Contact us
Close contact box
Connect ID #
673 042 916 4
Connect ID #
673 042 916 4
Don't wait on hold. We'll call you back when it's your turn to talk with the next available .
Please enter your name  
Please enter your phone number  
Please enter a message  

Calls may be recorded for training and quality control purposes.

We are located in Virginia USA.

Thank you. We will be calling you .
We're sorry. We have encountered a problem.

Dynaudio Sub 3 Powered subwoofer (Black Satin)

Item # 345SUB3B

At first glance the Dynaudio Sub 3 may look like an ordinary subwoofer.

At first glance the Dynaudio Sub 3 may look like an ordinary subwoofer.

1 question - 1 answer

Item # 345SUB3B

Shop all Dynaudio Powered Subwoofers

About the Dynaudio Sub 3

Kramer Crane

An elite subwoofer for music and movies

At first glance the Dynaudio Sub 3 may look like an ordinary subwoofer. But inside this compact enclosure lies a wealth of high-end speaker technology that helps it create powerful, seamless bass without standing apart sonically from your other speakers. 

An elite subwoofer for music and movies

At first glance the Dynaudio Sub 3 may look like an ordinary subwoofer. But inside this compact enclosure lies a wealth of high-end speaker technology that helps it create powerful, seamless bass without standing apart sonically from your other speakers. 

The Sub 3 is designed to complement Dynaudio's suite of bookshelf and floor-standing speakers. It's an ideal choice for accurate, hard-hitting bass as part of an elite stereo or home theater system.

Dynaudio Sub 3 powered subwoofer

The Sub 3 features a variety of connection options for your system (shown in white satin).

Precision is its middle name 

The Sub 3 was designed with sound quality in mind. Sure, it can shake the house. But this sub's forté is creating lifelike bass with precision, control, and finesse — all the way down to a staggering 22 Hz. 

This sub can provide delicate low-frequency details, as well as tirelessly pound out deep bass at high output levels with next to no distortion. You get the best of both worlds.

A fast, responsive woofer    

The Sub 3's 9-1/2" front-firing woofer uses Dynaudio's Magnesium Silicate Polymer (MSP) cone material, which combines low mass and high rigidity. This design allows the woofer to respond quickly and accurately to the dynamic peaks in music or movie soundtracks. 

An MSP cone is molded in one geometrically perfect piece, which helps to optimize sound dispersion. It also eliminates the need for a separate dust cap, further enhancing the cone's structural integrity.

High-tech construction for excellent sound

The Sub 3's excellent sound is partly due to its meticulous build quality. Its driver assembly uses a combination of high-tech materials to withstand mechanical stress. And its double-thickness front baffle lends to unwavering performance during the most demanding passages. 

A range of connection options

Some rooms call for more than one sub to achieve evenly distributed bass. The Sub 3's rear panel features a LFE out for daisy-chaining additional subs together without signal loss or degradation. 

There are also RCAs for running a high-pass-filtered signal to your receiver or amp's main inputs for connectivity — useful if you have an amp or pair of powered speakers that don't have a dedicated subwoofer output.

Dynaudio's DNA

Founded in 1977, Dynaudio is one of the world's premiere speaker companies. Their wide range of speakers for home, car, and pro audio applications are the result of a unique combination of innovative driver technology, state-of-the-art manufacturing, and true hand-craftsmanship. Dynaudio designs and builds all of its drivers at the company's HQ in Skanderborg, Denmark.


