Customer Reviews

Great stands for larger desk speakers

Simple, sturdy, functional. These are a single piece of stamped steel with a powder coating and thin foam that cushions the stands and helps prevent the stands and your speakers from sliding around. No assembly required unless you decide to secure your speakers with a screw; I have not bothered. They're easily strong enough for a speaker the size of Kanto's YU6 or Audioengine A5+ wireless (pictured here). I like the angle. Highly recommended.

Have questions for
?

Crutchfield response on

S6

very easy to setup, have a small office and they fit right in

Have questions for
?

Crutchfield response on

Solid, well padded and attractive.

I was able to purchase these as an open box item and save a few dollars. Yes, the Kanto S6 stands are pricey, but you won't find a better desktop stand. They are solid, well padded, and attractive, and they tilt your speakers at a 16 degree angle which makes them sound much better. They can handle a fairly large speaker, up to 20lbs. I am using them with my KEF 150 speakers and they provide a very solid and stable base. I highly recommend them.

Have questions for
?

Crutchfield response on

Great build quality

Strong and stable enough even for a larger speaker than the ones for which they are intended!

Have questions for
?

Crutchfield response on

Kanto S6

Easy to assemble and looks great. They fully met my expectation.

Have questions for
?

Crutchfield response on

Well built and sturdy speaker stands

Perfect companion to go with the Kanto YU6 speaker. The stands are built like a tank.

Have questions for
?

Crutchfield response on

Kanto S6

These are awesome heavy well made stands to help them elevate and direct the sound at your ears. I did not want the bigger ones for my computer desk they would have been cool but overwhelming on my setup.

Have questions for
?

Crutchfield response on

High Quality

Well made, heavy, and sturdy.

Have questions for
?

Crutchfield response on

Works for me

Very sturdy metal..im using them for my center channel speaker ..the angle is perfect for dialog

Have questions for
?

Crutchfield response on

Works great, looks great!

Nice looking, very easy installation. Solved an intermittent feedback issue due to a sometimes uneven surface where the speakers are placed.

Have questions for
?

Crutchfield response on

Kanto S6

Works well for wharfdale d310 as a sound bar substitute,

Have questions for
?

Crutchfield response on

Big timer stands

Really well built and solid stands, adding a sleek look to my setup while helping to angle the speakers at the listener perfectly improving the sound quality of my setup. No wobble or shaking, nice and heavy, once you place them they stay put, highly recommend!

Have questions for
?

Crutchfield response on

Kanto S6

Very solid, look great and heavy! Excellent stands

Have questions for
?

Crutchfield response on

Solid and worth the price!

Very solidly built. Perfect together for my center speaker. I actually have my center speaker on the top of a cabinet over my TV pointing downward so I am using these a little differently than intended. They work great.

Have questions for
?

Crutchfield response on

Great stands.

These stands are very well made. They look fantastic with my Audioengine HDP6s sitting on them. The slotted hole in the center matched up with the screw hole in the bottom of the speakers. I'm using this setup as TV speakers after retiring my 20+ year old original Definitive BP10s. I needed to make room for a new TV console.

Have questions for
?

Crutchfield response on

Useful with my Dolby Atmos speakers

I got this pair of Kanto S6 speaker stands to use in a somewhat unorthodox way. I am using them to increase the angle of my Dolby Atmos speakers so as to direct their sound under/past a soffit in my living room which they are placed under. I initially wasn't sure if these would be able to hold my 6.5 pound PSB Imagine XA speakers. These stands appeared "spindly" to me in the photos. But when I learned that they were 3 pounds each and could hold speakers up to 20 pounds, I had to give them a try. The S6's definitely hold my PSB's with no problems at all and are very stable.

Have questions for
?

Crutchfield response on

Stands for a reason!!

Well made and solid stands. Make a real difference to just having them on a flat table. They isolate and elevate what is already excellent separation and soundstage from these speakers.

Have questions for
?

Crutchfield response on

Kanto S6

Well made. Solid construction. Speakers look dramatically more professional when mounted on these stands. Much improved audio "projection" verses just sitting flat. Very nice addition to an already great sounding speaker.

Have questions for
?

Crutchfield response on

Buy them

Perfect for my desk

Have questions for
?

Crutchfield response on

Kanto S6

These work perfectly for my Klipsch R-14Ms. If your speakers are close to the weight limit of the S4 stands, I think it makes sense to go up a size, especially if you have an eye to a powered set (or going a bit bigger). These seem pretty durable and don't really have any give, nor do they shake/wobble when the desk gets bumped.

Have questions for
?

Crutchfield response on

Kanto S6

Excellent.

Have questions for
?

Crutchfield response on

Awesome stands for the audioengine A5s

These are an excellent alternative to the foam blocks offered by audioengine. They look really nice when paired with the gloss white speakers. Build quality is excellent and they come with hardware to essentially anchor the speaker down with the bottom mount. I don't think that is needed given the weight of the speakers. Not much more I can think of that you'd want in a desktop speaker stand. Highly recommended.

Have questions for
?

Crutchfield response on

Fantastic desktop speaker stand

Great build quality, priced appropriately, perfect angle for my desktop Klipsch speakers. 5 stars all the way!

Have questions for
?

Crutchfield response on

Kanto S6

these are perfect for the person sitting on a couch listening to music, it puts the speaker at the right level to truly enjoy the sound.

Have questions for
?

Crutchfield response on

Kanto S6

Perfect fit

Have questions for
?

Crutchfield response on

Kanto S6

Perfect fit.... Speaker set up look amazing...

Have questions for
?

Crutchfield response on