About the Roswell C920-1620

Trip the lights fantastically
With this Roswell remote combo on your boat, you'll be in full control of your Roswell R1 RGB LED light show. This marine-rated controller works with R1 speakers, subwoofers, and tower speakers and lets you choose from 20 pre-programmed colors and patterns. You can also access 15 music-responsive modes that let you design a light show that keeps time with your tunes.
Product highlights:
- two-piece remote/controller combo
- works with R1 speakers, subwoofers, and tower speakers
- 20 standard LED modes
- 15 music-responsive LED modes
- conformal coated circuit board for durability
- powers up to 430 watts of RGB LED's
- requires 2 AAA batteries (not included)
- warranty: 2 years
- MFR # C920-1620
What's in the box:
Roswell C920-1620 owner's manual
- RF Receiver/Controller
- Removable power and ground terminal (installed)
- 2 Removable RGB terminals (installed)
- Wireless remote control
- 2 AAA Batteries
- 6" Audio Y-adapter (male stereo 3.5mm plug on one end and two female stereo 3.5mm jacks on the other)
- 28" Retractable stereo extension cable (male 3.5mm plugs on both ends)
- Instructions
Customer reviews for Roswell C920-1620
Loading...
Loading reviews...
Thanks for submitting your review
Customer photos
This review was collected as part of a promotion
Pros:
Cons:
More details on the Roswell C920-1620

Product Research
Features
Controls:
- Power: on
- Power: off
- Color Wheel: choose color; capacitive touch
- Brightness: rocker switch
- Speed: rocker switch; change the speed at which the colors change in multi-color mode
- Color Mode: rocker switch; change
between color modes
- Static: choose one of the seven colors (white, cyan, purple, yellow, blue, green, or red)
- Cycle: blinks between all seven colors; speed adjustable
- RGB Cross-Fade: fades between red, green, and blue; speed adjustable
- Seven Color Cross-Fade: fades between all seven colors; speed adjustable
- Red/Green Cross-Fade: fades between red and green; speed adjustable
- Red/Blue Cross-Fade: fades between red and blue; speed adjustable
- Green/Blue Cross-Fade: fades between green and blue; speed adjustable
- Flash: single color flashing; choose one of the seven colors; speed adjustable
- Music Mode: rocker switch; change between
the music control modes; brightness and speed vary with the music
(connected to the line input)
- Single Color: choose any one of the seven colors to blink with the music (white, cyan, purple, yellow, blue, green, or red)
- Cycle: quickly cycles between all seven colors
- Seven Color Cross-Fade: gradual fading between all seven colors
- Red/Green Cross-Fade: fades between red and green
- Red/Blue Cross-Fade: fades between red and blue
- Green/Blue Cross-Fade: fades between green and blue
- Flashing Red: more intense than blinking
- Flashing Green: more intense than blinking
- Flashing Blue: more intense than blinking
- Sensitivity: rotary knob on receiver unit; adjusts sensitivity to the music input
Connections (receiver):
- Power/Ground: the removable 2-pin set screw Phoenix terminal accepts power and ground wires up to 14-gauge; Roswell recommends 18-gauge minimum
- RGB Output: there are two removable 4-pin RGB output set screw Phoenix terminals; each accepts bare wire up to 14-gauge; Roswell recommends 18-gauge minimum
- Line Input: 3.5mm stereo mini-jack input; allows integrating the lights with the beat of the music
Remote Dimensions:
- Width: 2⅛"
- Height: 1"
- Length: 4⅛"
Receiver Dimensions:
- Width: 2⅞" (4" including the knob and wiring)
- Height: 1"
- Length: 3⅜" (includes mounting flange)
Specifications:
- Remote Power Supply: 2 AAA batteries (included)
- Input Voltage: 12 or 24 volts DC
- Output Current: 18 amps max
- Maximum Output:
- 12 volt input: 216 watts
- 24 volt input: 432 watts
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...