Product highlights:

  • frequency response: 22-175 Hz (±3 dB)
  • built-in amplifier delivers 300 watts of continuous power
  • MSP (Magnesium Silicate Polymer) cone material provides high efficiency and low distortion
  • long-throw 9-1/2" front-firing MSP woofer
  • acoustic suspension (sealed) cabinet design
  • continuously variable low-pass 50-150 Hz crossover
  • 3-position high-pass crossover switch for the "SAT" RCA outputs
  • rear-panel gain control
  • phase switch (0/180°)
  • auto on/off
  • left and right RCA line-level inputs and outputs
  • LFE input and LFE output for adding additional subs
  • beautiful black satin lacquer finish
  • 10-1/2"W x 10-9/16"H x 13-1/2"D
  • weight: 23.1 lbs.
  • warranty: 5 years woofer, 3 years amplifier
  • MFR # 920122

What's in the box:

  • Powered subwoofer
  • Grille
  • 6' AC power cord
  • Owner's Manual
  • Quick Start Guide
  • Warranty Extension Card

Customer reviews for Dynaudio Sub 3

Loading reviews...

Average review:

5.0 out of 5 stars
2 reviews

Thanks for submitting your review

Filter by rating

Customer photos

Customer provided image, click to load a larger version.
Customer provided image, click to load a larger version.

Sort reviews

Sort by:
Items per page:
View page:

Verified customer (What's this?)
Verified employee review (What's this?)

Reviewed on

This review was collected as part of a promotion



Crutchfield response
Customer provided image, click to load a larger version.
<< >>

More details on the Dynaudio Sub 3

Stacey B.

Features & specs

Enclosure Acoustic Suspension
Woofer Size (inches) 9 1/2
Woofer Composition Magnesium Silicate Polymer
Firing Direction Front
Amplifier Output (watts) 300
Frequency Response 22-175 Hz
Preamp-Level Inputs LFE, Stereo RCA
Speaker-Level Inputs No
Speaker-Level Outputs No
Wireless No
Low-Pass Crossover Freq 50-150Hz
High-Pass Crossover Freq 60Hz/80Hz/Flat
Phase Switch Yes
App Control No
Remote No
Other Info
Height (inches) 10-7/8
Width (inches) 10-9/16
Depth (inches) 14-3/8
Weight 23.1 lbs
Speaker Parts Warranty 5 Yrs/8 Yrs registered
Speaker Labor Warranty 5 Yrs/8 Yrs registered
Amplifier Parts Warranty 3 Years
Amplifier Labor Warranty 3 Years

Product Research


9.5" Long-Throw Woofer: The Dynaudio Sub 3 houses a 9.5" long-throw woofer with a MSP (Magnesium Silicate Polymer) cone, die-cast aluminum basket, and an aluminum voice coil for high power handling and high excursion with low distortion.

  • MSP (Magnesium Silicate Polymer): The woofer utilizes a proprietary composite of magnesium silicate polymer (MSP), a material that combines low mass, high rigidity, and ideal internal damping properties. Formed in a special manufacturing process, this membrane is a unique design with the distinctive, geometrically optimized form of the cone further enabling smooth sound dispersion.
  • Die-Cast Aluminum Basket: The MSP woofer uses a low-resonance, highly warp-resistant basket made of die-cast aluminum. Due to the stiffness of this non-magnetic material, the basket can be designed with aerodynamically formed ribs to reduce air compression behind the moving membrane. Another advantage is its long-term resistance against thermal, mechanical or other external influences.
  • Aluminum Voice Coil: By using an aluminum voice-coil instead of copper, it is possible to effectively double the coil's diameter without increasing its mass. Due to the thermal properties of aluminum, cooling of the voice coil is dramatically improved as well. In combination with the equally light voice coil former and powerful magnet materials Dynaudio uses, cone excursion is much more controlled and the driver follows the music signal from the amplifier with greater accuracy.

300 Watt Amplifier: The compact Sub 3 is the smallest high-performance powered subwoofer from Dynaudio and is equipped with a 300 Watt amplifier to deliver precise and dynamic bass for movie and music soundtracks.

Sealed Rigid Cabinet: For increased accuracy and rigidity, the Sub 3 utilizes an acoustic suspension (sealed) enclosure with a double-thickness 37mm, curved front-baffle. The Danish tradition of craftsmanship drives the meticulous process of selecting the perfect enclosure for the custom woofer. The front-baffle are manufactured using CNC (Computerized Numerical Control) machining. Computer-programmed and controlled by ultra-responsive sensors, precision to within a single micrometer (ìm), multi-axial drilling machines produce the acoustically optimized baffle shape and unique design details. Additional internal damping, strengthening, and bracing in critical sections of the cabinet substantially reduce unwanted resonance.

