Samsung SWA-9200S

Features

Wireless Rear Speaker Kit: The Samsung SWA-9200S Wireless Surround Kit lets you add rear speakers to select 2021 and 2022 Samsung soundbars without all the wires. Together, the SWA-9200S Kit and your Samsung soundbar, can create a true surround sound experience with discrete rear channels. Enjoy an immersive, clutter-free experience and get great sound all around you by simply connecting the SWA-9200S Wireless Surround Kit to your compatible Samsung soundbar. It will bring a new dimension to your favorite TV shows and movie soundtracks.

Note: The Wireless Surround Kit consists of two speakers - a left rear speaker and a right rear speaker. The left speaker is equipped with the wireless module, features a built-in amplifier, and requires AC power. The rear speaker is passive and receives its amplification and audio signal from the left speaker by connecting the included 20' speaker wire between the two rear speakers.

Compatibility: The SWA-9200S Wireless Rear Speaker Kit is compatible with the following 2021 and 2022 Samsung Soundbars (all sold separately).

• 2022 Soundbar Models: Q600B, B650, B550
• 2021 Soundbar Models: Q600A, A650, A550, A450, S60A, S61A, S50A

Note: The SWA-9200S Wireless Rear Speaker Kit is not compatible with 2020 and earlier Samsung soundbars.

Wireless Module: The wireless module is built into the SWA-9200S Kit's left rear speaker and receives a wireless audio signal from a compatible Samsung soundbar. It has a wireless range of approximately 30'. This prevents you from having to run speaker wire all the way from the soundbar back to your rear speakers. However, you will need to run the included 20' speaker wire from the left speaker with the built-in wireless module over to the rear speaker for its audio signal.

Note: There is a Link button on the back of the left rear speaker that wirelessly pairs the speaker with a compatible Samsung soundbar.

Speaker Design: Each rear speaker of the SWA-9200S Kit houses a single 2" full-range driver in a bass reflex enclosure with a front-firing port. The left speaker employs a built-in 60 watt x 2 channel amplifier that powers both the left and right speakers. The included speaker wire will connect between the spring-clip terminals on the left and right speakers in order for both speakers to receive amplification.

Note: You can replace the included speaker wire with a higher quality speaker cable or longer speaker wire if needed. You can also use in-wall speaker wire if you are planning on wall-mounting the rear speakers and need to run speaker cable through the wall.

Mounting Options: The rear speakers can simply be placed on a stand (sold separately - see accessory list), end-table, shelf or or flat mounting surface. Each speaker of the SWA-9200S Wireless Rear Speaker Kit also contains an integrated keyhole slot on the back of the enclosure, so you can wall-mount them (mounting screws not included). The rear speakers should be placed on either side of your main listening position or directly behind the main listening position. The speakers should be positioned at ear level or just above ear level when seated in the main listening position.

Power Requirements: The left rear speaker that contains the built-in wireless module will need to be plugged into an AC power outlet using the included AC power adapter (attached 5' DC cord) and detachable 5' AC power cord. The right rear speaker is passive and does not require connection to an AC power outlet.