehicle you have. For full information on this type of integration (including the parts you will need) please contact an Advisor by phone (1-800-324-9695) or online chat.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

If you have the version of the pickup that came without rear speakers, we have advisors that can be reached by calling 1-800-324-9695 who will discuss your goals to give you a personal recommendation on gear to add them. If you have the pickup that came with rear speakers and need help with the process to remove and replace them, then you should order the MasterSheet as that is the guide we developed to help our customers through the process.

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

If you are using the LC2i to install a powered subwoofer, then its best to tap into the factory sub's speaker wire. We provide technical support on items purchased from us who can help identify the wire colors and we send their toll free number on the order invoice

Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

We didn't find a factory installed subwoofer in either of the audio systems offered in the 2008 Volvo S80. There should be plenty of space in the trunk to add a subwoofer and we have advisors that will discuss your goals for the sound to give a personal recommendation on a subwoofer setup for you S80

I do not believe so. I used this on a 1995 Chevy, I installed a double din stereo in Call them, they will direct You.

Contact customer service and they will email a PDF version.

This is a page discussing our MasterSheets for vehicles and not an actual unit. However, we do have receivers that can be installed into your Acadia and work overhead monitors for rear seat entertainment systems. I recommend contacting an advisor by calling 1-800-324-9695 to get a personal recommendation

Ive purchased 25 or so instruction sheets from Crutchfield. All have been awesome

Yes, that car has a factory amp under the driver side dash.

I own a 2004 GMC Sierra and am not familiar with your vehicle; however, in running wiring, you should not run your power wire for your amp next to your speaker wiring. The size of your amp determines the size of your power wiring from your battery (usually specified by your power amp manufacturer). You can run a 14 - 16 gauge wire from your head unit's (which usually has a remote wire (blue) that controls when your amp turns on and off. Sometimes (as in mine), there are two blue wires (one might be blue/white) that controls either a power antenna and/or your remote amp). In my GMC Sierra, I ran the remote and power wires on the driver's side floor rail via the left kick panel and the speaker wiring on the passenger's side kick panel and floor rail. My rear side speakers are small 4x6 speakers so I opted to add two 6x9 inch JBL in their own enclosures under the seat along with a 10 inch Rockville self-contained speaker/amplifier unit. I added a 12 vdc relay so I could switch between the 4x6 and 6x9's for the rear sound. In addition, some amplifier units have a wired remote knob that you can place somewhere on your dash. I ran this wire on the driver's side; you can boost or cut the volume of your sub-woofer this way. Of course, I ran all wiring in wire looms. A central ground for your amp is critical and it must match the power of your amp. Be sure to clean the area where the grounding lug will contact sheet metal. Manufacturer's of amps usually recommend a vehicle grounding bolt (or a substantial bolt already on your vehicle making sure your lug contacts bare sheet metal). Over heating can result if you don't have a good ground. In addition, try to keep the ground within 3 to 4 feet of your amp. Some bolts require large lugs....I found mine at a boating supply store in town. They do sell wiring kits for amp/speaker installations on-line; just make sure they're high quality pure copper. Hope this helps a little.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

What is a 5 1/4 Crutchfield?

Hi Bert! Please chat with us online or by phone at 1-800-324-9695. We will need to gather a little more information from you in order to correctly answer your question.

You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you.

You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.

All of the vehicle specific instructions that are sent out to our customers include basic step by step processes for removal and replacement of the factory stereo, and speakers only. If you have a factory amplifier, and would like to discuss bypassing the factory amp in your vehicle, feel free to chat with us online or by phone at 1-800-324-9695.

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

The number of speakers in the rear deck of this vehicle will vary depending on the factory system found in it. I recommend contacting an advisor on 1-800-324-9695 to discuss check and get a personal recommendation on replacements for them

We have not received any answers from other customers on your question. I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

Mark, not sure of the question you wanted to ask, but the vehicle-specific instructions is merely to help as a guide to help remove radios and speakers in the car of choice. For more detailed information you can always reach out to Metra Online and Pac Audio both companies are the major players in aftermarket wiring kits for cars.

Hi Mark. The Q&A portion of our site allows customers to ask questions that can offer them a bit more insight of the product they are viewing, as well as allows them to connect with other customers who have purchased the same product which gives them the ability to discuss any particular ways they may be using a product in their application. When one of the Advisors answers a question here, we provide some basic information on the product, and ask the customer to call or chat with us to gather more detailed information, and ask additional questions. By reaching out to an Advisor, can also assess the customers need, and make a personalized product recommendation as needed.

