About the Furrion FCN48TASF

Product highlights:
- designed for RV and camper applications
- mounts on door or rear of vehicle
- 120-degree viewing angle
- camera resolution: 720 x 480
- infrared night vision view (16' distance)
- intelligent infrared cut filter
- built-in motion detector
- IP65 waterproof construction
- warranty: 1 year
- MFR # 2021123624
- Item # 355N48TASF
- California customers: Please click here for your Proposition 65 WARNING.
What's in the box:
Furrion FCN48TASF owner's manual
If you need assistance accessing this owner's manual, please give us a call.- Sharkfin doorway/rearview camera (attached 3" cable with 3.5mm TRS connector)
- Rubber mounting gasket (pre-installed on camera base)
- 80" Camera power cord (female 3.5mm jack on one end / bare-ended wires on other end)
- 4.25" Camera antenna
- Four 1/4" screws
- Four 7.5" wire ties
- Plastic grommet
- Camera installation instructions
- Warranty leaflet
- Barcode sticker w/ model# and serial#
More details on the Furrion FCN48TASF

Product Research
Features
Wireless Camera: The Furrion FCN48TASF wireless camera is designed to be installed either at the rear or over a doorway of an RV or camper, and is compatible with Furrion 2.4GHz wireless monitors and camera systems (sold separately). The camera features a 1/3" CMOS image sensor with a 120° diagonal viewing angle and 720 x 480 resolution. An attachable 4-1/4" antenna can be tilted and swiveled for best performance. The camera operates on a 2.4GHz wireless signal and has a range of up to 492 feet. Other key features of the camera include:
- Night Vision: Eight built-in Infrared LEDs can provide night vision up to approximately 16' behind the vehicle.
- Motion Detection: Built-in motion detection can pick up movement from behind the vehicle and display an alert on the monitor screen.
- Weatherproof: The camera carries an IP65 waterproof rating, making it impervious to weather.
- Pairing: A Pairing button, located on the bottom of the camera, lets you pair it to the monitor.
Compatibility: The Furrion FCN48TASF is designed to be used with Furrion
2.4GHz wireless monitors as well as Furrion wireless camera systems that allow
multiple camera connections. Compatible monitors and camera systems can be found
here.
Notes:
- Installation of the camera requires drilling into the outer body of the vehicle.
- The FCN48TASF is meant as a back-up aid only; never solely rely on the rear-view camera system when backing-up. In addition to using the rear-view camera, always look behind you to make sure everything is clear when backing up your vehicle.
- The FCN48TASF is not compatible with Furrion Vision 1 or Vision 2 systems.
Specifications:
- Image Sensor: 1/3" CMOS
- Resolution: 720 x 480 pixels
- Viewing Angle: 120° (rear & doorway)
- Waterproof Level: IP65
Loading...
Loading accessories...
Customer Q&A
1 question already asked
Loading...
Loading articles...