About the Hertz MPK 130.3 PRO

Product highlights:
- component system includes 2 woofers, 2 tweeters, and 2 external crossovers
- 5-1/4" pressed pulp woofer with Boundary Free rubber surround
- 1-1/8" Tetolon dome tweeter
- crossover with tweeter level control (flat, +2dB)
- aluminum basket
- handles up to 100 watts RMS (200 watts peak power)
- frequency range: 60-22,500 Hz
- sensitivity: 91 dB
- impedance: 4 ohms
- woofer top-mount depth: 2-1/4"
- grilles included
- warranty: 2 years
- MFR # MPK 130.3
- Item # 301MPK1303
What's in the box:
Hertz MPK 130.3 PRO owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Two MP 130.3 Woofers
- Two MP 25.3 Dome tweeters (with attached 10" length of speaker wire)
- Two MPCX 2.3 Crossover networks
- 2 Tweeter flush mount trim rings
- 2 Tweeter flush mount clamps
- 2 Angled surface mount housings
- 2 OEM tweeter mounting brackets
- 2 Tweeter grilles (installed)
- 2 Woofer grilles
- Grille putty
- Sixteen 3/4" Screws (large head)
- Four 3/4" Screws (small head)
- Four 1/2" Flat head screws
- 8 Large speed clips
- 4 Small speed clips
- Owner's manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 21 Others)
- Templates on box
More details on the Hertz MPK 130.3 PRO

Features & specs
General | ||
---|---|---|
Speaker Size | 5 1/4 | |
Driver Design | 2-way | |
Woofer Design | Cone | |
Woofer Material | Pressed Pulp/Cotton Fiber | |
Woofer Surround | Rubber | |
Midrange Design | --- | |
Midrange Material | --- | |
Tweeter Design | 29mm Dome | |
Tweeter Material | Tetolon | |
Super Tweeter Design | --- | |
Super Tweeter Material | --- | |
Impedance (Ohms) | 4 | |
Weather-resistant | No | |
Grilles Included | Black, Steel mesh, Plastic frame | |
Parts Warranty | 2 Years | |
Labor Warranty | 2 Years | |
Specifications | ||
Sensitivity (1W at 1 meter) | 91 | |
Sensitivity at 2.83 volts | N/A | |
Frequency Response | 60 - 22.5k Hz | |
Maximum RMS Wattage | 100 | |
Peak Power Handling (Watts) | 200 | |
Top-mount Depth (Inches) | 2 5/16 | |
Bottom-mount Depth (Inches) | 2 1/2 | |
Cutout Diameter or Length (inches) | 4 1/2 | |
Mounting Height (Inches) | 0.398 | |
Frame Width | 5.107 | |
Frame Length | 5.107 |
Product Research
Features
Boundary Free Surround: This technology provides more woofer cone surface area than other speakers of the same size, enabling it to move more air. The surrounds are made of rubber, ensuring thermal and mechanical linearity.
Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and computer software to do large-scale analysis of drivers in motion, helps Hertz optimize the speaker's motor structure, voice coil alignment, and suspension to yield the best possible performance.
Woofer Grille: The three piece grille can be used several different ways. All three pieces (black plastic frame, gray plastic inner grill, and black steel mesh) can be mounted together. The frame and mesh can be mounted without the inner grille, the frame and inner grille can be mounted without the mesh, and the inner grille can be mounted alone.
Tweeter Mounting: Brackets are included for flush mounting, angled surface mounting (60° or 30°), and mounting behind the factory grille.
Tweeter Mounting Dimensions:
Flush Mount | 60° Angled Surface Mount | 30° Angled Surface Mount | Top Mount (behind factory grille) | Bottom Mount (behind factory grille) | |
---|---|---|---|---|---|
Mounting Height | 0.437" | 1.577" | 1.885" | 0.965" | 0.357" |
Depth | 0.628" | N/A | N/A | 0.1" | 0.708" |
Frame Diameter | 2.217" | N/A | N/A | 1.971" | 1.971" |
Cutout Diameter | 1.605" | N/A | N/A | 1.306" (minimum) | 1.798" (minimum) |
Frame Width | N/A | 1.787" | 1.787" | N/A | N/A |
Frame Depth | N/A | 1.883" | 1.562" | N/A | N/A |
Crossovers: Each crossover has a tweeter output level switch; choose between flat and +2dB. The crossover point is 3.5 kHz, the low pass slope is 6 dB/octave, and the high pass slope is 12 dB/octave. They have screw terminal inputs and outputs that will accept bare wire or spade connectors up to 0.315" wide.
Crossover Dimensions:
- Width: 4.02"
- Height: 1.47"
- Depth: 3.02"
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...