Controls: The Dynaudio Sub 3 offers a variety of rear-panel control to tailor the powered subwoofer to the rest of your speaker system.

  • Gain: The Gain control adjusts the output level of the powered subwoofer relative to the volume of the other speakers in the system, so there is a smooth blend of sound between your speakers and the Dynaudio Sub 3.
  • Low Pass Crossover: The built-in variable low pass crossover can be set between 50 and 150Hz. The low pass crossover allows the frequency range of the powered sub to be defined, so it only play frequencies at or below the selected cut-off frequency. The low pass crossover is only available when using the Sub 3's Sat/Sub input (does not affect LFE input).
  • Phase Setting: The Sub 3's Phase switch can be set to 0° or 180°. With this Phase setting you can adjust the timing relationship between the subwoofer and main speakers. If either the powered sub or your main speakers are slightly delayed in response in relation to the other, it can result in decreased bass output in the frequency response area where they overlap each other.
  • High Pass Filter: The Sub 3's Sat Output features a High Pass Filter which can be used to limit the amount of bass delivered to your main satellite loudspeakers. The High Pass Filter can be set to 60Hz, 80Hz, or Flat (full-range).

Inputs: The Dynaudio Sub 3 provides two different audio inputs - LFE Input (mono-RCA) or Sat/Sub Input (stereo RCA).

  • LFE Input: The LFE input consists of a mono-RCA jack and allows the LFE (Low Frequency Effect) output channel of your AV receiver to be connected to the powered subwoofer for reproduction of bass and low frequency effects. The Sub 3's low pass crossover control has no impact on the LFE input.
  • Sat/Sub Input: The Sat/Sub input consists of stereo jacks and allows the connection of full-bandwidth signal from your stereo receiver, integrated amplifier, or preamplifier. The Sub 3's low pass crossover control can be used to filter out high and midrange frequencies.
Note: You can choose to make both connection type between your receiver or integrated amplifier and the Dynaudio powered sub. Both signal types (filtered and  unfiltered) will be combined in the Sub 3. This allows the Sub 3 to reproduce both the LFE channel information, as well as the bass range of the connected satellite speakers.

Outputs: The Dynaudio Sub 3 features a Slave Output for daisy-chaining multiple powered subwoofer and a Sat Output for providing bass management to a power amplifier and satellite loudspeakers.

  • Slave Output: The Dynaudio Sub 3 can be used as stand-alone powered sub or together with multiple powered subwoofers, thanks to its Slave Output. The Slave Output consists of a mono-RCA jack which allows you to daisy-chain to another powered subwoofer's input. The Slave Output can be used with the Sub 3's LFE input or Sat/Sub input. The Master subwoofer will control the volume level of the Slave subwoofer. 
  • Sat Output: The Sat output consists of stereo RCA jacks that allow you to connect the powered subwoofer between your preamplifier and amplifier, so you can use the Sub 3 to apply a high pass crossover to your connected satellite loud speakers. 

Placement Options: Corner placement yields maximum bass boost, but potentially can cause uneven distribution of bass in the room. You can also place the subwoofer next to a wall, but away from the corner to provide adequate bass boost, but less than the corner placement. Placing the powered subwoofer away from the wall and corner will give the least amount of bass boost compared to wall or corner placement, but in general offers the best flexibility at achieving the most even bass distribution.

Auto On/Off: The Dynaudio Sub 3 will switch on automatically when it senses an audio signal, and will automatically turn off when there is no audio signal for approximately 20 minutes. There is also a manual Power On/Off switch on the back-panel.

Loading accessories...

Customer Q&A

1 question already asked

Loading articles...

Compare the sound