I don't know

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

This is instructions showing how to remove the stock radio/speakers in vehicles and has no electronics to it. We have advisors that you can reach by calling 1-800-324-9695 who will be happy to discuss your goals for the vehicle to see if we have gear to help

I don't have a Pontiac and therefore cannot answer. Ask Crutchfield installation aides.

We may have the gear needed to install the iLX-207 into your vehicle. I recommend contacting an advisor on 1-800-324-9695 to discuss this as well as get a personal recommendation on a backup camera as well

No crossover was needed

These do not include any wiring information. They are the instructions on how to remove the radio and speakers.

What is your question?

You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

Keith, you should reach out to one of our advisors for more personalized help! https://www.crutchfield.com/support/ContactUs.aspx

It sounds like you have the version of the vehicle that does not have a pocket below the radio and this version does not need a mounting kit to hold the JVC radio in the dash; just reuse the factory radio mounting brackets

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

Feed back from ground wire ?

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

Hi Marcus, thank you for reaching out. The MasterSheets we offer will only supply you with step by step instruction on removal and replacement of your stereo and speakers. We do send out any wiring diagrams or instruction. If you are purchasing your new car stereo from us, you will have access to free technical support. They will be able to assist you with any wiring needs.

Hi Randall, thank you for your question. In order to ensure that we do have the exact information of your vehicle pulled up, and to check compatibility with your speakers and your truck, please chat with an Advisor online or by phone at 1-800-324-9695. They will be able to pull up your truck, and ensure that we do have the correct harnesses to make your speaker installation plug and play.

Sorry, I really don't know. I must have purchased the wiring harness long ago.

Hi Robert, thank you for your question. The reason you see multiple speaker sizes listed is because we have found that you can use multiple speaker sizes with the use of an adapter bracket. If the adapter brackets are necessary for your install location, and brackets are available for your vehicle, we will send those brackets to you free of charge with the purchase of the speakers. There are a few other vehicle qualifying questions we would need to ask in order to confirm we have the correct vehicle information pulled up for your Camaro. Chat with an Advisor online or by phone at 1-800-324-9695. They will be able to pull that information up and confirm the impedance of your speakers, as well as offer advice and recommendations for speaker replacements.

There are several variations of the sound system in that car. You should reach out to one of our advisors for more in-depth, personalized help! https://www.crutchfield.com/support/ContactUs.aspx

I have a 2012 Avalon, and I'd have a hard time believing electronics were more complex 5 years previous for a 2007 model car. Crutchfileld had a guide for my car that was very helpful - a guide specific to my car. They're inexpensive guides too. Yes you can upgrade, just a matter of how difficult it is. I would buy Crutchfield's guide specific to your car, and if for some reason that is not enough, talk to a Honda dealer for directions on how to take parts of the car apart to get at your amplifier. Possibly better yet, you might not need to access the old amp. Just bypass it and rewire the new amp in. My old amp for the stock stereo is still mounted in the car and my new audio system isn't affected at all. Dan

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

We could upgrade the speakers and potentially add modest amps and subs but we don't have any options to replace the radio. You can connect with one of our friendly product advisors to get personalized advice on what will best fit your needs: https://bit.ly/2QNxGQB

These are just instructions for showing you how to take your dash apart and getting around your car. you will need a harness to adapt the sony's included harness pigtail to the Subaru's OEM harness. this is the harness you will need..If your car didnt come with navigation... https://www.crutchfield.com/p_120707552/Metra-70-7552-Receiver-Wiring-Harness.html If your car did come with the navigation you will need the following harness. https://www.crutchfield.com/p_120701761/Metra-70-1761-Receiver-Wiring-Harness.html

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

yes

Absolutely. We have a few different harness options available depending on your factory configuration (Bose, navigation, steering wheel controls, etc.) and the aftermarket stereo model. For personalized assistance and recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx

We have gear to replace the radio with a GPS model and keep the stock speakers working with it in your Torrent. I recommend contacting an advisor on 1-800-324-9695 to get a personal recommendation on a GPS system. My Bio: https://www.crutchfield.com/bio/Paul

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

Depends on the model. Look online for the manufacturers manual. Some head units work with a specific app in some cases. Kenwood and Pioneer come to mind. Hope this helps!

