About the Pangea Audio Vulcan X-Brace Amp Stand
An afforable way to minimize vibration
An afforable way to minimize vibration
Your high-performance power amp is susceptible to external vibrations. This Pangea Audio Vulcan amp stand eliminates virtually all vibrations, thanks to its X-braces. The stand can be assembled in minutes without tools.
Vibration-dampening construction
The shelf is made of 13/16"-thick vibration-dampening MDF coated in scuff-resistant vinyl. Steel spikes minimize contact with the floor — and its vibrations.The steel crossbraces add extra stability to the stand.
Product highlights:
- floor stand for power amplifiers
- 13/16-thick" vibration-dampening MDF shelf coated with protective vinyl
- supports up to 200 lbs.
- black powder-coated steel spike feet and X-braces
- bolt-together construction
- 23-1/4"W x 7-7/8"H x 21"D
- warranty: 2 years
- MFR # PGVUXAS-BLK-BLK
What's in the box:
Pangea Audio Vulcan X-Brace Amp Stand owner's manual
- Amp shelf
- 4 Support tubes
- 4 Braces
- 4 Feet
- 4 Spikes (hex-nuts attached)
- 4 Bolts
- 4 Mounting rings
- Assembly Instructions
Reviews (10)
Customer reviews for Pangea Audio Vulcan X-Brace Amp Stand
Loading reviews...
Average review:
5.0 out of 5 starsThanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Pangea Audio Vulcan X-Brace Amp Stand
Features & specs
| General Features | ||
|---|---|---|
| Type | Audio Stand | |
| Stand Style | Stand | |
| Color | Black | |
| Number of Shelves | 1 | |
| Number of Adjustable Shelves | None | |
| Number of Drawers | None | |
| Assembly Required | Yes | |
| Main Materials |
MDF Vinyl | |
| Wire Management | No | |
| Height (inches) | 7-7/8 | |
| Depth (inches) | 21 | |
| Stand Weight Limit | 200 lbs | |
| TV Shelf Weight Limit | N/A | |
| TV Shelf Width | --- | |
| TV Shelf Depth | --- | |
| Parts Warranty | 2 Years | |
| Labor Warranty | 2 Years | |
Product Research
Features
X-Brace Amp Stand: The Pangea X-Brace Amp Stand provides a solid support for power amps, monoblock amps, and other heavy gear at just the right height. Thanks to the unique design of the X-Brace Amp Stand, it is extremely stable and strong in addition to being acoustically neutral.
Open-Air Design: The Pangea X-Brace Amp Stand's open-air design is great for electronic components and gear. The design maximizes component ventilation and makes it easy tao install or remove gear.
Rigid Construction: The dense 0.8125" (thick) MDF shelf is wrapped in a special vinyl material in black, rosenut, or carbon fiber finish that is very easy to clean and resists scratching, scuffing, and most liquids. The front and sides of the shelf are contoured for a streamlined look. Its four steel support tubes and braces feature scratch-resistant and resonance-resistant black or silver sand powder coat paint. The unique X-Brace steel bolt-together design creates a super strong and ultra rigid stand.
Cone Feet & Spikes: The X-Brace Amp Stand features innovatively designed cone point feet and spikes. The steel floor spikes go all the way through the cones and into the bottom shelf tubes for greater strength and better energy transfer from the rack into the floor. The tapered cones are made of a very durable polymer, which dampens vibrations between the steel floor spikes and the steel rack tubes.
Note: The spike feet can scratch or damage wood, tile, laminate, and vinyl flooring. There are no protective discs or alternative feet included to protect floors.
Dimensions & Weight: The X-Brace Amp Stand's overall dimension are 23.75" wide, 7.875" high, and 21" deep. The usable shelf dimensions between the brace supports are 19.75" wide and 14.5" deep. The Amp Stand can support up to 200 lbs.
Loading accessories...
Customer Q&A
2 questions already asked
Loading articles...
Great turnaround time on delivery. I put it together in a few minutes with no tools and it seems rock solid "spiked" into the carpeted floor. Be sure and pay attention to the measurements because it's big.
Ronald from Peoria, AZ