About the Shadow-Caster SCM-10-GW-20

Product highlights:
- marine LED hull light with 10 single-color LEDs
- 42 watts of intense LED lighting
- manufactured in Clearwater, Florida, USA
- five colors to choose from
- clear gel-filled design keeps condensation and moisture out
- 316 stainless steel housing resists corrosion
- rugged polycarbonate lens
- IP68 fully-submersible waterproof design
- transient surge and reverse polarity protection prolongs unit life
- thermal throttling technology for safe operation even out of water
- 120-degree beam angle
- power draw: 42 watts
- current draw: 3.5 amps at 12 volts
- dimensions: 10" (254 mm) x 2.4" (61mm) x 0.5" (13mm)
- warranty: 2 years
- MFR # SCM-10-GW-20
- Item # 353M10GW20
What's in the box:
Shadow-Caster SCM-10-GW-20 owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Underwater light (Great White) w/attached 20' wire harness
- Two 1-1/2" screws
- Installation instructions
- Installation diagram
- Warranty information
- Product registration card
- Care & Cleaning instructions
More details on the Shadow-Caster SCM-10-GW-20

Product Research
Features
Overview: The Shadow-Caster SCM-10 series underwater light bar lets you add intense, colored LED lighting to your marine craft. Its low-profile design allows it to be mounted in a variety of locations. With an IP68 waterproof rating, the SCM-10 is fully submersible and can be mounted below the waterline.
Construction: The SCM-10 features a heavy-duty housing that's made with passivated 316 stainless steel, providing durable corrosion resistance. The ten built-in LEDs are protected by a tough polycarbonate outer lens, and the entire internal space is filled with a proprietary clear-gel that eliminates condensation and water intrusion while under stress.
LEDs: Ten built-in color LEDs provide up to 4000 lumens with a wide 120˚ beam angle. Thermal throttling technology enables safe LED operation, even when out of the water. Transient surge and reverse polarity protection help prolong LED life.
Power: The SCM-10 can operate on 10-30 volt systems, and consumes 3.5A (42 watts) of current @12V. A built-in 20' wiring harness gets run through the hull of your marine craft and attached to a power and ground source inside. The wire harness is encased in a heavy-duty outer jacket for added water- and damage-protection. The 3-wire harness includes:
- Red: +10-30V Power connection
- Black: Chassis ground
- Blue: This Pulse-Width Control (PWM)
wire is used to control the dimming and strobing functions integrated into
the light, via an optional Shadow-Caster Marine LED Lighting Controller
(sold separately).
Notes:
- Each installed SCM-10 underwater light should be wired to a 7.5A fuse/breaker circuit (not included) inside the craft. This allows it to handle the 3.5A nominal draw along with the current in-rush when first powered on.
- A 0.50" hole will need to be drilled through your marine craft's hull for running the attached cable.
Optional Colors: The Shadow-Caster SCM-10 series of marine underwater lighting is available in the following LED colors: Cool Red, Bimini blue, Ultra Blue, Great White, and Aqua Green. Two additional models can provide multi-color lighting. All can be found here.
Loading...
Loading accessories...
Customer Q&A
Loading...
Loading articles...
Best lights on the market.
Paul from Clearwater, FL