Those are good questions! There's a lot more that we need to know to be able to help recommend between speaker sizes, and any other potential gear that will be needed to make them work to give you the sound you seek. I recommend contacting an advisor on 1-800-324-9695 to get this help with building a system for your Mustang My Bio: https://www.crutchfield.com/bio/Paul

Get new speakers, amplifier and DSP. The Bose system in my GMC is 200% better than "premium" stereo in my Ford

Our MasterSheet installation instructions (featured on this webpage), when available, are provided free of charge, with any purchase for your vehicle. For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx

It will automatically bring up the reverse camera if you wire it correctly. There is a wire on both the unit and the camera which must get 12V when you place the car in reverse - I connected both to the back up lights. You can use (and even add) steering wheel functions with the idatalink device. The device must be configured online (this is relatively easy) through the idatalink website. You can add features because the device allows two functions to be mapped to any button - one for a momentary press and a 2nd function for a press and hold.

The 9 speaker option has separate factory tweeters in both the front & rear door locations. The 7 speaker system only has tweeters in the front. For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer.

The ability to retain steering wheel controls with aftermarket receivers will be determined by the receiver you are using and the vehicle you have. For full information on this type of integration (including the parts you will need) please contact an Advisor by phone (1-800-324-9695) or online chat.

You've submitted your question on the webpage for our Crutchfield MasterSheet instructions so, I'm not sure what receiver model you're referencing. For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx

The MasterSheet instructions cover the access, removal & replacement of the original factory stereo and speakers. The instructions are still helpful if an aftermarket stereo has been installed.

For my vehicle (2006 Sebring) the instructions included dashboard disassembly and head unit installation as well as disassembly, panel removal and installation of all six speakers (dash, door and back seat side panels

Thanks for your question. For information on selecting the best amp for your subs I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help determine the differences between the amp models and help you make the best choice for your system.

We have yet to research the 2018 version of the Cherokee. Once we have the info available, you'll find it listed in the "Find What Fits" application on our website: https://www.crutchfield.com/car/carselector.aspx?lp=%2fCar%2foutfitmycar%2fmycar.aspx For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx

You can check to see what fits your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on fit and what you will need for an installation in your vehicle.

Much depends on if you have the factory 7 speaker or upgraded 10 speaker sound system (both come with the stock subwoofer). For additional assistance and personalized recommendations, feel free to contact us directly by phone or through our online chat service: https://www.crutchfield.com/support/ContactUs.aspx

Factory stereos from one type of vehicle do not often work in other vehicles. For additional assistance and personalized recommendations, feel free to contact us directly: https://www.crutchfield.com/support/ContactUs.aspx

If you purchased from Crutchfield, feel free to contact our Tech Support team. They can walk you through the removal of the factory receiver. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what fits and what you will need for an installation in your vehicle.

Wiring info is provided with the gear and wiring adapters when ordered, but the MasterSheets themselves do not include this information. Detailed wiring can usually be assisted with by tech support when the gear is purchased from Crutchfield.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can see the best option for a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer, or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They should be able to help answer your question.

You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss what is compatible with your factory system. They will be able to pull up your vehicle and see how everything integrates and what you will need for installation.

The best spot will always be on the roof, but not wanting to do that I mounted it on the dash as close to the windshield as possible. It comes with a metal plate that sticks down and you mount the antenna too. Has worked fine so far.

It can work on the dashboard but you will find the signal drops much more often as the roof of your vehicle blocks the signal in certain directions. The vehicle antennas also use the metal mounting surface on the exterior of your vehicle as the grounding plane so, you'll get much more consistent reception when mounted on an exterior metal surface with a clear view of the sky: https://www.crutchfield.com/learn/videos/car/antenna_installation.html?g=247250 I hope that helps. My Bio: https://www.crutchfield.com/Support/Bio.aspx?bio=5

You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss what is compatible with your factory system. They will be able to pull up your vehicle and see how everything will integrate. If it does not, then they will also be able to discuss other options with you.

You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.

I do not believe so...most factory stereos from that era do not have an exterior aux outlet, but you are probably considering the option of rigging something routed under the dash to plug into a possible connection on the rear of the enclosed box. It is not common for any such factory install to include an option for this. That is, don't expect to spend time and effort to dig under the dash to find a hidden aux port built in to the back of the audio unit. I have a Mazda 626 from 2001 and had no luck with this. (This car is essentially a Ford Contour, with a Mazda nameplate...albeit not a Tauraus, but very similar to it). M. Goodwin

This will depend largely on your vehicle. For details on installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on what you will need for an installation.

For details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on sizes, what will fit, and what you will need for an installation in your vehicle.

Here is the information we have for your vehicle. The rear side panel must be removed to access the subwoofer location. Extensive disassembly is required. Drill new screw holes to mount aftermarket subwoofer. Factory subwoofer has dual 2-ohm voice coils. The listed depth is 3.355". Hope this helps.

Yes

I had to order it over the phone and they sent it to me via email.

To see a complete list of direct-fit products we carry for your '06 F-150, use our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle. Hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=159

You would need to use the Metra 95-7510 Dash and Wiring Kit to install your Pioneer AVIC-8000NEX into the 2008 Mazda RX8. (link: http://www.crutchfield.com/p_120957510/Metra-95-7510-Dash-and-Wiring-Kit-Flat-Black.html?tp=3486 ) For further info or help, feel free to reach out to an Advisor at 888-955-6000; or chatting from our website. Hope that helps!

Given the detailed nature of your question(s), I think you'd be better served speaking one-on-one with an expert Advisor. You can reach them by phone (1-800-324-9695) or online chat via the "Contact Us" link at the top of our website. I hope that helps!

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

If you purchased the instructions from Crutchfield, feel free to contact our Tech Support team. They can walk you through the connections. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

If you purchase the MasterSheet installation instructions from Crutchfield, you will have access to our Tech Support team for assistance. Otherwise, you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

The Sony RSX-GS9 digital media receiver is the best sounding model we have ever had: http://www.crutchfield.com/p_158RSXGS9/item.html and we have the gear needed to install it into your Nissan Altima. Feel free to call an advisor on 1-800-324-9695 for a personal recommendation and help getting the gear you need to install it. My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=101

Thanks for your question. We don't have a lot of research information on your vehicle. What we do have says radio replacement is not recommended. If you have additional questions I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and see if there are any options available.

You can check to see if this will fit your vehicle by using our Outfit My Car tool: http://www.crutchfield.com/car/carselector.aspx For additional details on fit or installation please contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to pull up your vehicle and give you the details on if this will fit and what you will need for an installation in your vehicle.

You will want to contact an Advisor by phone (1-800-324-9695) or online chat to discuss compatibility with your factory system. They will be able to pull up your vehicle and see if this will integrate. If it does not, then they will also be able to discuss other options with you.

Our MasterSheet instructions cover the physical removal and replacement of the factory stereo and speakers; they do not cover alarm installation. We do provide lifetime tech support with every Crutchfield Purchase so, you can always call with any problems or questions regarding the installation or operation of your new alarm system: http://www.crutchfield.com/Support/TechSupport.aspx? I hope that helps! My Bio: http://www.crutchfield.com/Support/Bio.aspx?bio=5

Yes go ahead get the master sheet it will help with that problem. Make sure to connected and sader all connections.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. They can walk you through the settings on the product and see if there may be a fix. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

I would recommend reaching out to an Advisor by phone (1-800-324-9695) or online chat. They will be able to help!

Yes you can purchase and we'll email. Contact an Advisor by phone (1-800-324-9695) or online chat. They will be able to help you!

If you purchased the product from Crutchfield, feel free to contact our Tech Support team. Our toll-free Tech Support number is printed on your invoice, and is also available under the "My Orders" tab in the "My Account" section of our website. If you did not purchase the unit from Crutchfield, then you may want to contact the manufacturer. You can also post your question in our forums: http://community.crutchfield.com. Or try our online support center: http://crutchfield.custhelp.com/app/answers/list/kw/.

The one I received did. It was a lifesaver. For a simple install I wouldnt get it, but I had steering wheel controls amp, subs, and rear factory entertainmentry to consider...

This mastersheet doesn't come with wiring instructions. It's just a step by step on taking the dash apart. The wiring instructions will always come with the radio itself.

Hi Jessica. Wire diagrams are not included in the mastersheet. It mostly helped to understand how to take off the panels, head unit, and the back seat. You should be able to purchase the wiring harnesses from Crutchfield to make the connections, otherwise you'll have to shop around for the wiring diagrams.